Greater London · Fire damper testing
Fire and smoke damper testing in Bermondsey
Looking for fire damper testing in Bermondsey? We survey first, give you a fixed quote and work around your opening hours, finishing with a written report and pictures.
- Fire dampers nobody can get to
- Dust or grease build-up on damper blades
- Smoke dampers that need testing through their controls
How we handle fire damper testing in Bermondsey
Testing finds the dampers that will not close. When one sticks, has a damaged link or is corroded, we report it and offer remedials, so the fault does not just sit on a list. Typical jobs include dampers hidden with no access panel or hatch and smoke dampers that need testing through their controls, across motorised smoke dampers, offices and schools and wall and floor dampers.
In a London area like Bermondsey, testing has to fit around tenants, residents, guests or patients, so we work floor by floor or out of hours. Access to ceiling voids and risers is agreed with the building manager first.
The paperwork matters as much as the work. Each visit is written up with pictures, listing what was done, anything we couldn’t reach and when the next visit is due. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Location
- Bermondsey (SE1, SE16, SE5)
- Wider area
- Greater London
- Records
- Written report with photos
- Quote
- A fixed price before we start
- Hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
What happens on the day
On the day, we arrive at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Equipment that has to be off is switched off and allowed to cool first, and the area around the work is covered and protected. On site, it takes a couple of hours for a few dampers, and a day or more across a big site. Managed blocks in London often need contractors booked in ahead, and we’re happy to deal with the agent directly for a site in Bermondsey.
- First we look at any damper register, drawings or earlier test reports.
- Each damper is located and reached through its access panel.
- Every fire damper is dropped, and every smoke damper is tested through its controls.
- We reset every damper that passes and check it’s left open.
- The results go into a report, with failed dampers and remedials listed.
Getting ready for the visit
- Tell us the best time to work, such as after service or at a weekend
- Let us know about parking and loading
- Dig out any earlier paperwork for the system
How to get a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work so you know the cost before work begins.
Read more
When to call us in Bermondsey
Fusible links and springs don’t last for ever. Damaged or painted links and weak springs mean the blade may stop short, which only shows up when the damper is dropped.
Any of these means the system needs a check-up:
- Smoke dampers with no recent test
- Missing or out-of-date damper records
- Damper actions from a fire risk assessment
- Fire dampers nobody can get to
Guy's Hospital, about 0.7 miles north-west of Bermondsey, is the kind of building where dampers protect every compartment; smaller care sites need the same annual tests.
Comparing quotes
- Whether the work can be done while the site is closed
- Proof of accreditation you can verify
- Whether VAT is included
- Whether the price is fixed
Fixed quotes for fire damper testing in Bermondsey
The price is fixed before any work begins. It’s based on:
- Any permits to work or inductions
- The scale of the work
- When the work can happen, such as evenings, overnight or weekends
- The condition we find in the survey
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we will explain each part.
What to send for a quote
You don’t need the technical terms. It helps if you can send:
- Photos showing the whole system and its surroundings
- Any previous report or certificate
- Your opening hours and when the area is out of use
- The site address and the type of premises
We do not publish a price list, because no two systems are the same. We look at your system first, from pictures or on a visit, and then send you a fixed quote. To get going, phone us on 0345 646 2711 or use the quote form.
What fire damper testing can’t fix
An honest diagnosis matters more to us than a booking, so here’s what this work can’t put right:
- Approving the building’s fire strategy
- Designing the building’s fire compartments
- Fire alarm or control system faults behind a smoke damper
If you are not sure, just ring 0345 646 2711, or send details by email and we’ll give you a straight answer before booking.
What we work on in Bermondsey
- Offices and schools
- Hospitals and care homes
- Wall and floor dampers
- Riser dampers
- Motorised smoke dampers
- Fusible link fire dampers
Your questions about fire damper testing in Bermondsey
Who is the fire and rescue service for Bermondsey?
Bermondsey is in the area of London Fire Brigade. Failed dampers on a report should be followed by a record of the repair, so the file shows the problem was closed out.
Do you do school damper testing in Bermondsey in the summer holidays?
Yes, holiday work suits schools best. Food Standards Agency records list about 108 schools, colleges and universities with registered kitchens within about a mile and a half of Bermondsey. Just phone us on 0345 646 2711 or send us an email with your term dates and we will plan around them.
Who is responsible for fire safety on the premises?
Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: often the employer, owner or occupier. Landlords, facilities managers and managing agents can also hold responsibility.
Can you test motorised smoke dampers?
Yes. Smoke dampers are motorised, so we test them by operating them through their controls. We check every blade moves fully and record the outcome.
What is TR19?
BESA’s ventilation hygiene specification in two main parts: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It is not legislation, but it’s the standard people check against.
What happens to the waste?
It’s contained and taken away. We collect grease, debris and waste water as we go rather than letting it spread.
How long does fire damper testing take?
Expect it to take from an hour or two in a small building to several visits on a large estate. Access is the biggest factor, and we will give you an idea when we quote.
How often should fire dampers be tested?
According to BESA guidance, dampers should be tested when they’re installed and then at least once a year. Spring-operated dampers need annual testing as a minimum.
Bermondsey buildings and fire safety
Food Standards Agency data includes about 108 schools, colleges and universities, about 59 hospitals, care homes and childcare premises and about 48 hotels, B&Bs and guest houses within roughly a mile and a half of the centre of Bermondsey. Many buildings of this kind have ductwork through fire-resisting walls and floors, and the dampers at those points need testing at least annually. London Fire Brigade covers Bermondsey. When a fire safety officer audits a non-domestic building, maintenance of systems like dampers can come up. In a London building, dampers are often spread across floors and risers, and testing is typically planned out of hours.
If you manage a school site such as Boutcher Church of England Primary School, any fire dampers can be tested in the holidays. If you manage a historic building in the area (Mansion House is about 1.3 miles north-west), dampers fitted during conversions can be hard to reach and need recording.
Bermondsey is about 1 mile east of London, in Greater London. We provide fire damper testing for commercial premises of every kind in Bermondsey and the rest of Greater London. Bermondsey is one of 764 places in Greater London where we work for fire damper testing.
Here we cover the SE1, SE16 and SE5 postcode area for fire damper testing. Local streets include Crown Square, Fire Station Square and Layard Square, all of which we cover for fire damper testing. Being close to the A100 and B202, Bermondsey is simple for us to get to for fire damper testing. Neighbouring places we cover for fire damper testing include Walworth (1 mile south-west), London (1 mile west), South Bermondsey (1 mile south-east), Surrey Canal (1 mile south-east) and Surrey Quays (1 mile east). Within a short drive, we also cover City of Westminster (4 miles west), Marylebone (3 miles north-west), Kensington (5 miles west), St Pancras (3 miles north-west), Walthamstow (7 miles north) and Hoxton (3 miles north).
Landmarks near Bermondsey
We work in commercial kitchens and buildings around Asylum for the deaf and dumb, St Mary-at-Hill and Harris Academy Bermondsey. Also close by are Bishopsgate Institute Special Collections and Archives (1.5 miles north), Bermondsey Spa Gardens (within half a mile south) and Simon the Tanner pub (within half a mile west). Bermondsey’s nearest station is London Bridge station, about 0.7 miles north-west. Other landmarks nearby include Fashion and Textile Museum (under half a mile west) and Guy's Hospital (0.7 miles north-west). The countryside around Bermondsey includes St. James's Park Lake and Bellenden Road Nature Garden.
Landlords, agents and facilities managers
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
We work for landlords, managing agents and facilities managers as well as the people running the site. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
How the job changes from site to site
Schools, hospitals and care homes
Buildings where people sleep or need help to leave rely heavily on compartments holding fire back. Annual damper testing is part of keeping that in place.
Smoke dampers
A smoke damper is opened and closed by a motor, not a link. Testing means operating them from the controls to confirm the blade moves all the way.
Leave it or put it right?
Putting testing off doesn’t change whether the dampers will close; it just means you don’t know. BESA guidance is to test at least annually, so a missed year leaves a gap in the record too. It’s better booked as a planned job in Bermondsey than handled as an emergency.
You won’t find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we’ll talk you through it.
Why us?
- Ventilation hygiene specialists since 2009
- A written report with pictures after each visit
- Fixed quotes from a survey or photos
- CHAS, SafeContractor and ISO 9001
Take a look at our cost guide and our accreditations and certificates.