Hampshire · Fire damper testing
Fire damper testing in Hook, Hampshire
Fire damper testing for Hook, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Fire dampers that haven’t been tested for over a year
- Smoke dampers that need testing through their controls
- Dampers clogged with dust or grease
When something else is needed
Some problems need a different service or another trade:
- Signing off a building’s overall fire safety
- Gaps in the wall or floor around the damper
- Fire alarm or control system faults behind a smoke damper
If in doubt, ring 0345 646 2711 or email us and we will say what we think before booking.
What we work on in Hook
- Fusible link fire dampers
- Wall and floor dampers
- Motorised smoke dampers
- Offices and schools
- Hospitals and care homes
- Riser dampers
How we handle fire damper testing in Hook
Testing finds the dampers that will not close. When one sticks, has a damaged link or is corroded, we report it and offer remedials rather than leaving you with a problem and no fix. The work covers riser dampers, offices and schools and hospitals and care homes, and common reasons people get in touch are rusted damper blades and springs and buildings with no damper register.
Testing in a small place like Hook is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Hook (SO31, PO14)
- Region
- Hampshire
- Records
- Report and photos after the visit
- Quotes
- A fixed price before we start
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Fire dampers in Hook buildings
Hook is within about 1 mile of the coast. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. The FSA’s food hygiene register lists about 4 schools, colleges and universities and about 10 care, childcare and hospital premises with registered kitchens or food service within about 1.5 miles of central Hook. Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. The fire and rescue service for Hook is Hampshire and Isle of Wight Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
Healthcare buildings such as Coldeast (about 1.7 miles north) rely on fire compartments, and the dampers in them need testing at least annually.
Hook is about 1 mile south-east of Warsash, in Hampshire. Anywhere in SO31, we cover fire damper testing for commercial sites. Hook is one of 683 places in Hampshire where we work for fire damper testing. You can also see our page for Southampton, roughly 7 miles from Hook.
All of SO31 and PO14 is covered for fire damper testing, from the main roads to the quietest streets. Nearby, we also carry out fire damper testing in Abshot (1 mile east), Hook Park Estate (1 mile south-west), Titchfield Common (1 mile north-east), Warsash (1 mile north-west) and Locks Heath (1 mile north). Further out, we also cover Winchester (15 miles north), Gosport (6 miles south-east), Havant (13 miles east), Eastleigh (9 miles north), Fareham (4 miles east) and Horndean (12 miles east).
What’s near Hook
We work in commercial kitchens and buildings around Hamble Common, Jolly Farmer Public House and Brookfield Community School and Language College, among other places. The nearest railway station is Swanwick station, about 2.2 miles north of the centre. Well-known places in the area include St Andrew's Castle (1.8 miles west) and Carron Row Farm Museum (2.2 miles north-east). The countryside around Hook includes Holly Hill Woodland Park.
What affects the cost of fire damper testing
We quote each job individually. These are the things that affect it:
- Any permits to work or inductions
- Access, including roofs, risers and ceiling voids
- Whether several sites go on one quote
- Travel, parking and unloading
The cost depends on how big the system is, the condition it’s in and how easy it is to reach. We give you a fixed price before work begins, so you know where you stand.
What we need to know
There’s no need for technical detail. Just send:
- Detail shots of panels, filters and grilles
- The roof, plant room or outside wall the system runs to
- The site address and the type of premises
- Problems your staff have spotted
Every quote begins with a look at the system, either from photos and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before we start.
How it works
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. The visit takes a morning or an afternoon for a small number of dampers, longer where there are many. A few photos of the system help us make the most of a visit to a place like Hook.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- We test fire dampers by dropping them and smoke dampers by operating them through the controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Preparing for the visit
- Let us know about parking and loading
- Move anything stored near the system
- Allow time for equipment near the work to be turned off and cool down
How to get a quote
There’s no standard price list, because every site is different. We look at your system first, from photos or on a visit, then send a fixed quote. To get going, call us on 0345 646 2711 or drop us a line.
Advice
What we’re called out for in Hook
Dust settles on damper blades, runners and springs over the years. Where the duct carries grease or cooking vapour, grease coats them too, and either one can hold the blade part-open.
The symptoms we’re asked about most include:
- Rusted damper blades and springs
- Dampers hidden with no access panel or hatch
- Fire dampers with no recent test record
- Dampers flagged on a fire risk assessment
For schools like Locks Heath Infant School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What to look for in a quote
- How VAT is shown on the quote
- Whether the price is fixed
- Exactly which parts of the system are covered
- What insurance they carry
Other services in Hook
Keeping the system healthy
Aftercare is simple, and it makes the next visit easier:
- Report leaks or condensation near ductwork quickly
- Keep damper test reports with the fire safety log
- Close off damper faults promptly
- Update the register when ductwork changes
Put the next test in the diary within twelve months. The guidance is at least once a year, and booking the same month each year keeps it simple.
Clean ductwork means less dust and grease reaching the dampers. It makes sense to plan duct cleaning and damper testing together.
What happens if it’s left?
A damper that is stuck open gives fire and smoke a route straight through a fire-resisting wall. The rest of the compartment can be built perfectly and still be bypassed by the duct. It’s far better to find that out on a test than in a fire. It’s simpler to plan the work at Hook now than to arrange it in a hurry later.
A single site or a whole portfolio, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before work begins.
Why us?
- Work around your opening hours, with 24/7 emergency cover
- Photo reports with every job
- Fully insured
- We diagnose before we treat
Different parts, different methods
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. We note any rust or water damage on the report so it can be dealt with.
Offices and retail
In shared buildings, some dampers sit inside tenants’ space. Access to each area is planned with whoever manages the building.
Hook questions
Who enforces fire safety at workplaces in Hook?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Hook. If a fire safety officer audits the building, they may ask for the latest damper test records.
Can a school’s dampers in Hook be tested out of term time?
Yes, out-of-term visits are normal for schools. There are about 4 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Hook. You can ring 0345 646 2711 or email us with the dates the site is empty.
Does the law say we must follow TR19?
No. TR19® itself isn’t law; it’s a BESA specification. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and cleaning to TR19® is the recognised way to show grease is under control.
Do you offer emergency callouts?
Yes, day and night, every day of the year. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
How often should fire dampers be tested?
BESA guidance is that fire dampers are tested on completion of installation and at least annually after that. Spring-operated dampers need annual testing as a minimum.
What if a fire damper won’t close?
We record the damper as failed, with the reason, such as a sticking blade, corrosion or a damaged link. We offer remedials to repair or replace it, and test it again afterwards.
Can you price the work without visiting?
Yes, for many jobs. Send wide shots, close-ups of any access panels and anything that worries you, and a fixed quote normally follows within one working day. If pictures aren’t enough, we will survey first.
What do you do with what you remove?
It leaves the site with us at the end of the visit. During the work, it’s contained to keep the area clean.