Hampshire · Fire damper testing
Fire damper testing in Wyck, Hampshire
Fire damper testing for Wyck and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Buildings with no damper register
- Dampers that stick or will not close fully
- Dust or grease build-up on damper blades
Fire damper testing for kitchens and businesses in Wyck
Not every damper relies on heat. Smoke dampers are motorised and are opened and closed by a control system, so we test them by operating them through those controls and confirming every blade travels fully and comes back. We’re often asked to deal with fire damper items raised by an assessor and motorised smoke dampers due for testing, across fusible link fire dampers, wall and floor dampers and offices and schools.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. A first test typically starts with finding them all.
The report is your system’s health record: a dated account with pictures of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Location
- Wyck (GU34)
- Region
- Hampshire
- Reporting
- Written report with photos
- Quote
- Fixed quote, normally within a working day
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Looking after it afterwards
To keep the system working properly between visits:
- Keep an eye out for damp around dampers
- Make sure access panels stay clear and usable
- Keep the damper register up to date after any building work
- Close off damper faults promptly
Put the next test in the diary within twelve months. BESA guidance is at least annual testing, so it helps to book it before the date slips.
Keep a damper register: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
In-house cleaning or a specialist?
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you can’t see still need a specialist at the right interval.
What happens on the day
We’re used to working while the site is closed. A lot of visits happen overnight or at weekends, so the site can open as normal afterwards. The visit itself takes from an hour or two in a small building to several visits on a large estate. A quick note on how to find the site and where to park makes a visit to Wyck run smoothly.
- We go through the damper schedule and any previous faults.
- We locate every damper and note any we cannot reach.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
How to prepare
- Have your last certificate or report to hand
- Mention any parking or loading restrictions
- Clear loose items from the work area
Get a fixed quote
Getting a quote doesn’t take long. Call or email with a few details and you’ll usually have a fixed price within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
Other services in Wyck
Wyck buildings and fire safety
Wyck is covered by Hampshire and Isle of Wight Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises. At about 43 miles from central London, Wyck sits well inside the area we cover. Evening, overnight and weekend visits are all possible.
If you manage a care home or clinic near Wyck, the testing that a hospital like Alton Community Hospital (about 3.2 miles west) relies on applies to your dampers too. School buildings such as Binsted Church of England Primary School are typically tested in the holidays, wherever they have dampers.
Wyck is about 3 miles east of Alton, in Hampshire. Whatever kind of site you run in Wyck, we can take on fire damper testing. Visits can be booked for evenings, overnight or weekends so the site keeps running. We cover 683 places across Hampshire, large and small. There’s also a page for Guildford, roughly 16 miles from Wyck.
Fire damper testing in GU34 follows the same survey, fixed quote and written report as everywhere else we cover. Other places close to Wyck include East Worldham (1 mile south-west), Neatham (1 mile north-west), Holybourne (2 miles north-west), Upper Froyle (2 miles north) and Hartley Mauditt (2 miles south-west). Further out, we also cover Basingstoke (11 miles north-west), Farnborough (12 miles north-east), Fleet (9 miles north), Aldershot (10 miles north-east), Alton (3 miles west) and Petersfield (10 miles south).
What’s near Wyck
Locally, jobs take us to businesses close to Eggar's School and the streets around them. Wyck’s nearest station is Alton station, about 2.2 miles west. A little further out are Alton Community Hospital (3.2 miles west) and Barley Pound (5 miles north-east). For a walk, there’s Deadwater Valley and Holybourne Hill.
What happens if it’s left?
Until a damper has been dropped, you can’t say whether it works. A test gives you a clear answer, and we can offer remedials for any that fail, and that’s something you can plan around. In a small place like Wyck, a system that fails can take a site out of use.
You won’t find a price list here, because each job is priced on what it involves. For a fixed quote, call us on 0345 646 2711 or use the quote form, and we’ll explain what it covers.
Why us?
- In business since 2009
- We are fully insured
- CHAS and SafeContractor accredited, with ISO 9001
- A written report with pictures after every visit
See our cost guide and our accreditations.
When it’s something else
An honest diagnosis matters more to us than a booking, so here’s what this work can’t put right:
- Holes around ductwork in fire-resisting walls
- Control wiring problems outside the damper itself
- Dampers that were never installed where they’re needed
If you are not sure, just call 0345 646 2711 or use the quote form and we will give you a straight answer.
What the work covers
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
- Wall and floor dampers
- Hospitals and care homes
- Offices and schools
FAQs for Wyck
Can you work in Wyck outside opening hours?
Yes, out-of-hours work is a big part of what we do. It means the site in Wyck keeps running as normal. Let us know the hours you are closed and we’ll book within them.
Do you work in villages like Wyck?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
What is TR19?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t law, but it’s the benchmark.
Are you fully insured?
Yes. Duct Doctor is fully insured, and we can share the details when you need them.
Do you carry out smoke damper testing?
Yes. Every smoke damper is driven through its controls and checked for full movement. If someone else looks after the controls, we plan the timing with you.
What paperwork do we get after testing?
The record we give you is a report of the tests for every damper on the visit. Any failures come with a note of the remedials needed.
Do we lose a day’s trading?
Not usually. We need the work area to ourselves while we are on site, so the visit goes in a quiet slot.
Does the law say we must follow TR19?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
For landlords and multi-site operators
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party, and the report can go to both.
What affects the quote in Wyck
We do not publish a price list, because no two systems are the same. What we look at:
- The number of sites or systems
- Access, including roofs, risers and ceiling voids
- How big the system is
- Any permits to work or inductions
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote, and the price is fixed before any work starts.
Asking for a quote
You do not need the technical terms. It helps if you can send:
- Any previous report or certificate
- Any symptoms, from odd noises to smells or leaks
- The times we could work without disrupting the site
- Where the site is and what kind of site it is
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before work begins.