West Sussex · Fire damper testing
Fire and smoke damper testing in Flansham
Fire damper testing in Flansham from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Dampers that stick or will not close fully
- Dampers clogged with dust or grease
- Fire damper items raised by an assessor
Flansham buildings and fire safety
Flansham is within about 2 miles of the coast. Near the sea, we look closely for rust on dampers serving intakes and louvres. Food Standards Agency records list about 9 schools, colleges and universities and about 5 care, childcare and hospital premises registered as food businesses across Flansham and its immediate surroundings (about a mile and a half). Larger buildings like these are often divided into fire compartments, with dampers where ducts pass between them. Flansham sits within the area of West Sussex Fire and Rescue Service. Its fire safety officers enforce the Fire Safety Order in most non-domestic buildings, and that covers fire safety systems such as dampers.
Site managers at schools such as Bishop Tufnell CofE Primary School typically find the summer break the easiest time for ceiling work like damper testing.
Flansham is about 2 miles north-east of Bognor Regis, in West Sussex. Across the PO22 area, we cover fire damper testing for commercial sites. Our area takes in 371 places across West Sussex, large and small. For sites nearby, see our Portsmouth page (19 miles or so).
Every address in PO22 is within our area for fire damper testing, from the main roads to the quietest streets. Neighbouring places we cover for fire damper testing include Bilsham (1 mile east), Lidsey (2 miles north-west), Shripney (2 miles west), Yapton (2 miles north-east) and Barnham (2 miles north). Larger places within reach include Worthing (11 miles east), Chichester (7 miles west), Selsey (8 miles south-west), Littlehampton (5 miles east), Lancing (14 miles east) and Emsworth (13 miles west).
What’s near Flansham
Around Flansham, our work takes us to kitchens and buildings near Felpham Community College and The Brooks Local Nature Reserve, among other places. For rail, the closest station is Barnham station, roughly 1.9 miles north of the centre. A little further out are Tote Copse Castle (3.1 miles north-west) and Bognor Regis Museum (2.3 miles south-west).
Fire damper testing in Flansham, done properly
Not every damper relies on heat. A smoke damper is driven by a motor and responds to signals from its controls, so testing means running them through their controls and checking that each blade moves fully and returns. Common call-outs are for smoke dampers with no recent test and dampers that stick or won’t close fully, across motorised smoke dampers, fusible link fire dampers and riser dampers.
In a village or hamlet like Flansham, there may be only a few buildings with fire dampers. Each damper still needs testing at least once a year.
Each visit ends with a written report and pictures, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Flansham (PO22)
- Wider area
- West Sussex
- Records
- Report and photos after the visit
- Quote
- A fixed quote up front
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
Towns and villages near Flansham
Also in Flansham
Do you need fire damper testing in Flansham?
Other trades work around dampers all the time. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
These are the problems we see most often:
- Rusted damper blades and springs
- Dampers hidden with no access panel or hatch
- Buildings with no damper register
- Fire dampers with no recent test record
If you manage a care home or clinic near Flansham, the testing that a hospital like Bognor Regis War Memorial Hospital (about 1.7 miles south-west) relies on applies to your dampers too.
Questions to ask before you book
- Which accreditations they hold, and whether you can check them
- Exactly which parts of the system are covered
- What records you’ll receive afterwards
- Whether VAT is included
Fixed quotes for fire damper testing in Flansham
You’ll get a fixed price before any work starts. It’s based on:
- Where the site is and how we reach it
- The condition we find in the survey
- The number of sites or systems
- Any permits to work or inductions
You will not find a price list here, because each job is priced on what it involves. For a fixed quote, give us a ring on 0345 646 2711 or send us an email, and we’ll talk you through it.
What to send for a quote
Many jobs can be priced from pictures and some basics. Send what you can of the following:
- Your opening hours and when the area is out of use
- A few general shots of the system
- The paperwork from the last visit, if you have it
- Any access panels or hatches you can see
To get a fixed quote, call 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. We usually come back within one working day.
What staff can safely do
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, it’s best reported rather than tackled in-house. We can diagnose it and quote.
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
What the work involves, part by part
Smoke dampers
Because they’re linked to controls, smoke damper tests can need some coordination. We plan that with you before the visit.
Ceiling voids and risers
Ceiling voids are where lots of dampers end up. Ceiling tiles are lifted for access and replaced afterwards.
Keeping the system healthy
Aftercare is simple, and it makes the next visit easier:
- Warn anyone working in ceiling voids about the dampers
- Diary the annual test well ahead
- Add new dampers to the register as they’re fitted
- Don’t let hatches get painted shut or boarded over
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s to hand for assessors and insurers.
Make sure every damper can be reached. If a damper has no access panel, have one fitted ahead of the next visit.
Flansham: your questions answered
Do you work at weekends in Flansham?
Yes, evening, overnight and weekend work is normal for us. It means the site in Flansham keeps running as normal. Your opening times are the first thing we ask for.
Who is the fire and rescue service for Flansham?
West Sussex Fire and Rescue Service is the fire and rescue service for Flansham. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
How much does fire damper testing cost?
The cost depends on the size of the system, its condition, access and timing. Call for a fixed quote and we will usually reply within one working day.
Do we lose a day’s trading?
Not usually. We need the work area to ourselves while we are on site, so the visit goes in a quiet slot.
Can you come out in an emergency?
Yes. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.
Can you quote from photos?
In many cases, yes. With good photos, the site type and your last report, we can price many jobs. Where we can’t see enough, we arrange a survey.
How do you protect the area?
Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
Who is the responsible person?
The law calls them the responsible person. It’s normally the employer, or whoever controls the building, and in shared buildings more than one person can have duties. If you’re not sure, check your lease and fire risk assessment.
Why deal with it now?
An untested damper is an unknown. A test gives you a clear answer, and we can offer remedials for any that fail, and that is something you can plan around. In a small place like Flansham, a system that fails can take a site out of use.
The price reflects the work, not guesswork. That is why every job is surveyed first, and why the quote is fixed before we start.
Why us?
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Evenings, overnight and weekends, plus 24/7 emergency callout
- A fixed price before any work starts
- We diagnose before we treat
Read what affects the cost and our accreditations and certificates.
How it works
Your staff do not need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Afterwards, the area is left tidy and the written report follows. If you can send photos, we can arrive in Flansham knowing what to expect.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- Each one that passes is reset, ready to work.
- You get a report listing each damper, its result and any remedials needed.
Before we arrive
- Clear the space around the work
- Mention any sign-in, permit or induction we need
- Mention any parking or loading restrictions
Ask for a quote
We do not publish a price list, because no two systems are the same. We look at your system first, from pictures or on a visit, and then send you a fixed quote. To get going, ring 0345 646 2711, or send details by email.