Surrey · Fire damper testing
Fire damper testing in Hale, Surrey
For fire damper testing in Hale, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Smoke dampers that need testing through their controls
- Blades that jam part-way when released
- Dampers overdue for their annual drop test
Multi-site and managed buildings
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we will come back with a fixed quote.
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
About our fire damper testing in Hale
Some dampers haven’t been tested since the day they went in. Ceilings get lowered, hatches get boarded over and paperwork goes astray. We find what we can, test what we can reach and list anything we cannot get to, so you can see exactly what still needs access. The work covers riser dampers, fusible link fire dampers and offices and schools, and common reasons people get in touch are smoke dampers with no recent test and dampers that can’t be reached without an access panel.
For a building in or near Hale, the visit is planned ahead, with access agreed in advance, and every damper is drop tested, reset and recorded, the same as anywhere.
Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Place
- Hale (GU9)
- Region
- Surrey
- Reporting
- Photo report after each visit
- Quote
- A fixed price before work begins
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
Looking after it afterwards
Think of this as the after-treatment advice, short and simple:
- Keep the damper register up to date after any building work
- Keep an eye out for damp around dampers
- Never wedge or tie a damper open
- Tell contractors where dampers are before they start work
Any damper that failed is listed with the reason, along with an offer to repair or replace them. After a repair, we retest the damper and update the record.
Keeping to at least annual testing stops small faults turning into failed dampers. A blade that’s just starting to stick is easier to deal with than a seized one.
How the visit works
Your staff do not need to do much on the day. A contact on site lets us in at the agreed time and points us to the system, and the rest is down to us. Afterwards, the area is left tidy and the written report follows. In a small place like Hale, the journey is planned ahead and the visit arranged around the site’s hours.
- First we look at any damper register, drawings or earlier test reports.
- Dampers are located one by one and reached through their access panels.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- We reset every damper that passes and check it’s left open.
- We report on every damper, with faults and suggested remedials set out.
How to prepare
- Clear the space around the work
- Find the previous report, if there is one
- Let us know when the site is closed or quiet
Getting a quote
The quickest way to a quote is to send photos: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
Related advice
What your team can do, and what needs us
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, next to our reports.
Hale buildings and fire safety
There are about 12 schools, colleges and universities, about 16 caring premises (care homes, nurseries and hospitals) and about 3 hotels and guest houses on the FSA’s food hygiene register within 1.5 miles or so of the middle of Hale. If any of them has ducted ventilation, its dampers need an annual drop test at least. The nearest hospital to Hale is Fleet Community Hospital, about 4.8 miles north-west. Hospitals are a good example of a building with fire dampers across many floors and departments. Hale sits within the area of Surrey Fire and Rescue Service. Under the Fire Safety Order, the responsible person has to keep fire safety systems, dampers included, in working order, and the fire authority enforces that in most non-domestic premises.
Farnham Castle, about 1.1 miles south-west, is one of the historic houses near Hale, and older buildings converted to new uses often have ventilation added later. School buildings such as Farnham Heath End School are normally tested in the holidays, wherever they have dampers.
Hale is about 1 mile north of Farnham, in Surrey. If you need fire damper testing in Hale, please call us on 0345 646 2711, or email photos for a fixed quote. We work across South East England and London, Hale included. Our Surrey coverage runs to 395 places, and Hale is one of them. You can also see our page for Guildford, roughly 9 miles from Hale.
All of GU9 is covered for fire damper testing, from the main roads to the quietest streets. Whether your site is on Fairview Gardens, Farnborough Road and White Cottage Close or anywhere close by, we can help. Nearby, we also carry out fire damper testing in Heath End (1 mile north), Weybourne (1 mile north-east), Upper Hale (1 mile north-west), Badshot Lea (1 mile east) and Farnham (1 mile south). We also work in nearby towns such as Guildford (9 miles east), Woking (11 miles north-east), Camberley (8 miles north), Frimley (6 miles north), Haslemere (10 miles south) and Cranleigh (15 miles south-east).
Around Hale
Around Hale, our work takes us to kitchens and buildings near Weybourne LNR, William Cobbett Primary School and The Six Bells pub. Hale’s nearest station is Farnham station, roughly 1.3 miles south. A little further out are Farnham Castle (1.1 miles south-west) and Museum of Farnham (1.4 miles south-west). The countryside around Hale includes Farnham Park and Aunt's Pool.
When to call us in Hale
Building work often happens right next to dampers. A cable run through the blade path, a knocked link or a wedged blade is enough to stop a damper closing.
Signs it’s time to call us include:
- Smoke dampers with no recent test
- Dampers hidden with no access panel or hatch
- Dampers that stick or will not close fully
- Missing or out-of-date damper records
Healthcare buildings such as Fleet Community Hospital (about 4.8 miles north-west) rely on fire compartments, and the dampers in them need testing at least annually.
What your quote should include
- Whether the quote shows VAT
- Whether the quote is based on a survey or pictures
- If the quote is a fixed price or an estimate
- When they can work, and whether that’s outside your opening hours
Hale questions
Which fire authority looks after Hale?
That’s Surrey Fire and Rescue Service. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Do you test dampers in schools in Hale during the holidays?
Yes. Half-terms and the summer break are the natural time for school work. Food Standards Agency records list about 12 schools, colleges and universities with registered kitchens within about a mile and a half of Hale. Send us your term dates when you call 0345 646 2711, or send details by email, and we will fit the work in.
Can you price the work without visiting?
Yes, if we can see what we need. If not, a site survey comes first, then a fixed quote.
Are you insured?
Yes. We’re fully insured, and we can share the details when you need them.
Do you test dampers in the evening or at weekends?
Yes. We can test in the evening, overnight or at the weekend, which suits offices, retail and schools. In occupied care settings, we agree the order of work with staff.
What do you do with what you remove?
We take it away at the end of the visit. During the work, it’s contained so the area stays clean.
How often does BESA say fire dampers should be tested?
According to BESA guidance, dampers should be tested when they’re installed and then at least once a year. Spring-operated dampers need annual testing as a minimum.
What do you need from me for a quote?
Some pictures and a quick description of the system plus the address and your hours. If we need more, we will ask.
Places near Hale
More services for Hale
Part by part
Schools, hospitals and care homes
Hospitals and care homes stay occupied around the clock. We plan the order of work with the site team so care is not interrupted.
Ceiling voids and risers
Plant rooms and risers can be damp, which leads to corrosion. We note any rust or water damage on the report so the cause can be tackled.
Fixed quotes for fire damper testing in Hale
Your quote is based on your site. We take into account:
- What state the system is in
- Whether it’s a one-off visit or part of a schedule
- How big the system is
- How many systems or sites are involved
Combining work into one visit or one programme often makes better use of the time. Tell us about everything you’d like looked at and we will price it together.
Helping us quote
When you contact us, it’s useful to have:
- Any access panels or hatches you can see
- Any previous report or certificate
- When the site is open and when it’s quiet
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Here’s what helps us quote: the address, the type of site and when it’s open, a few photos and the last certificate or report, if there is one. Then give us a ring on 0345 646 2711 or email us.