Oxfordshire · Fire damper testing
Combe fire damper testing
Fire damper testing for Combe, with a survey first and a report with photos at the end. Call for a fixed quote.
- Fire dampers that fail to drop shut
- Buildings with no damper register
- Dirty dampers that may not close
About our fire damper testing in Combe
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. The work covers hospitals and care homes, fusible link fire dampers and offices and schools, and common reasons people get in touch are rusted damper blades and springs and fire dampers nobody can get to.
In rural areas, conversions, country hotels and care homes can have ductwork crossing fire-resisting walls, where the dampers are easy to overlook. The first visit starts by locating each damper.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Combe (OX29)
- Wider area
- Oxfordshire
- Records
- Report and pictures after the visit
- Quotes
- Fixed quote, normally within a working day
- When we work
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Your questions about fire damper testing in Combe
Do you work in villages like Combe?
Yes. Villages and rural sites across the South East are part of our work, Combe included. Photos of the system and directions to the site help us plan the visit.
Can the work in Combe be done at night or at weekends?
Yes, nights and weekends are routine for us. The site is handed back ready to open. Let us know the hours you are closed and we’ll book within them.
How much does fire damper testing cost?
It depends on the site, so we quote each one individually. For a quote, call 0345 646 2711 or send us an email with the site type, opening hours and a few pictures.
What does TR19 mean?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It sets out inspection, cleaning and record keeping, and it takes a risk-based approach.
What do you need from me for a quote?
The site address, the type of premises and your opening hours, along with a few photos and any previous report.
Do you carry out smoke damper testing?
Yes, as well as drop testing fire dampers. The results go into the same report, so you have one record.
Which sectors do you work in?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, as well as food production and leisure sites.
Do you look at the system first?
Yes, always. We diagnose before we treat: the survey tells us what the system needs and how to reach it, and the quote is based on that.
What a clean won’t put right
Fire damper testing can’t fix everything, and we’ll tell you before any work starts. It will not put right:
- Holes around ductwork in fire-resisting walls
- Ductwork crossing a fire wall with no damper fitted
- Signing off a building’s overall fire safety
Not sure which it is? You can call us on 0345 646 2711 or email us and we will tell you honestly before you book.
Parts of the system we cover
- Motorised smoke dampers
- Riser dampers
- Offices and schools
- Fusible link fire dampers
- Hospitals and care homes
- Wall and floor dampers
Aftercare tips
A little care between visits keeps the system in better shape. We recommend:
- Book the next test before the year runs out
- Fix water leaks in plant rooms and risers promptly
- Warn anyone working in ceiling voids about the dampers
- Don’t let hatches get painted shut or boarded over
When we finish, we send a report covering every damper on the visit, with its location and its result. File it with your fire safety log so it’s to hand for assessors and insurers.
Good access is half the battle. Where there’s no hatch, an access panel makes testing possible before the next test.
Combe buildings and fire safety
Fire safety in Combe falls to Oxfordshire Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Site managers at schools such as Combe CofE Primary School typically find the summer break the easiest time for ceiling work like damper testing. For buildings around Combe station with ducted ventilation, any fire dampers need an annual test at least. Blenheim Palace, about 1.9 miles east, is one of the historic houses near Combe, and older buildings converted to new uses often have ventilation added later.
Combe is about 5 miles north-east of Witney, in Oxfordshire. From the centre of Combe to the outskirts, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. Our Oxfordshire coverage runs to 443 places, Combe among them. Our Oxford page covers sites nearby (10 miles or so).
We cover every part of the OX29 postcode area for fire damper testing and the streets around it. That includes premises on Square Firs, Chatterpie Lane and Orchard Close and nearby roads. Close by, we work in East End (1 mile south-west), Stonesfield (1 mile north-west), Freeland (2 miles south), North Leigh (2 miles south-west) and Fawler (3 miles west). Within a short drive, we also cover Oxford (10 miles south-east), Banbury (15 miles north), Bicester (11 miles east), Abingdon-on-Thames (13 miles south-east), Witney (5 miles south-west) and Carterton (10 miles south-west).
What’s near Combe
Locally, jobs take us to businesses close to The Cock Inn and the streets around them. The closest station to Combe is Combe station, roughly 0.8 miles south-east. A little further out are Morris Motors Museum (1.8 miles south-east). Not far away are Blenheim Farm.
What happens if it’s left?
If a damper can’t close, the wall it sits in has a hole in it during a fire. The rest of the compartment can be built perfectly and still be bypassed by the duct. Testing now is how you find out before it matters. In a place like Combe, ductwork and fans are easy to forget until something goes wrong.
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
Why us?
- Out-of-hours work and a 24/7 emergency line
- We diagnose before we treat
- CHAS and SafeContractor accredited, with ISO 9001
- Fixed quotes, typically within one working day
How we price fire damper testing
Sites vary more than people expect. The main factors:
- The scale of the work
- How many systems or sites are involved
- Whether we need access equipment or extra panels
- Site requirements such as sign-in and permits
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. The price is fixed before we start.
What we need to know
There’s no need for technical detail. It helps if you can send:
- Any access panels or hatches you can see
- Where the site is and what kind of site it is
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The paperwork from the last visit, if you have it
For fire damper testing in Combe, call 0345 646 2711 or use the quote form. Let us know the site type and the opening hours, and send pictures or your last report if you can. We typically send a fixed quote within one working day.
How it works
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. Most of the time goes on the work itself, which takes anything from a couple of hours for a handful of dampers to a full day for a large building. A few photos of the system help us make the most of a visit to a place like Combe.
- First we check the schedule and the last set of results.
- We locate every damper and note any we can’t reach.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Passes are reset and any failures recorded with the reason.
- We report the results and offer remedials on failed dampers.
Getting ready for the visit
- Tell us the best time to work, such as after service or at a weekend
- Mention any locked doors, roof access or ceiling voids
- Name a contact who can let us in at the agreed time
How to get a quote
We don’t publish a price list, because every site is different. We look at your system first, from pictures or on a visit, and then give you a fixed quote. To start, phone us on 0345 646 2711 or email us.
Advice
What your team can do, and what needs us
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, which is where we come in.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Part by part
Ceiling voids and risers
Many dampers sit above suspended ceilings. Ceiling tiles are lifted for access and replaced afterwards.
Offices and retail
Multi-let buildings may have dampers inside tenant areas. Access to each area is planned with whoever manages the building.