Hampshire · Fire damper testing
Calshot fire damper testing
Fire damper testing for Calshot, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- Dampers affected by leaks or condensation
- Dust or grease build-up on damper blades
- Fire dampers that haven’t been tested for over a year
What affects the quote in Calshot
The quote reflects the site in front of us. We consider:
- What state the system is in
- The scale of the work
- Access, including roofs, risers and ceiling voids
- Parking and loading at the site
No two sites are the same, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all play a part.
What to send for a quote
Many jobs can be priced from photos and some basics. Send what you can of the following:
- Problems your staff have spotted
- A few general shots of the system
- The postcode and the type of business
- When the site is open and when it’s quiet
If you need fire damper testing in Calshot, call 0345 646 2711, or email photos. Let us know the site type and the opening hours, plus pictures or the previous report if they’re to hand. A fixed quote typically follows within one working day.
Fire damper testing for kitchens and businesses in Calshot
We’re often asked to take on annual damper testing by the people who look after buildings in and around Calshot. If there’s a damper register or a set of drawings, share it with us, and we will plan the visit around the building’s hours. We’re often asked to deal with dampers that stick or won’t close fully and dampers clogged with dust or grease, across motorised smoke dampers, fusible link fire dampers and offices and schools.
For a building in or near Calshot, the visit is planned ahead, with access agreed in advance, and the test itself is the same as in any city building.
Every visit ends with a written report and pictures, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Location
- Calshot (SO45)
- Wider area
- Hampshire
- Reporting
- Report and photos after the visit
- Quote
- A fixed quote up front
- Hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Places near Calshot
Also in Calshot
Aftercare tips
Once we have finished, these simple steps help:
- Keep cables and fixings away from damper blades
- Update the register when ductwork changes
- Close off damper faults promptly
- Brief other trades about dampers in ceilings and risers
Any damper that failed is listed with the reason, along with an offer to repair or replace them. After a repair, we retest the damper and update the record.
Clean ductwork means less dust and grease reaching the dampers. Duct cleaning and damper testing can be planned side by side.
Multi-site and managed buildings
Facilities teams in offices, schools and healthcare sites book us too across Hampshire. Work can be phased by floor, building or site around the people who use them.
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we’ll come back with a fixed quote.
Common questions in Calshot
Can you come to Calshot after we close?
Yes. We work evenings, overnight and at weekends. It means the site in Calshot keeps running as normal. When you phone us on 0345 646 2711, or email photos, mention when the site is quiet.
Which fire authority looks after Calshot?
It’s Hampshire and Isle of Wight Fire and Rescue Service, which covers Calshot. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
What paperwork do we get after testing?
After testing, we provide a report covering each damper, with its location, its result and any faults. It belongs in your fire safety log.
How often does BESA say fire dampers should be tested?
BESA guidance is that fire dampers are tested on completion of installation and at least annually after that. For spring-operated dampers, once a year is the minimum.
Which kinds of sites do you work on?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
Do we lose a day’s trading?
Not typically. Booking the work out of hours means the site can carry on as normal. Bigger sites can be done in stages to keep things running.
What should I send you?
Some photos and a quick description of the system plus the address and your hours. We will ask for anything else we need.
Do you have a 24/7 line?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, with the emergency line covering every other hour.
Fire damper testing around Calshot
Calshot lies within about 1 mile of the sea. Corrosion is a known cause of damper failure, and coastal air adds to the risk near intakes and louvres. Coldeast is the nearest hospital, about 4.5 miles north-east of Calshot. Healthcare buildings rely on fire compartments to protect people who can’t easily move, and dampers keep those compartments sealed. Calshot sits within the area of Hampshire and Isle of Wight Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and keeping dampers working is part of the responsible person’s duty.
If you manage a historic building in the area (Osborne House is about 4.9 miles south-east), dampers fitted during conversions can be hard to reach and need recording.
Calshot is about 4 miles north of Cowes, in Hampshire. Sites in Calshot get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Our area takes in 683 places across Hampshire, from busy centres to quieter spots. We also work in Southampton, about 8 miles from Calshot.
Postcode districts we cover here for fire damper testing: SO45. Fire damper testing is available to premises on Bus Drove, Elmfield Lane and Tristan Close and nearby roads. We also cover Hillhead (1 mile south-east), Sprat's Down (1 mile west), Stanswood (1 mile south-west), Stonehills (1 mile north-west) and Ashlett (1 mile north-west). Within a short drive, we also cover Gosport (8 miles east), Havant (15 miles east), Eastleigh (11 miles north), Fareham (6 miles north-east), Horndean (15 miles north-east) and Totton (11 miles north-west).
Near you in Calshot
For rail, the closest station is Hamble station, about 4.1 miles north of the centre. Other landmarks nearby include Calshot Castle (1.1 miles north-east) and Coldeast (4.5 miles north-east). Not far away are Mercury Marshes and Mill Hill.
Different parts, different methods
Smoke dampers
A smoke damper that does not respond to its controls is recorded as a fault, along with what we saw.
Access panels
Where there’s no access panel, we record the damper as not tested and say why. Fitting a panel means it can be tested on the next visit.
What happens on the day
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. Most of the time goes on the work itself, which takes from an hour or two in a small building to several visits on a large estate. Somewhere as small as Calshot, the date and timings are agreed with you well before the day.
- We go through the damper schedule and any previous faults.
- Each damper is found and checked for access.
- Fire dampers are drop tested, and smoke dampers are tested through their controls.
- Dampers that pass are reset, and failures are logged with what we found.
- The report sets out the results, and we can quote to repair or replace failed dampers.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Mention any parking or loading restrictions
- Clear loose items from the work area
Getting a quote
Want a quote for fire damper testing? Please call 0345 646 2711, or send details by email with a few details about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.
Advice
When to call us in Calshot
Over the life of a building, owners, tenants and contractors come and go, and damper records often get lost along the way. With no register, it’s hard to say how many dampers exist, let alone when they were tested.
Any of these means the system needs a check-up:
- Motorised smoke dampers due for testing
- Gaps in the fire damper test log
- Dampers that cannot be reached without an access panel
- Dampers that stick or will not close fully
Hospitals such as Coldeast, about 4.5 miles north-east, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Calshot, the same annual testing applies.
What to look for in a quote
- What hours they’ll be on site
- Whether a survey comes first
- What happens if part of the system can’t be accessed
- What paperwork you get at the end
What a clean won’t put right
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- Gaps in the wall or floor around the damper
- Control wiring problems outside the damper itself
- Ductwork crossing a fire wall with no damper fitted
If in doubt, ring 0345 646 2711, or send details by email and we will say what we think before booking.
What we work on in Calshot
- Motorised smoke dampers
- Hospitals and care homes
- Fusible link fire dampers
- Riser dampers
- Offices and schools
- Wall and floor dampers