East Sussex · Fire damper testing
Fire damper testing in Hollingrove, East Sussex
Fire damper testing across Hollingrove and nearby, booked around your opening hours and signed off in writing with pictures.
- Blades that jam part-way when released
- Rusted damper blades and springs
- Dampers hidden with no access panel or hatch
How we handle fire damper testing in Hollingrove
Each damper we test gets a location, a result and a note of its condition. Passes are reset and left ready to work, and any that fail are listed with the reason. That record belongs with the building’s fire safety paperwork. The work covers hospitals and care homes, fusible link fire dampers and riser dampers, and people most often call us about dampers overdue for their annual drop test and dampers affected by leaks or condensation.
Somewhere as small as Hollingrove, fire dampers are typically found in a school, a care home, a hotel or a converted building, wherever there is one. Wherever there are dampers, each one needs testing at least annually.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Place
- Hollingrove (TN32)
- Region
- East Sussex
- Records
- Photo report after every visit
- Quotes
- A fixed quote up front
- When we work
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Multi-site and managed buildings
If you look after several sites, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
Different parts, different methods
Fusible link fire dampers
The link has to be in good order for the damper to work. We check its condition during the test and any problems go on the report.
Schools, hospitals and care homes
In hospitals and care homes, people are there day and night. We plan the order of work with the site team to keep disruption to a minimum.
Common questions in Hollingrove
Do you work in villages like Hollingrove?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
Which fire and rescue service is responsible for Hollingrove?
That’s East Sussex Fire and Rescue Service. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Can you test motorised smoke dampers?
Yes, alongside fire damper drop testing. Smoke and fire dampers are reported together, so you have one record.
What if a fire damper will not close?
The fault is recorded and explained in the report. A repair or a replacement can follow as a remedial job and test it again.
Do you have a 24/7 line?
Yes. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we will advise on what to do next.
Will we get a certificate for the dampers?
We test, record and report, rather than certify dampers to a standard. For each damper it shows the result and anything that needs putting right.
Can you price the work without visiting?
Yes, where the pictures show enough. Otherwise, we book a survey at a time that suits the site, and the quote follows that.
Are you fully insured?
Yes. We are fully insured, and we can share the details when you need them.
In-house cleaning or a specialist?
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We will take a look and send you a fixed quote.
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that is where we come in.
What fire damper testing looks like in Hollingrove
Ticehurst House Hospital is the nearest hospital, about 6 miles north of Hollingrove. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Hollingrove is covered by East Sussex Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order.
Historic houses near Hollingrove, with Bateman's about 2.2 miles north-west, are a reminder that older buildings can hold dampers in unexpected places. Hospitals such as Ticehurst House Hospital, about 6 miles north, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Hollingrove, the same annual testing applies.
Hollingrove is about 8 miles north of Bexhill-on-Sea, in East Sussex. Hollingrove gets the same approach as every site we work on: diagnosis first, a fixed price, out-of-hours working where needed and a written report with pictures. Our East Sussex coverage runs to 289 places, and Hollingrove is one of them. Our Maidstone page covers sites nearby, about 22 miles away.
All of TN32 is within our area for fire damper testing, from busy streets to back roads. Whether your site is on Hollingrove Road and Kent Lane or a nearby road, our technicians can take on the work. Neighbouring places we cover for fire damper testing include Brightling (1 mile west), Oxley's Green (1 mile north), Twelve Oaks (1 mile south-west), Netherfield (2 miles south-east) and Penhurst (3 miles south). Further out, we also cover Eastbourne (13 miles south-west), Hastings (9 miles south-east), Bexhill-on-Sea (8 miles south), Hailsham (10 miles south-west), Crowborough (12 miles north-west) and St Leonards (10 miles south-east).
Local landmarks in Hollingrove
The nearest railway station is Robertsbridge station, roughly 3.1 miles north-east. Other landmarks nearby include Old Castle (2.6 miles south-west) and Ticehurst House Hospital (6 miles north). For a walk, there’s Senlac Hill.
What fire damper testing can’t fix
It’s worth knowing the limits before booking:
- Fire risk assessments, which need a fire risk assessor
- Holes around ductwork in fire-resisting walls
- Missing dampers that a designer needs to specify
If in doubt, ring 0345 646 2711, or send details by email and we’ll say what we think.
Where we work
- Motorised smoke dampers
- Riser dampers
- Offices and schools
- Hospitals and care homes
- Wall and floor dampers
- Fusible link fire dampers
Towns and villages near Hollingrove
More services for Hollingrove
What affects the quote in Hollingrove
Before we fix a price, we need to know a few things. We check:
- One-off work versus a regular cycle
- Any permits to work or inductions
- Travel, parking and unloading
- The times the site is available
Several systems or sites on one quote often makes better use of the time. Mention every system or site you need covered and we’ll price it together.
What to send for a quote
Many jobs can be priced from pictures and some basics. Send what you can of the following:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Detail shots of panels, filters and grilles
- Your last certificate, test record or report
- Wide pictures of the system and the area around it
Want a quote for fire damper testing? Please give us a ring on 0345 646 2711, or send details by email with a few details about the site. We will explain what we’d do and send a fixed quote before anything is booked.
Looking after it afterwards
So the system stays in good health:
- Keep cables and fixings away from damper blades
- File every damper report where your assessor can find it
- Brief other trades about dampers in ceilings and risers
- Get remedials done soon after a failed test
Make sure trades working in ceilings and risers know where the dampers sit, and that they mustn’t tie, wedge or obstruct them. Anything they disturb should be checked again.
Deal with leaks and condensation near dampers quickly. Rusted parts are one of the main reasons dampers fail to close.
How the visit works
We turn up at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool before work begins, and the area around the work is covered and protected. The work itself takes a couple of hours for a few dampers, and a day or more across a big site. A few photos of the system help us make the most of a visit to a place like Hollingrove.
- Before the visit, we agree access, timings and any areas with restrictions.
- Ceiling tiles and hatches are opened and each damper’s access panel removed.
- We release each blade and check it shuts all the way.
- The damper is reset and its condition noted.
- We close everything up and send the results in a report.
Before we arrive
- Tell us the best time to work, such as after service or at a weekend
- Find the previous report, if there is one
- Name a contact who can let us in at the agreed time
Ask for a quote
Every quote begins with a look at the system, from your pictures and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before work begins.