Oxfordshire · Fire damper testing
Fire damper inspection in Tetsworth
Our technicians work in Tetsworth on fire damper drop testing and smoke damper testing, with a record for each damper. Fixed quotes, work around your opening hours and photo reports as standard.
- Blades that jam part-way when released
- Fire dampers that haven’t been tested for over a year
- Fire dampers nobody can get to
Different parts, different methods
Access panels
Where there’s no access panel, we record the damper as not tested and say why. We can fit access panels so it’s tested next time.
Offices and retail
In offices and retail units, dampers tend to be hidden above working areas. Testing can be done outside opening hours to keep disruption down.
How we handle fire damper testing in Tetsworth
Smoke dampers work differently from fire dampers. A smoke damper is driven by a motor and responds to signals from its controls, so we test them by operating them through those controls and confirming every blade travels fully and comes back. If you have fire damper items raised by an assessor and dampers clogged with dust or grease, we can help.
Somewhere as small as Tetsworth, fire dampers are normally found in a school, a care home, a hotel or a converted building, wherever there is one. Each damper still needs testing at least once a year.
The sign-off is always in writing: a dated report with pictures of the work, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Location
- Tetsworth (OX9)
- Wider area
- Oxfordshire
- Paperwork
- Report and pictures after the visit
- Quote
- A fixed price before work begins
- Working hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Tetsworth questions
Can you test school fire dampers in Tetsworth out of term?
Yes, out-of-term visits are normal for schools. Around Tetsworth, the Food Standards Agency lists about 2 schools and colleges with registered kitchens within a mile and a half or so. Just give us a ring on 0345 646 2711, or send details by email with your term dates and we will plan around them.
Can you work in Tetsworth outside opening hours?
Yes, nights and weekends are routine for us. The work in Tetsworth can fit around your hours. When you ring 0345 646 2711 or drop us a line, mention when the site is quiet.
How long does fire damper testing take?
It takes a couple of hours for a few dampers, and a day or more across a big site. Access is the biggest factor, so we’ll confirm the time when we quote.
What does fire damper testing cost?
There’s no set price, as it depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before work begins.
How do you keep the site clean during the work?
Floors and surfaces near the work are sheeted before we start, and anything we remove is contained. At the end, the area is cleaned down.
What happens if you can’t reach some of it?
The report shows them clearly. Often the fix is extra access, such as new panels in ductwork, which we can install.
Do you offer maintenance contracts?
Yes. Send details of the systems and how they’re used and we will propose a schedule with a fixed quote.
What paperwork do we get after testing?
Our paperwork is a test report, not a certificate of compliance. It lists each damper, the result and any remedials needed.
What we do, step by step
We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a morning or an afternoon for a small number of dampers, longer where there are many. For a village or hamlet like Tetsworth, tell us about narrow lanes, gates and parking when you book.
- First we look at any damper register, drawings or earlier test reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Mention any locked doors, roof access or ceiling voids
- Tell us where we can park and unload
- Let us know about permits to work or site inductions
Ask for a quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Advice
Do you need fire damper testing in Tetsworth?
Dust settles on damper blades, runners and springs over the years. If the duct carries cooking vapour, a film of grease adds to it, and either one can hold the blade part-open.
If you notice any of these, it’s worth a diagnosis:
- Damper actions from a fire risk assessment
- Corroded dampers in damp risers and plant rooms
- Fire dampers nobody can get to
- Dust or grease build-up on damper blades
Site managers at schools such as Tetsworth Primary School usually find the summer break the easiest time for ceiling work like damper testing.
Before booking anyone
- How VAT is shown on the quote
- Whether a survey comes first
- How areas they can’t reach will be recorded
- Proof of accreditation you can verify
What staff can safely do
Keep a record of what your team does. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
How we price fire damper testing
A fixed price needs a few facts first. We look at:
- How easy every part is to reach
- Whether several sites go on one quote
- How big the system is
- The times the site is available
Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered, and you will get one fixed quote.
What we need to know
The more you tell us, the more accurate the quote. With your enquiry, please include:
- Photos showing the whole system and its surroundings
- Any previous report or certificate
- The postcode and the type of business
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Getting a quote doesn’t take long. Call or email with a few details and you’ll typically have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Fire dampers in Tetsworth buildings
Tetsworth sits within the area of Oxfordshire Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. We cover Tetsworth, about 42 miles from central London, as part of our work across London and the South East. Visits are booked around your hours, evenings and weekends included.
Historic buildings that have had ventilation added later can hide dampers in awkward places; Adwell House, about 1.4 miles south, is one of the historic houses in the area around Tetsworth. Thame Community Hospital, about 2.8 miles north-east of Tetsworth, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Tetsworth is about 3 miles south-west of Thame, in Oxfordshire. For fire damper testing in and around Tetsworth, it’s easy to get a fixed quote: please call us on 0345 646 2711 or send us an email. Our area covers London and the South East, including Tetsworth. Tetsworth is one of 443 towns, villages and districts in Oxfordshire where we work for fire damper testing. For sites nearby, see our Oxford page, about 10 miles away.
Fire damper testing in OX9 follows the same survey, fixed quote and written report as everywhere else we cover. If you need fire damper testing at premises on High Street, Swan Gardens and Back Street or a nearby road, we can help. Nearby, we also carry out fire damper testing in North Weston (2 miles north), Milton Common (3 miles north-west), Albury (3 miles north-west), Great Haseley (3 miles west) and Tiddington (3 miles north-west). Larger places within reach include Oxford (10 miles west), Didcot (12 miles south-west), Bicester (15 miles north-west), Abingdon-on-Thames (12 miles west), Thame (3 miles north-east) and Henley-on-Thames (13 miles south).
Local landmarks in Tetsworth
In Tetsworth, that means kitchens and buildings near The Swan pub, among other places. For rail, the closest station is Haddenham & Thame Parkway station, about 5 miles north-east. Well-known places in the area include Thame Museum (2.9 miles north) and Thame Community Hospital (2.8 miles north-east). Green spaces nearby include Wells Farm and Bald Hill.
Also near Tetsworth
More services for Tetsworth
Multi-site and managed buildings
We also work for facilities teams across offices, schools and healthcare in Tetsworth and across Oxfordshire. Work can be phased by floor, building or site to keep disruption down.
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
When it’s something else
A few issues sit outside what this work can do:
- Designing the building’s fire compartments
- Control wiring problems outside the damper itself
- Sign-off of the whole building’s fire safety
If you’re not sure, just call us on 0345 646 2711, or email photos and we will give you a straight answer before booking.
What the work covers
- Hospitals and care homes
- Offices and schools
- Motorised smoke dampers
- Fusible link fire dampers
- Riser dampers
- Wall and floor dampers