Hampshire · Fire damper testing
Fire and smoke damper testing in Warsash
Professional fire damper testing in and around Warsash, booked around your opening hours and signed off in writing with photos.
- Dampers clogged with dust or grease
- Buildings with no damper register
- Fire dampers that haven’t been tested for over a year
Warsash: your questions answered
Do you work overnight in Warsash?
Yes, we can come after you close and finish before you open. It means the site in Warsash keeps running as normal. Let us know the hours you’re closed and we’ll book within them.
Does coastal air change anything about fire damper testing in Warsash?
It can. Being within about 1 mile of the sea means more corrosion on metalwork in Warsash than inland. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
What happens to the waste?
It’s contained and taken away. We collect grease, debris and waste water as we go, so it doesn’t spread.
Do you offer emergency callouts?
Yes, 24/7. Office hours are Monday to Friday, 8am to 6pm, with the emergency line covering every other hour.
What happens to dampers you cannot get to?
It’s noted as inaccessible rather than skipped. With an access panel fitted, it can be tested on a return visit.
How do you protect the area?
By covering it before any work starts. We keep the work contained and clean down when we finish.
How long will damper testing take?
A visit takes anything from a couple of hours for a handful of dampers to a full day for a large building. Bigger sites can be phased, and you can call 0345 646 2711 or email us to talk it through.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
Fire damper testing for kitchens and businesses in Warsash
Smoke dampers work differently from fire dampers. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and checking that each blade moves fully and returns. The work covers riser dampers, offices and schools and fusible link fire dampers, and people most often call us about buildings with no damper register and motorised smoke dampers due for testing.
Where there are care homes, schools or hotels around a place like Warsash, their dampers are often in the ductwork serving kitchens, plant rooms and corridors. We plan the work around the people using the building.
The report is your system’s health record: dated, with pictures, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Where
- Warsash (SO31)
- Wider area
- Hampshire
- Records
- Report and photos after the visit
- Quotes
- A fixed quote up front
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
How the job changes from site to site
Ceiling voids and risers
Many dampers sit above suspended ceilings. We lift tiles where needed and put them back as we found them.
Access panels
Where there’s no access panel, we record the damper as not tested and say why. Fitting a panel means it can be tested on the next visit.
Places near Warsash
Other services in Warsash
Between visits
So the system stays in good health:
- Keep damper test reports with the fire safety log
- Keep to at least yearly testing
- Brief other trades about dampers in ceilings and risers
- Close off damper faults promptly
Tell other contractors where the dampers are, and that they mustn’t tie, wedge or obstruct them. If a damper has been disturbed, have it tested again.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
What affects the cost of fire damper testing
You’ll get a fixed price before any work starts. It takes into account:
- How easy every part is to reach
- When the work can happen, such as evenings, overnight or weekends
- A single visit or a regular plan
- How many systems or sites are involved
When the work has to happen, how we reach it and how big the site is all affect the cost. We take each of them into account, and the price is fixed before any work starts.
Asking for a quote
A few details help us quote accurately. With your enquiry, please include:
- The site address and the type of premises
- Your last certificate, test record or report
- Wide photos of the system and the area around it
- When the site is open and when it’s quiet
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. Then we send a fixed price so you know the cost before we start.
How it works
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes a few hours for a single floor, with bigger buildings phased over more than one visit. A site near Warsash normally has room to park, so the questions are about access to the system and your hours.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Each one that passes is reset, ready to work.
- We report on every damper, with faults and suggested remedials set out.
Getting ready for the visit
- Mention any parking or loading restrictions
- Have your last certificate or report to hand
- Mention any sign-in, permit or induction we need
Get a fixed quote
If you need fire damper testing in Warsash, phone us on 0345 646 2711, or email photos. Let us know the site type and the opening hours, plus pictures or the previous report if they’re to hand. A fixed quote normally follows within one working day.
Related advice
Common problems we fix in Warsash
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either one can hold the blade part-open.
Look out for any of the following:
- Fire dampers nobody can get to
- Fire damper items raised by an assessor
- Fire dampers that haven’t been tested for over a year
- Buildings with no damper register
If you manage a school site such as Hook-With-Warsash Church of England Academy, any fire dampers can be tested in the holidays.
What to look for in a quote
- If the quote is a fixed price or an estimate
- Which accreditations they hold, and whether you can check them
- What hours they’ll be on site
- Whether the whole system is included, or only the parts that are easy to reach
Fire dampers in Warsash buildings
Sea air reaches Warsash, which sits within about 1 mile of the coast. A damper that has corroded can stay open when it should close, which is why coastal sites are worth testing carefully. Food Standards Agency records list about 5 schools, colleges and universities and about 15 hospitals, care homes and childcare premises registered as food businesses within about 1.5 miles of central Warsash. If any of them has ducted ventilation, its dampers need an annual drop test at least. About 0.9 miles north of Warsash is Coldeast, the nearest hospital. Where patients or residents may need help to leave a building, working dampers matter all the more.
If you manage a care home or clinic near Warsash, the testing that a hospital like Coldeast (about 0.9 miles north) relies on applies to your dampers too.
Warsash is about 4 miles west of Fareham, in Hampshire. If you need fire damper testing in Warsash, it’s easy to get a fixed quote: please phone us on 0345 646 2711 or email us. We work across South East England and London, including Warsash. Our area takes in 683 places across Hampshire, large and small. Southampton is in our area too, around 6 miles away.
Work in SO31 follows the same survey, fixed quote and written report as everywhere else we cover. You’ll find streets such as Church Road, Wild Rose Crescent and Willow Herb Close, all of which we cover for fire damper testing. If your site is just outside Warsash, we cover Sarisbury Green (1 mile north), Locks Heath (1 mile north-east), Hook (1 mile south-east), Hook Park Estate (1 mile south) and Abshot (1 mile south-east). We also work in nearby towns such as Winchester (14 miles north), Gosport (7 miles south-east), Havant (13 miles east), Eastleigh (8 miles north), Fareham (4 miles east) and Horndean (13 miles east).
What’s near Warsash
Locally, jobs take us to businesses close to Brookfield Community School and Language College, Hamble Common and Jolly Farmer Public House and the streets around them. For rail, the closest station is Swanwick station, roughly 1.6 miles north-east. Well-known places in the area include Coldeast (0.9 miles north) and Bursledon Brickworks Industrial Museum (2.1 miles north). Not far away are Holly Hill Woodland Park.
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but they do not reach the grease that builds up further in. That part needs specialist access and equipment.
What a clean won’t put right
We will not sell you work that does not address the problem, so these are the things it won’t cover:
- Missing dampers that a designer needs to specify
- Fire alarm or control system faults behind a smoke damper
- Signing off a building’s overall fire safety
Not sure which it is? You can call 0345 646 2711 or use the quote form and we will tell you honestly before booking.
What the work covers
- Offices and schools
- Hospitals and care homes
- Fusible link fire dampers
- Riser dampers
- Wall and floor dampers
- Motorised smoke dampers