Hampshire · Fire damper testing
Fire Damper Testing in Froyle
Fire damper testing for Froyle, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Gaps in the fire damper test log
- Motorised smoke dampers due for testing
- Dampers hidden with no access panel or hatch
What staff can safely do
In-house cleaning and specialist cleaning do different jobs. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Staff cleaning doesn’t replace a specialist visit; it supports it. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
How we handle fire damper testing in Froyle
Under BESA guidance, every fire damper is tested on completion of installation and then at least once a year. Spring-operated dampers need testing every year as a minimum. Our job is to do the testing and hand you the paperwork that shows it. The work covers hospitals and care homes, riser dampers and motorised smoke dampers, and common reasons people get in touch are dust or grease build-up on damper blades and fire dampers that fail to drop shut.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
Duct Doctor has been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we’re fully insured.
- Where
- Froyle (GU34)
- Wider area
- Hampshire
- Paperwork
- Report and pictures after the visit
- Price
- A fixed quote up front
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Looking after it afterwards
To keep the system working properly between visits:
- Keep cables and fixings away from damper blades
- Keep an eye out for damp around dampers
- Don’t let hatches get painted shut or boarded over
- Close off damper faults promptly
If we couldn’t get to a damper, the report says so and why, such as no access panel or a blocked hatch. We can fit access panels so they can be tested next time.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.
Why deal with it now?
Leaving damper testing for another year doesn’t make the dampers any more likely to work. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. A planned visit to Froyle is easier to arrange than an emergency callout.
We do not list prices on the website, because each job is priced on what it involves. For a fixed quote, call us on 0345 646 2711 or email us, and we’ll explain what it covers.
Why Froyle businesses choose us
- In business since 2009
- CHAS and SafeContractor accredited, with ISO 9001
- We diagnose before we treat
- A single point of contact for sites across the South East and London
Read how cleaning jobs are priced and how to check a contractor.
Fire damper testing around Froyle
Alton Community Hospital is the nearest hospital, about 4.5 miles south-west of Froyle. Healthcare buildings rely on fire compartments to protect people who cannot easily move, and dampers keep those compartments sealed. Froyle sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Hospitals such as Alton Community Hospital, about 4.5 miles south-west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Froyle, the same annual testing applies. Every damper we test around Froyle gets its own entry in the report, with photos.
Froyle is about 4 miles north-east of Alton, in Hampshire. Every kind of commercial site in Froyle, fire damper testing is something we can help with. Visits can be booked for evenings, overnight or weekends so trading isn’t interrupted. Froyle is one of 683 towns, villages and districts in Hampshire where we work for commercial clients. For sites nearby, see our Guildford page, about 15 miles away.
Our technicians cover all of GU34 for fire damper testing and the streets around it. If you need fire damper testing at premises on Park Lane, Westburn Fields and Barnfield Close or anywhere close by, our technicians can take on the work. Nearby, we also carry out fire damper testing in Lower Froyle (1 mile north-east), Upper Froyle (1 mile south-west), Neatham (2 miles south-west), Holybourne (2 miles south-west) and Wyck (2 miles south). Larger places within reach include Basingstoke (10 miles north-west), Farnborough (10 miles north-east), Fleet (7 miles north-east), Aldershot (8 miles north-east), Alton (4 miles south-west) and Petersfield (13 miles south).
What’s near Froyle
Typical jobs here are in premises near Hen And Chicken Public House and the streets around them. The nearest railway station is Bentley (Hampshire) station, roughly 2.1 miles east. Other landmarks nearby include Alton Community Hospital (4.5 miles south-west) and Barley Pound (3 miles north-east). Not far away are Holybourne Hill.
Froyle: your questions answered
Who is the fire and rescue service for Froyle?
Hampshire and Isle of Wight Fire and Rescue Service is the fire and rescue service for Froyle. A report listing every damper, its location and its result is the easiest way to show the dampers are maintained.
Can you get to a site in Froyle?
Yes. Villages and rural sites across the South East are part of our work, Froyle included. Let us know about access, parking and anything unusual about getting there when you book.
Is TR19 cleaning required by law?
No. The law sets the duty; TR19® is the benchmark used to show it’s met. Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person has to manage fire risk, and many insurers can refuse or reduce a claim without proof of cleaning.
How much does fire damper testing cost?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. We fix the price before work begins.
Can you fix fire dampers that fail?
The fault is recorded and explained in the report. We can then repair or replace the damper as a remedial job and test it again.
How do you protect the area?
We start with protection: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.
Do we need to close while you work?
Normally not. Booking the work out of hours means the site can carry on as normal. Larger jobs can be phased over several visits so parts stay in use.
Is a quote from pictures possible?
Yes, if we can see what we need. Otherwise, we book a survey at a time that suits the site, then a fixed quote.
Part by part
Access panels
Access panels sometimes get painted over, screwed shut or hidden by new ceilings. Letting us know where they are speeds the visit up.
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. Signs of corrosion or water are recorded so it can be dealt with.
Honest limits
We’d rather tell you now than book work that will not help, so here are the limits:
- Signing off a building’s overall fire safety
- Faults in the alarm or building controls that signal smoke dampers
- Holes around ductwork in fire-resisting walls
Not sure which it is? You can phone us on 0345 646 2711, or send details by email and we will tell you honestly.
Where we work
- Motorised smoke dampers
- Riser dampers
- Fusible link fire dampers
- Wall and floor dampers
- Offices and schools
- Hospitals and care homes
What affects the cost of fire damper testing
Every site gets its own quote. This is what makes a difference:
- How many systems or sites are involved
- What state the system is in
- When the work can happen, such as evenings, overnight or weekends
- Parking and loading at the site
The price reflects the work, not guesswork. That is why every job is surveyed first, and the price is agreed before work begins.
Helping us quote
Before you ask for a quote, gather:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Any access panels or hatches you can see
- The postcode and the type of business
- How we’d reach plant on a roof or in a plant room
Quotes are quick. Send a few details and pictures, and we usually reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
What happens on the day
On the day, we arrive at the time agreed with you, which is often after service, overnight or at a weekend. Equipment that has to be off is switched off and allowed to cool before we start, and floors and nearby surfaces are sheeted. On site, it takes a couple of hours for a few dampers, and a day or more across a big site. In a small place like Froyle, the journey is planned ahead and the visit arranged around the site’s hours.
- First we look at any damper register, drawings or earlier test reports.
- Dampers are located one by one and reached through their access panels.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
Before we arrive
- Make sure someone can let us in and lock up afterwards
- Tell us where we can park and unload
- Let us know how we reach the system, including roofs, risers and plant rooms
Getting a quote
Every quote begins with a look at the system, from your pictures and details or, where that is not enough, a survey on site. After that, you get a fixed price for the work so you know the cost before work begins.