Surrey · Fire damper testing
Fire damper inspection in Anglefield Corner
Fire damper testing across Anglefield Corner and nearby, booked around your opening hours and finished with a written report and pictures.
- Corroded dampers in damp risers and plant rooms
- Dampers flagged on a fire risk assessment
- Smoke dampers that need testing through their controls
Common problems we fix in Anglefield Corner
Over time, dust builds up on the blade, the runners and the spring. Where the duct carries grease or cooking vapour, grease coats them too, and either can stop the blade dropping fully.
Keep an eye out for any of the following:
- Dust or grease build-up on damper blades
- Gaps in the fire damper test log
- Corroded dampers in damp risers and plant rooms
- Fire dampers with no recent test record
For buildings in and around Anglefield Corner, every damper is drop tested, reset and recorded.
Comparing quotes
- What’s included in the scope, part by part
- Whether they’re fully insured
- What hours they’ll be on site
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
About our fire damper testing in Anglefield Corner
A drop test is simple in principle: we release the blade, watch it close fully, then reset it. We do this for buildings in Anglefield Corner and across Surrey, keeping a log for each damper so there’s a history to look back on. If you are dealing with fire dampers nobody can get to and smoke dampers with no recent test, we can put it right.
Testing in a small place like Anglefield Corner is planned around the journey and access, and every damper is drop tested, reset and recorded, the same as anywhere.
Accreditations are easy to claim and worth checking. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Place
- Anglefield Corner (RH9)
- Region
- Surrey
- Paperwork
- Photo report after each visit
- Price
- Fixed quote, usually within a working day
- When we work
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Also near Anglefield Corner
Also in Anglefield Corner
For landlords and multi-site operators
Records are where multi-site compliance often slips. Every visit ends with a dated report and photos, ready to show insurers, fire officers or EHOs.
Multi-site operators often want one contractor and one number. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
Questions from Anglefield Corner
Who is the fire and rescue service for Anglefield Corner?
It’s Surrey Fire and Rescue Service, which covers Anglefield Corner. Keep each damper test report with the fire risk assessment and the building’s log book, ready to show.
Can the work in Anglefield Corner be done at night or at weekends?
Yes, nights and weekends are routine for us. It means the site in Anglefield Corner keeps running as normal. Your opening times are the first thing we ask for.
Is TR19 a legal requirement?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How do you deal with dampers that can’t be reached?
We do not leave it off the report; we note it as not reached. Once there’s a panel or a way through the ceiling, it can be tested.
Who is the responsible person?
The law calls them the responsible person. It’s normally the employer, or whoever controls the building, and in shared buildings more than one person can have duties. If you’re not sure, check your lease and fire risk assessment.
Whose job is it to make sure fire dampers are tested?
The duty falls on the responsible person for the premises. Depending on the building, that can be the employer, owner, landlord or whoever manages it. We carry out the testing and give them the records.
Which accreditations do you hold?
We hold CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. The Vent Hygiene Elite scheme is run by BESCA and audited independently.
Do you test smoke dampers as well?
Yes. We operate each smoke damper from its controls and check it opens and closes fully. Where a controls contractor needs to be involved, we arrange it with you.
Fire damper testing in Anglefield Corner: local notes
Anglefield Corner is covered by Surrey Fire and Rescue Service. In most workplaces and other non-domestic buildings, it’s the fire and rescue authority that enforces the Fire Safety Order. At about 21 miles from central London, Anglefield Corner sits well inside the area we cover. The visit is fixed around your opening hours, not ours.
Hospitals such as East Surrey Hospital, about 4.5 miles west, are a good example of buildings with dampers on many floors; if you manage a clinic, surgery or care home near Anglefield Corner, the same annual testing applies.
Anglefield Corner is about 5 miles east of Horley, in Surrey. Every kind of commercial site in Anglefield Corner, we can take on fire damper testing. Visits can be booked for evenings, overnight or weekends so the site keeps running. Our area takes in 395 places across Surrey, large and small. There’s also a page for London, roughly 21 miles from Anglefield Corner.
Fire damper testing in RH9 follows the same survey, fixed quote and written report as everywhere else we cover. Local streets include Carlton Road and Eastbourne Road, all of which we cover for fire damper testing. If your site is just outside Anglefield Corner, we cover South Godstone (1 mile north-east), Crowhurst Lane End (2 miles north-east), Crowhurst (2 miles east), Tandridge (3 miles north-east) and Bletchingley (3 miles north-west). We also work in nearby towns such as Epsom (13 miles north-west), Horley (5 miles west), Redhill (5 miles north-west), Ewell (13 miles north-west), Reigate (6 miles west) and Caterham (6 miles north).
Near you in Anglefield Corner
For rail, the closest station is Godstone station, roughly 1.2 miles north-east. Well-known places in the area include Bletchingley Castle (3.1 miles north-west) and East Surrey Hospital (4.5 miles west). Open spaces near Anglefield Corner include Bay Pond and Hedgecourt Lake.
Why act early in Anglefield Corner
An untested damper is an unknown. Testing turns it into a known pass or a known fault, with remedials offered for anything that fails, which is far easier to plan for. Out of sight is the usual reason a rural system goes too long without attention.
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all make a difference.
Why book with us
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Full insurance on every job
- Accredited under CHAS and SafeContractor, with ISO 9001
- One contact for all your sites in London and the South East
See what affects the cost or our accreditations and certificates.
What staff can safely do
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We’ll take a look and send you a fixed quote.
How it works
We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool first, and the area around the work is covered and protected. The work itself takes a morning or an afternoon for a small number of dampers, longer where there are many. A few pictures of the system help us make the most of a visit to a place like Anglefield Corner.
- We gather what’s known about the dampers, from drawings, registers or past reports.
- We find every damper and open it up through the access panel.
- We release each fire damper blade and operate smoke dampers from their controls.
- Dampers that close fully are reset and left open.
- You get a report listing each damper, its result and any remedials needed.
Before we arrive
- Mention any parking or loading restrictions
- Plan for cooking equipment or plant to be off before we arrive
- Have your last certificate or report to hand
Ask for a quote
To help us quote: where the site is, what it is and its opening hours, a few photos and any previous report or certificate. Once you have those, phone us on 0345 646 2711, or email photos.
Related advice
Fixed quotes for fire damper testing in Anglefield Corner
There’s no set price list, because no two systems are the same. What we look at:
- The size of the system
- The times the site is available
- Site rules, permits and inductions
- Whether it’s a one-off visit or part of a schedule
Putting the work off seldom saves money. Build-up, wear and faults tend to get worse, not better, which can make the next visit longer. If you’re unsure, give us a ring on 0345 646 2711 or use the quote form and we’ll give you an honest view and a fixed quote.
Helping us quote
We can often survey from pictures. The most useful are:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- When the site is open and when it’s quiet
- A few general shots of the system
- Your last certificate, test record or report
The quickest way to a quote is to send photos: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Aftercare tips
Here’s the after-treatment advice, in brief:
- Book the next test before the year runs out
- Keep ceiling hatches and duct panels easy to open
- Never wedge or tie a damper open
- Update the register when ductwork changes
When we finish, we send a report covering every damper on the visit, with where it is and whether it passed. Keep it with the building’s fire safety records so it’s ready when your assessor or insurer asks.
Where a damper sits in ductwork that collects dust or grease, keeping that ductwork clean helps. It makes sense to plan duct cleaning and damper testing together.