West Sussex · Fire damper testing
Fire damper inspection in Middleton-on-Sea
Specialist fire damper testing for Middleton-on-Sea: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Gaps in the fire damper test log
- Dampers that stick or will not close fully
- Dampers that cannot be reached without an access panel
Fire damper testing in Middleton-on-Sea, done properly
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and checking that each blade moves fully and returns. Typical jobs include fire dampers with no recent test record and smoke dampers that need testing through their controls, on fusible link fire dampers, hospitals and care homes and offices and schools.
Where there are care homes, schools or hotels around a place like Middleton-on-Sea, their dampers are often in the ductwork serving kitchens, plant rooms and corridors. We plan the work around the people using the building.
Good records are part of the job. Each visit is written up with photos, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Location
- Middleton-on-Sea (PO22, BN18)
- Region
- West Sussex
- Paperwork
- Report and pictures after the visit
- Quotes
- A fixed price before any work starts
- Hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
When it’s something else
To be straight with you, some problems need a different fix:
- Dampers that were never installed where they’re needed
- Fire risk assessments, which need a fire risk assessor
- Control wiring problems outside the damper itself
If you’re not sure, just call 0345 646 2711 or send us an email and we’ll give you a straight answer before you book.
Where we work
- Hospitals and care homes
- Fusible link fire dampers
- Motorised smoke dampers
- Wall and floor dampers
- Offices and schools
- Riser dampers
How we price fire damper testing
The quote reflects the site in front of us. We consider:
- Where the site is and how we reach it
- The scale of the work
- Working hours and out-of-hours timing
- One-off work versus a regular cycle
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at, and you’ll get one fixed quote.
Asking for a quote
To speed up the quote, send us:
- The roof, plant room or outside wall the system runs to
- The site address and the type of premises
- Your last certificate, test record or report
- Detail shots of panels, filters and grilles
For fire damper testing in Middleton-on-Sea, phone us on 0345 646 2711 or drop us a line. Let us know the site type and the opening hours, and send pictures or your last report if you can. We typically send a fixed quote within one working day.
The process
Protection comes first: floors, worktops and anything near the work are covered. Then we make the system safe and start. The work on site takes a morning or an afternoon for a small number of dampers, longer where there are many, and we clear up before we go. A site near Middleton-on-Sea normally has room to park, so the questions are about access to the system and your hours.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- We reset every damper that passes and check it’s left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Have your last certificate or report to hand
- Mention any sign-in, permit or induction we need
- Tell us the best time to work, such as after service or at a weekend
How to get a quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before we start.
Related advice
Common problems we fix in Middleton-on-Sea
Rust is a frequent reason a damper won’t close. Water leaks, condensation and damp plant areas attack the casing, blade and spring, and the damper can seize quietly where no one sees it.
Clients normally contact us after spotting one of these:
- Damper actions from a fire risk assessment
- Motorised smoke dampers due for testing
- Dampers that can’t be reached without an access panel
- Rusted damper blades and springs
For schools like Bishop Tufnell CofE Primary School, damper testing is easiest in the holidays, when corridors and ceilings are clear.
What your quote should include
- Proof of accreditation you can verify
- Whether the figure could change on the day
- What hours they’ll be on site
- If they look at the system before pricing
Places near Middleton-on-Sea
Other services in Middleton-on-Sea
Common questions in Middleton-on-Sea
Do you work overnight in Middleton-on-Sea?
Yes. We work evenings, overnight and at weekends. Your customers, staff or residents in Middleton-on-Sea needn’t be disturbed. Let us know the hours you’re closed and we’ll book within them.
Can sea air affect fire damper testing in Middleton-on-Sea?
It can. Middleton-on-Sea is within about 1 mile of the coast, and salt air speeds up corrosion. If corrosion is stopping a blade, the report says so and remedial work can be quoted.
Do you cover Middleton-on-Sea?
Yes. Middleton-on-Sea is part of the area we cover, as part of our area across London and the South East.
Who is responsible for fire safety on the premises?
Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: often the employer, owner or occupier. Landlords, facilities managers and managing agents can also hold responsibility.
Do you offer emergency callouts?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we’ll advise on what to do next.
What’s TR19?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Do you look at the system first?
Yes, always. We diagnose before we treat: the survey tells us what the system needs and how to reach it, and the quote is based on that.
What does fire damper testing cost?
The cost depends on the size of the system, its condition, access and timing. Ask us for a fixed quote, normally ready within one working day.
Staff cleaning versus specialist work
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
Between visits
Results last longer with the right care. Here’s what we suggest:
- Keep the damper register up to date after any building work
- Close off damper faults promptly
- Fix water leaks in plant rooms and risers promptly
- Book the next test before the year runs out
Share the results with your fire risk assessor so their assessment matches what was found. Faults on the report are worth closing off quickly.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
Different parts, different methods
Smoke dampers
A smoke damper is opened and closed by a motor, not a link. We test them through their controls to confirm the blade moves all the way.
Fusible link fire dampers
Spring-operated fire dampers need testing at least once a year. A weak spring or a sticking blade shows up when the damper is dropped.
Middleton-on-Sea buildings and fire safety
The coast is only about 1 mile from Middleton-on-Sea. Dampers close to louvres and air intakes can corrode in sea air, and a corroded blade may not drop. Food Standards Agency records list about 5 schools, colleges and universities and about 4 caring premises (care homes, nurseries and hospitals) registered as food businesses in and around Middleton-on-Sea, up to about a mile and a half out. Schools, care settings and hotels are the kind of buildings where fire dampers are commonly found. For Middleton-on-Sea, the closest hospital is Bognor Regis War Memorial Hospital, roughly 2.4 miles west. Where patients or residents may need help to leave a building, working dampers matter all the more.
The nearest hospital, Bognor Regis War Memorial Hospital, is about 2.4 miles west; healthcare buildings like it are a reminder that dampers protect people who can’t move quickly.
Middleton-on-Sea is about 3 miles east of Bognor Regis, in West Sussex. Sites in Middleton-on-Sea get the same service as everywhere we cover: diagnosis first, a fixed price, out-of-hours working where necessary and a written report with photos. Across West Sussex, we cover 371 places, and Middleton-on-Sea is one of them. Our Portsmouth page covers sites nearby (20 miles or so).
Fire damper testing in PO22 and BN18 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Sea Lane, Elmer Road and Yapton Road or anywhere close by, our technicians can take on the work. If your site is just outside Middleton-on-Sea, we cover Elmer (1 mile east), Bilsham (1 mile north), Flansham (1 mile north-west), Felpham (2 miles west) and Yapton (2 miles north). Within a short drive, we also cover Worthing (10 miles east), Bognor Regis (3 miles west), Chichester (8 miles north-west), Selsey (8 miles south-west), Littlehampton (4 miles east) and Lancing (13 miles east).
Around Middleton-on-Sea
Locally, jobs take us to businesses close to Felpham Community College and the streets around them. Middleton-on-Sea’s nearest station is Bognor Regis station, roughly 2.5 miles west. Nearby you’ll also find Bognor Regis Museum (2.7 miles west) and Tote Copse Castle (4.2 miles north-west).