Kent · Extract fan repair and replacement
Extract fan repair and replacement in The Platt, Kent
Professional extract fan repair in and around The Platt, timed so the site keeps working and finished with a written report and pictures.
- An extract fan that has stopped working
- An overheating extract motor
- An extract fan that rattles or knocks
Extract fan repair in The Platt: local notes
We cover The Platt, about 33 miles from central London, as part of our work across London and the South East. A survey and a fixed quote come first, then the visit at a time that suits you. It’s Wealden council that sends environmental health officers to food businesses in The Platt. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. A kitchen without a working fan has a problem to fix quickly.
Occasional-use kitchens, such as a hall kitchen near The Parish Church of St Alban or elsewhere in The Platt, are where a stiff or seized fan can turn up. If you run a school kitchen, at a school such as Frant Church of England Primary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term.
The Platt is about 4 miles south of Royal Tunbridge Wells, in Kent. Across the TN3 area, we can carry out extract fan repair at your premises. Our Kent coverage runs to 922 places, The Platt among them. There’s also a page for Maidstone, roughly 17 miles from The Platt.
We work across the TN3 postcode area for extract fan repair and the streets around it. Nearby, we also carry out extract fan repair in Frant (1 mile north), Mark Cross (2 miles south), Eridge Green (2 miles north-west), Town Row (3 miles south-west) and Tidebrook (3 miles south). Within a short drive, we also cover Sevenoaks (14 miles north), Royal Tunbridge Wells (4 miles north), Tonbridge (8 miles north), Kings Hill (14 miles north-east), Paddock Wood (8 miles north-east) and Southborough (5 miles north).
What’s near The Platt
In The Platt, that means kitchens and buildings near The George Public House and Eridge Park, among other places. For rail, the closest station is Frant station, about 1.7 miles north-east. A little further out are Tunbridge Wells Homeopathic Hospital (3.4 miles north) and The Corn Exchange (2.9 miles north). For a walk, there’s Broadwater Warren RSPB Reserve.
Extract fan repair in The Platt
Grease and fans do not mix. Deposits on the impeller throw it out of balance and the vibration wears out bearings and fixings. That is why we check the grease whenever we work on a fan, and a full TR19® clean can be booked alongside. The work covers bearings, roof and wall fans and belts and pulleys, and the jobs we see most are an extract fan that has stopped working and a fan worn beyond sensible repair.
In a small place like The Platt, fans are often on an outside wall or roof, open to wind and rain. That, with the grease, is hard on motors and bearings.
We are CHAS and SafeContractor accredited, we hold ISO 9001 and we are fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- The Platt (TN3)
- Wider area
- Kent
- Reporting
- Report and pictures after the visit
- Quotes
- Fixed quote, normally within a working day
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Call
- 0345 646 2711
- Reviewed
- 30 October 2026
Nearby places to The Platt
What else we do in The Platt
What affects the cost of extract fan repair
There’s no set price list, because no two systems are the same. The quote depends on:
- A single visit or a regular plan
- The times the site is available
- Travel, parking and unloading
- Whether we need access equipment or extra panels
The price reflects the work, not guesswork. That’s why we survey first, from pictures or on site, and why the quote is fixed before work begins.
Helping us quote
What to send for a quote:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Close-ups of filters, grilles, hatches or access panels
- Photos showing the whole system and its surroundings
- Your opening hours and when the area is out of use
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and we can price many jobs without a visit.
Aftercare tips
Here’s the after-treatment advice, short and simple:
- Keep the fan on a planned cleaning cycle
- Don’t cook with gaps in the filter bank
- Keep a record of any trips or stoppages
- Don’t wait for a noisy fan to stop
Listen to the fan over the next few weeks. A new noise or vibration is worth reporting early rather than waiting for it to fail.
Clogged filters make the fan strain. Keeping filters clean eases the strain and helps prevent overheating.
FAQs for The Platt
Can you come out to a failed extract fan in The Platt out of hours?
Our emergency line runs 24/7, and The Platt is within the area we cover. Phone 0345 646 2711 and we will talk through the fault and access. A photo of the fan’s rating plate helps.
Can you get to a site in The Platt?
Yes, we work in villages as well as towns, and The Platt is covered. Just mention lanes, gates or anything else about the site when you book.
What types of premises do you cover?
Commercial premises of every kind: kitchens, offices, schools, healthcare, retail, leisure and food production. Work is timed around how each site runs.
Does the law say we must follow TR19?
No. TR19® is BESA’s specification, not legislation. The law is the Regulatory Reform (Fire Safety) Order 2005, which makes the responsible person assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
How do you keep the site clean during the work?
Protection goes down first: sheeting over floors, worktops and anything close to the work. The area is left tidy, with our waste taken away.
How much time does a fan repair need?
As a guide, it takes a few hours for most repairs, longer for a full fan replacement. Where parts need ordering, we will explain the timescale.
What do you do with what you remove?
It’s contained and taken away. Grease, debris and waste water are collected as the work goes on rather than letting it spread.
Can we book visits on a schedule?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
Why act early in The Platt
A fan that’s running slowly is not clearing the kitchen properly. Staff work in hotter, steamier air and grease has more chance to settle on surfaces and in the duct. Planning a trip to The Platt ahead is easier for everyone than a rushed one.
Working hours, access and the scale of the site all affect the cost. We take each of them into account and give you a fixed price before work begins.
Why us?
- Photo reports with every job
- Fixed quotes, usually within one working day
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- Full insurance on every job
Read our cost guide or our accreditations.
What we do, step by step
We work around your opening hours, not the other way round. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we’re in, the area is sheeted and anything that has to be off is turned off and cooled, and the work takes a few hours on site, depending on the fault and the access to the fan. The timing of a visit to The Platt is set by you, and the travel is our side of the planning.
- We agree a time to attend, out of hours if needed.
- The extract is switched off and the fan opened up.
- We inspect every moving part and the fixings.
- You hear whether repair or replacement makes sense, with a fixed quote.
- We complete the work and check the fan runs smoothly.
Preparing for the visit
- Agree a time when the area can be out of use
- Let us know how we reach the system, including roofs, risers and plant rooms
- Find the previous report, if there is one
Ask for a quote
We do not publish a price list, because no two systems are the same. Instead, we look at your site first, from photos or a survey, then send a fixed quote. To start, give us a ring on 0345 646 2711 or drop us a line.
Read more
Landlords, agents and facilities managers
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
We also work for facilities teams across offices, schools and healthcare in The Platt and across Kent. Work can be phased by floor, building or site to keep disruption down.
Different parts, different methods
Motors and bearings
A grinding or rumbling noise often means worn bearings. We find out whether the bearings or the motor is at fault and then recommend the fix.
Roof and wall-mounted fans
Fans are often mounted on roofs or external walls. How easy the fan is to reach shapes the job, so we ask about it early.
Honest limits
An honest diagnosis matters more to us than a booking, so here’s what extract fan repair will not do:
- Ductwork designed too small for the kitchen’s cooking
- Cooking smells reaching neighbours, which may need odour control
- Problems with the electrical supply to the fan (an electrician’s job)
Not sure which it is? You can ring 0345 646 2711 or use the quote form and we’ll tell you honestly.
Where we work
- Kitchen extract fans
- Fan housings
- Bearings
- Belts and pulleys
- Roof and wall fans
- Fan motors