East Sussex · Fire damper testing
Fire damper inspection in Glynde
For fire damper testing in Glynde, one call is all it takes: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Blades that jam part-way when released
- Rusted damper blades and springs
- Smoke dampers with no recent test
What happens on the day
We start by comparing what we find with the survey or your photos. Anything unexpected is raised with you before we go further. From there, it takes a couple of hours for a few dampers, and a day or more across a big site. For a village or hamlet like Glynde, tell us about narrow lanes, gates and parking when you book.
- We start with whatever records exist: registers, drawings or old reports.
- Each damper is located and reached through its access panel.
- Fire dampers are drop tested and smoke dampers are run through their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Getting ready for the visit
- Have your last certificate or report to hand
- Move anything stored near the system
- Let us know when the site is closed or quiet
Getting a quote
We do not publish a price list, because no two systems are the same. We look at your system first, from pictures or on a visit, and then give you a fixed quote. To start, call us on 0345 646 2711 or send us an email.
Read more
Fire damper testing in Glynde, done properly
BESA guidance is that fire dampers should be tested by a competent person when they’re installed and at least annually after that. For spring-operated types, annual testing is the minimum. We carry out fire damper testing for buildings in Glynde and give you the records to show it’s been done. If you are dealing with fire dampers that haven’t been tested for over a year and dust or grease build-up on damper blades, we can put it right.
Testing in a small place like Glynde is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Where
- Glynde (BN8)
- Region
- East Sussex
- Paperwork
- Written report with photos
- Quote
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
For landlords and multi-site operators
For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so records stay tidy.
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we will come back with a fixed quote.
Signs you need fire damper testing in Glynde
Other trades work around dampers all the time. Cables get run through them, links get knocked and blades get wedged open, and any of those can stop a damper closing.
Common reasons sites call us include:
- Dampers affected by leaks or condensation
- Fire dampers with no recent test record
- Gaps in the fire damper test log
- Dampers clogged with dust or grease
Glynde Place, about 0.1 miles north, is one of the historic houses near Glynde, and older buildings converted to new uses often have ventilation added later.
Questions to ask before you book
- Whether they’re fully insured
- When the next visit should be, and why
- What’s included in the scope, part by part
- When they can work, and whether that’s outside your opening hours
Why it’s worth doing now in Glynde
Leaving damper testing for another year does not make the dampers any more likely to work. The guidance from BESA is at least once a year, and a skipped year leaves a hole in your records as well. Out of sight is the usual reason a rural system goes too long without attention.
One small site or a whole estate, the quote is built the same way: what needs doing, how we get to it and when. The price is fixed before work begins.
Why us?
- Work around your opening hours, with 24/7 emergency cover
- Fixed quotes, usually within one working day
- A single point of contact for sites across the South East and London
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
See what affects the cost and our accreditations and certificates.
What fire damper testing looks like in Glynde
Lewes Victoria Hospital is the nearest hospital, about 3.3 miles west of Glynde. Smaller healthcare sites, from surgeries to care homes, need the same annual damper test as a hospital. Glynde is about 44 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible.
If you look after a building near Glynde station with a fire risk assessment due, a damper test with a full record is worth having first. Healthcare buildings such as Lewes Victoria Hospital (about 3.3 miles west) rely on fire compartments, and the dampers in them need testing at least annually.
Glynde is about 3 miles east of Lewes, in East Sussex. Whether your site is in the middle of Glynde or further out, fire damper testing is available to all kinds of commercial premises, from small sites to large estates. We cover 289 places across East Sussex, large and small. For sites nearby, see our Brighton page, about 9 miles away.
Every address in BN8 is covered for fire damper testing, from busy streets to back roads. Streets in the area include Lacys Hill and Ranscombe Lane, and we cover them all for fire damper testing. We also cover Glyndebourne (1 mile north), Firle (1 mile south-east), Ashton Green (2 miles north), Ringmer (2 miles north) and Cliffe (2 miles west). We also work in nearby towns such as Eastbourne (11 miles south-east), Seaford (6 miles south), Lewes (3 miles west), Hailsham (8 miles east), Crowborough (14 miles north) and Uckfield (7 miles north).
Around Glynde
Locally, jobs take us to businesses close to Ringmer Community College and Sixth Form, Lewes and Laughton Levels and Firle Church of England Primary School. There’s a railway station in Glynde itself: Glynde station. A little further out are Lewes Castle (2.7 miles west) and Museum of Agricultural Bygones (2.4 miles north-east). Green spaces nearby include Cliffe Hill and Southerham Farm.
Your questions about fire damper testing in Glynde
Which fire and rescue service is responsible for Glynde?
Glynde is in the area of East Sussex Fire and Rescue Service. BESA guidance is that every fire damper is tested at least once a year, so an officer or insurer may expect a report less than a year old.
Do you work in villages like Glynde?
Yes, smaller places are covered as well as towns. A survey first, from pictures or a visit, means we arrive with the right kit.
How long will damper testing take?
As a guide, it takes from an hour or two in a small building to several visits on a large estate. The number of dampers and how they’re reached decide the rest.
What happens if you cannot reach some of it?
They’re marked on the report. Often the fix is extra access, such as new panels in ductwork, which we can install.
Who is responsible for fire damper testing?
The Regulatory Reform (Fire Safety) Order 2005 puts it on the responsible person. Testing at least yearly and keeping the reports is how they can show it’s being done.
Do you offer emergency callouts?
Yes. There’s a 24/7 emergency line for anything that cannot wait until a planned visit. Ring any time and tell us what’s happened.
Can you look after several sites?
Yes. Send the list of sites and the work at each and you will get one fixed quote.
Where does the waste go?
We take it away at the end of the visit. During the work, it’s contained to keep the area clean.
In-house cleaning or a specialist?
Away from the kitchen, the in-house job is mainly checking: clear grilles, a log of filter changes and reporting anything odd. Cleaning inside ducts and units is specialist work.
Your own staff can handle the daily basics: wiping canopies, washing grease filters and recording it in a log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Aftercare tips
Aftercare is simple, and it helps at the next visit:
- Keep damper test reports with the fire safety log
- Never wedge or tie a damper open
- Don’t let hatches get painted shut or boarded over
- Tell contractors where dampers are before they start work
Put the next test in the diary within twelve months. The guidance is at least once a year, and booking the same month each year keeps it simple.
Make sure every damper can be reached. Where there’s no hatch, an access panel makes testing possible before the next test.
Also near Glynde
What else we do in Glynde
How the job changes from site to site
Fusible link fire dampers
The common fire damper uses a link that holds the blade open. Heat melts the link and the blade falls shut across the duct. Testing means dropping the blade, checking the full close and resetting it.
Offices and retail
In offices and retail units, dampers tend to be hidden above working areas. We can test in the evening, overnight or at weekends to keep disruption down.