Hampshire · Fire damper testing
Medstead fire damper testing
Need fire damper testing in Medstead? We survey first, give you a fixed quote and work around your opening hours, then sign off with a report and photos.
- Damper actions from a fire risk assessment
- Dampers affected by leaks or condensation
- Smoke dampers that need testing through their controls
How the visit works
A visit follows the same order every time: protect the area, make the system safe, carry out the fire damper testing, clear away and leave you the report. On site, the work takes from an hour or two in a small building to several visits on a large estate. Your opening hours decide when we come to Medstead, not ours.
- We plan access and timing with you first, including any out-of-hours work.
- We open up ceilings and hatches and take off each access panel.
- We release each blade and check it shuts all the way.
- We reset it and record any dirt, corrosion or damage.
- Panels and tiles go back, and the results are written up.
Preparing for the visit
- Agree a time when the area can be out of use
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
- Name a contact who can let us in at the agreed time
How to get a quote
We don’t publish a price list, because every site is different. Instead, we look at your site first, from pictures or a survey, and then give you a fixed quote. To start, phone us on 0345 646 2711, or send details by email.
Advice
About our fire damper testing in Medstead
Testing finds the dampers that will not close. Where a blade sticks, a link is damaged or corrosion has set in, we note it and can quote to repair or replace the damper rather than leaving you with a problem and no fix. Common call-outs are for dampers overdue for their annual drop test and smoke dampers with no recent test, on offices and schools, wall and floor dampers and fusible link fire dampers.
A building in a smaller place like Medstead might have only a few dampers, but each one still needs drop testing at least once a year, with the result recorded.
The sign-off is always in writing: a dated report with pictures of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Where
- Medstead (GU34)
- Region
- Hampshire
- Records
- Report and photos after the visit
- Quote
- A fixed quote up front
- Hours
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Landlords, agents and facilities managers
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements and we will come back with a fixed quote.
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
Medstead: your questions answered
Which fire service covers Medstead?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Medstead. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Do you work in villages like Medstead?
Yes, Medstead is part of our area, however small the site. A survey first, from pictures or a visit, means we arrive with the right kit.
How do you keep the site clean during the work?
Protection goes down first: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Do you survey before quoting?
Yes. Photos often do the job, and larger or hidden systems get a visit.
How do you deal with dampers that cannot be reached?
It’s noted as inaccessible rather than skipped. Once there’s a panel or a way through the ceiling, it can be tested.
Which kinds of sites do you work on?
Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
How long does fire damper testing take?
It takes from an hour or two in a small building to several visits on a large estate. Access is the biggest factor, and we will give you an idea when we quote.
Part by part
Fusible link fire dampers
The link has to be in good order for the damper to work. We check its condition during the test and any problems go on the report.
Ceiling voids and risers
Where ductwork runs up through a building, there are often dampers at every floor. Testing goes floor by floor so nothing is missed.
In-house cleaning or a specialist?
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, next to our reports.
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Also near Medstead
What else we do in Medstead
What fire damper testing cannot fix
An honest diagnosis matters more to us than a booking, so here’s what this work can’t put right:
- Missing dampers that a designer needs to specify
- Fire alarm or control system faults behind a smoke damper
- Signing off a building’s overall fire safety
If you’re not sure, just ring 0345 646 2711 or send us an email and we will give you a straight answer.
Where we work
- Hospitals and care homes
- Offices and schools
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
Between visits
So the system stays in good health:
- Update the register when ductwork changes
- Keep cables and fixings away from damper blades
- Store test records alongside the fire risk assessment
- Fix water leaks in plant rooms and risers promptly
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. File it with your fire safety log so it’s to hand for assessors and insurers.
Water is a damper’s enemy, so fix leaks and condensation near them promptly. Rusted parts are one of the main reasons dampers fail to close.
Why it’s worth doing now in Medstead
If a damper can’t close, the wall it sits in has a hole in it during a fire. Everything else about the compartment can be right and the duct still lets it down. It’s far better to find that out on a test than in a fire. Even a site near Medstead that is only busy part of the week needs its system checked on a schedule.
What you pay depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before work begins, so there are no surprises.
Why book with us
- Survey first, then a fixed quote
- A written report with pictures after every visit
- CHAS, SafeContractor and ISO 9001
- Fixed quotes, typically within one working day
Read what affects the cost and our accreditations.
Fire damper testing around Medstead
At about 49 miles from central London, Medstead sits well inside the area we cover. We work evenings, overnight and at weekends, so the visit fits around the site. Hampshire and Isle of Wight Fire and Rescue Service covers Medstead. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
Hospitals such as Alton Community Hospital, about 3.1 miles north-east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Medstead, the same annual testing applies. Site managers at schools such as Medstead Church of England Primary School usually find the summer break the easiest time for ceiling work like damper testing. Bentworth Hall, about 2.1 miles north, is one of the historic houses near Medstead, and older buildings converted to new uses often have ventilation added later.
Medstead is about 4 miles south-west of Alton, in Hampshire. We provide fire damper testing for businesses, landlords and public buildings in Medstead and the rest of Hampshire. Our area takes in 683 places across Hampshire, from busy centres to quieter spots. Southampton is in our area too, about 20 miles from Medstead.
Work in GU34 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on High Street, Five Ash Road and Stoney Lane or a nearby road, our technicians can take on the work. If your site is just outside Medstead, we cover Four Marks (1 mile south), South Town (1 mile north-west), Soldridge (1 mile south-west), New Copse (1 mile north) and Hattingley (2 miles north-west). We also work in nearby towns such as Basingstoke (10 miles north), Winchester (12 miles west), Fleet (14 miles north-east), Horndean (15 miles south), Alton (4 miles north-east) and Petersfield (9 miles south-east).
Landmarks near Medstead
Medstead’s nearest station is Alton station, about 4.4 miles north-east. Nearby you’ll also find Barton Castle (3 miles north-west) and Alton Community Hospital (3.1 miles north-east). For a walk, there’s Red Hill.