Oxfordshire · Fire damper testing
Fire damper testing in Swerford, Oxfordshire
Professional fire damper testing in and around Swerford, booked around your opening hours and signed off in writing with photos.
- Dust or grease build-up on damper blades
- Fire damper items raised by an assessor
- Blades that jam part-way when released
Fire damper testing in Swerford
We are often asked to take on annual damper testing by the people who look after buildings in and around Swerford. Send us the damper schedule or the drawings if you have them, and we’ll plan the visit around the building’s hours. The work covers motorised smoke dampers, fusible link fire dampers and riser dampers, and people most often call us about fire damper items raised by an assessor and dirty dampers that may not close.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. A first test normally starts with finding them all.
Every visit ends with a written report and photos, so you have a record of what was done and when. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Place
- Swerford (OX7)
- Wider area
- Oxfordshire
- Paperwork
- Report and photos after the visit
- Quote
- Fixed quote, usually within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Fixed quotes for fire damper testing in Swerford
The survey tells us what the work involves. We look at:
- Where the site is and how we reach it
- The condition of the system
- When the work can happen, such as evenings, overnight or weekends
- A single visit or a regular plan
The cost depends on how big the system is, what state it’s in and access to every part of it. You get a fixed price before work begins, so there are no surprises.
Helping us quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- The postcode and the type of business
- Any access panels or hatches you can see
- Photos showing the whole system and its surroundings
- The roof, plant room or outside wall the system runs to
For fire damper testing in Swerford, call us on 0345 646 2711 or send us an email. Tell us what kind of premises it is and when it’s open, and send photos or your last report if you can. We usually send a fixed quote within one working day.
What we’re called out for in Swerford
Rust is a frequent reason a damper won’t close. Water leaks, condensation and damp plant areas attack the casing, blade and spring, so a damper can seize without anyone noticing.
Keep an eye out for any of the following:
- Rusted damper blades and springs
- Smoke dampers that need testing through their controls
- Missing or out-of-date damper records
- Damper actions from a fire risk assessment
Around Swerford, a damper with no access panel is noted, and a panel can be fitted.
What to look for in a quote
- Whether the price is fixed
- When they can work, and whether that’s outside your opening hours
- What insurance they carry
- Whether a survey comes first
Managing agents and facilities teams in Swerford
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, which may be the employer, owner, landlord, FM or managing agent. Where responsibility is shared, records matter even more.
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side and send the paperwork to whoever needs it.
Towns and villages near Swerford
Also in Swerford
Keeping the system healthy
No system stays clean for ever, but care slows the build-up. Our tips:
- Keep ceiling hatches and duct panels easy to open
- Report leaks or condensation near ductwork quickly
- Store test records alongside the fire risk assessment
- Never wedge or tie a damper open
Put the next test in the diary within twelve months. BESA guidance is at least annual testing, and booking the same month each year keeps it simple.
Keep a damper register: where each damper is, what kind it is and when it was last tested. It stops dampers getting lost as the building changes.
Fire damper testing around Swerford
Oxfordshire Fire and Rescue Service covers Swerford. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Around Swerford, as anywhere, each damper is released, checked, reset and recorded.
Swerford is about 7 miles south-west of Banbury, in Oxfordshire. Anywhere in OX7, we can carry out fire damper testing at your premises. Across Oxfordshire, we cover 443 places, and Swerford is one of them. We also work in Oxford, around 18 miles away.
All of OX7 is covered for fire damper testing, from busy streets to back roads. Whether your site is on Chapel Hill and St Mary's Lane or anywhere close by, we can help. Nearby, we also carry out fire damper testing in Wigginton (1 mile north-east), Little Tew (2 miles south), Great Tew (2 miles south-east), Hook Norton (2 miles north-west) and South Newington (2 miles north-east). Further out, we also cover Banbury (7 miles north-east), Bicester (14 miles south-east), Witney (13 miles south), Kidlington (13 miles south-east), Bure Park (13 miles east) and Chipping Norton (5 miles south-west).
Landmarks near Swerford
Around Swerford, our work takes us to kitchens and buildings near The Boxing Hare pub, among other places. Well-known places in the area include Old Forge Museum (Great Tew) (1.6 miles south-east). Open spaces near Swerford include Woodford Bottom and Lamb's Pool.
How the visit works
Your staff do not need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and we take it from there. Afterwards, the area is left tidy and the written report follows. Rural roads and tight entrances are worth telling us about before a visit to Swerford.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Preparing for the visit
- Mention any locked doors, roof access or ceiling voids
- Tell us the best time to work, such as after service or at a weekend
- Find the previous report, if there is one
Ask for a quote
To help us quote: where the site is, what it is and its opening hours, a few pictures and the last certificate or report, if there is one. Then ring 0345 646 2711 or use the quote form.
Related advice
Part by part
Ceiling voids and risers
Many dampers sit above suspended ceilings. Ceiling tiles are lifted for access and replaced afterwards.
Schools, hospitals and care homes
Schools are often easiest to test during the holidays, with no classes to work around.
Swerford: your questions answered
Can you come to Swerford after we close?
Yes, nights and weekends are routine for us. The work in Swerford can fit around your hours. Let us know the hours you are closed and we will book within them.
Is Swerford within the area you cover?
Yes, Swerford is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
What happens if you cannot reach some of it?
Anything we cannot reach goes on the report, with photos where possible, and we explain what access is needed, such as extra access panels in ductwork.
Do you have a 24/7 line?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line and we will talk you through the next steps.
Can you set up regular visits?
Yes, of course. Send details of the systems and how they’re used, and we will suggest a schedule and quote for it.
Do you carry out smoke damper testing?
Yes. We test smoke dampers through their control system, as they’re motor driven. We check every blade moves fully and record the outcome.
What does TR19 mean?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It sets out inspection, cleaning and record keeping, and it takes a risk-based approach.
What do you need from me for a quote?
A short description and a few pictures plus the address and your hours. We’ll ask for anything else we need.
Why it’s worth doing now in Swerford
A damper that is stuck open gives fire and smoke a route straight through a fire-resisting wall. Everything else about the compartment can be right and the duct still lets it down. Testing now is how you find out before it matters. Rural sites can’t always move to another kitchen or room when something fails.
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we will go through it with you.
What you get with us
- A single point of contact for sites across the South East and London
- In business since 2009
- Accredited under CHAS and SafeContractor, with ISO 9001
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Take a look at how cleaning jobs are priced and our accreditations.