Oxfordshire · Fire damper testing
Fire and smoke damper testing in Spelsbury
Specialist fire damper testing for Spelsbury: diagnosis first, then a fixed quote, the work and a report with photos. Ask us for a fixed quote.
- Dirty dampers that may not close
- Smoke dampers with no recent test
- Buildings with no damper register
Part by part
Offices and retail
Multi-let buildings may have dampers inside tenant areas. Access to each area is planned with whoever manages the building.
Smoke dampers
Testing smoke dampers sometimes needs input from whoever looks after the control system. We agree the arrangements with you in advance.
Fire damper testing for kitchens and businesses in Spelsbury
Some dampers haven’t been tested since the day they went in. Ceilings have gone up, access panels have been covered or lost, and the records have gone missing. We locate and test the dampers we can reach and record the ones we can’t, so you know where the gaps are. Typical jobs include fire dampers with no recent test record and dust or grease build-up on damper blades, across offices and schools, fusible link fire dampers and wall and floor dampers.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, and the dampers in them are easily forgotten. A first test usually starts with finding them all.
The report is your system’s health record: a dated account with photos of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.
- Where
- Spelsbury (OX7)
- Region
- Oxfordshire
- Paperwork
- Written report with pictures
- Quote
- A fixed price before any work starts
- When we work
- Overnight and weekend work, 24/7 emergency callout
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Staff cleaning versus specialist work
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease need training, the right equipment and safe access. That’s our job.
What a clean won’t put right
We will always give you a straight diagnosis, so here’s what this work cannot put right:
- Holes around ductwork in fire-resisting walls
- Control wiring problems outside the damper itself
- Designing the building’s fire compartments
If you’re not sure, just call 0345 646 2711 or send us an email and we’ll give you a straight answer before booking.
Parts of the system we cover
- Riser dampers
- Fusible link fire dampers
- Offices and schools
- Wall and floor dampers
- Motorised smoke dampers
- Hospitals and care homes
What else we do in Spelsbury
How we price fire damper testing
The diagnosis comes before the price. The main factors are:
- One-off work versus a regular cycle
- Travel, parking and unloading
- The condition of the system
- How big the system is
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we will go through it with you.
Asking for a quote
What to send for a quote:
- Any previous report or certificate
- When the site is open and when it’s quiet
- Photos showing the whole system and its surroundings
- Close-ups of filters, grilles, hatches or access panels
Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before we start.
What happens on the day
A visit follows the same order every time: protect the area, isolate whatever needs isolating, do the work, tidy up and hand over the paperwork. On site, the work takes a couple of hours for a few dampers, and a day or more across a big site. If the van will struggle with a lane or gateway near Spelsbury, let us know and we will plan around it.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- The results go into a report, with failed dampers and remedials listed.
Getting ready for the visit
- Let us know about parking and loading
- Mention any sign-in, permit or induction we need
- Plan for cooking equipment or plant to be off before we arrive
Getting a quote
Quotes are quick. Send a few details and pictures, and we normally reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
For landlords and multi-site operators
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
Facilities teams in offices, schools and healthcare sites book us too in Spelsbury and across Oxfordshire. Larger estates can be phased building by building around the people who use them.
Fire damper testing in Spelsbury: local notes
Spelsbury sits within the area of Oxfordshire Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
A school like Chadlington Church of England Primary School can have any dampers tested over half-term without disturbing lessons.
Spelsbury is about 7 miles north of Witney, in Oxfordshire. From the centre of Spelsbury to the outskirts, we cover fire damper testing for every kind of premises, from small sites to large estates. We cover 443 places across Oxfordshire, from busy centres to quieter spots. Oxford is in our area too, about 15 miles from Spelsbury.
Every address in OX7 is within our area for fire damper testing, from the main roads to the quietest streets. Streets in the area include Quickset Close and Chadlington Road, and we cover them all for fire damper testing. Nearby, we also carry out fire damper testing in Charlbury (2 miles south-east), Fawler (3 miles south-east), Finstock (4 miles south), Stonesfield (4 miles south-east) and Ramsden (4 miles south). Larger places within reach include Oxford (15 miles south-east), Banbury (13 miles north-east), Bicester (14 miles east), Witney (7 miles south), Carterton (10 miles south-west) and Kidlington (10 miles south-east).
Landmarks near Spelsbury
Spelsbury’s nearest station is Charlbury station, about 1.5 miles south of the centre. Other landmarks nearby include Chipping Norton Museum (3.9 miles north-west). Open spaces near Spelsbury include Blenheim Farm.
Do you need fire damper testing in Spelsbury?
Building work often happens right next to dampers. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
These are the problems we see most often:
- Corroded dampers in damp risers and plant rooms
- Blades that jam part-way when released
- Dampers hidden with no access panel or hatch
- Dirty dampers that may not close
Every damper we test around Spelsbury gets its own entry in the report, with photos.
What to look for in a quote
- If they look at the system before pricing
- When the next visit should be, and why
- Proof of accreditation you can verify
- Whether the work can be done while the site is closed
Common questions in Spelsbury
Which fire and rescue service is responsible for Spelsbury?
It’s Oxfordshire Fire and Rescue Service, which covers Spelsbury. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Can the work in Spelsbury be done at night or at weekends?
Yes, we can come after you close and finish before you open. The work in Spelsbury can fit around your hours. Your opening times are the first thing we ask for.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
Do you certify fire dampers?
We test, record and report, rather than certify dampers to a standard. It lists each damper, the result and any remedials needed.
What information do you need?
A short description and a few pictures, with the address and opening hours. We’ll ask for anything else we need.
Do we need to close while you work?
Normally not. Out-of-hours visits keep the disruption down. Bigger sites can be done in stages to keep things running.
What does fire damper testing cost?
Size, condition, access and working hours all affect the cost. Ask us for a fixed quote, usually ready within one working day.
Do you have insurance?
Yes. We carry full insurance and have been trading since 2009.