Greater London · Extract fan repair and replacement
Temple Mills extract fan repair
Professional extract fan repair in and around Temple Mills, timed so the site keeps working and signed off in writing with photos.
- A humming noise from the fan motor
- An old fan that needs replacing
- A fan that won’t start at all
Extract fans in Temple Mills
The FSA’s food hygiene register shows about 437 restaurants, cafés and works canteens and about 175 takeaways and sandwich shops in Temple Mills and the streets around it, up to about 1.5 miles out. A kitchen with a dead extract fan gets hot and smoky fast, and kitchens like these feel it at once. London extract fans are often at the end of long duct runs, on roofs or in basements. It’s Newham council that sends environmental health officers to food businesses in Temple Mills. Food hygiene rules expect food premises to have suitable and sufficient ventilation. So a failed fan is worth fixing before the next service, not the next month.
Occasional-use kitchens, such as a hall kitchen near St Eleutherius or elsewhere in Temple Mills, are where a stiff or seized fan can turn up. If you cook near Stratford International station, long trading hours wear fan belts and bearings, so noise and vibration are worth reporting early.
Temple Mills is about 1 mile north-west of Stratford, in Greater London. Every kind of commercial site in Temple Mills, we can take on extract fan repair. We can work out of hours so trading is not interrupted. We cover 764 places across Greater London, from busy centres to quieter spots.
We cover every part of E20, E15 and E9 for extract fan repair and the roads nearby. Extract fan repair is available to premises on Major Road, Forbes Lane and Keirin Road and nearby roads. Temple Mills sits on or near the A106, which makes travel easy for evening and night visits. Other places close to Temple Mills include East Village (1 mile south-east), Hackney Wick (1 mile south-west), Stratford (1 mile south-east), Maryland (1 mile south-east) and Fish Island (1 mile south-west). Further out, we also cover London (5 miles south-west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (9 miles south-west), St Pancras (5 miles west) and Shoreditch (3 miles south-west).
What’s near Temple Mills
Around Temple Mills, our work takes us to kitchens and buildings near Mabley Green, Mossbourne Riverside Academy and Eton Manor Boys' Club. There’s a railway station in Temple Mills itself: Stratford International station. Nearby you’ll also find V&A East (0.6 miles south) and Westfield Stratford City (less than half a mile south-east). Open spaces near Temple Mills include Tower Hill and Hollow Pond.
Extract fan repair in Temple Mills, done properly
Grease is hard on extract fans. A coated impeller spins unevenly, which shakes the bearings and mountings. So when we repair extract fan, we look at the grease too, and a full TR19® clean can be booked alongside. We’re often asked to deal with a motor that trips out or overheats and a squealing belt on start-up, across bearings, fan motors and roof and wall fans.
In London, a kitchen without working extraction can’t keep cooking safely, and a closed kitchen loses a night’s trade. Fans in Temple Mills are often on a roof or in a basement at the end of a long duct run, so access is the first thing we ask about.
Think of the report as the system’s health record: dated, with photos, and showing what was done. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal and sits alongside the report.
- Where
- Temple Mills (E20, E15, E9)
- Region
- Greater London
- Reporting
- Written report with pictures
- Quote
- A fixed price before we start
- Hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Signs you need extract fan repair in Temple Mills
Some faults are in the controls rather than the fan. Speed controllers, isolators and wiring can all fail so we check the controls before blaming the motor.
What we are most often called out for:
- A knocking noise from the extract fan
- A failed fan that needs a replacement
- A fan that won’t start at all
- Vibration spreading from the fan into the ducts
For school kitchens, at schools like Chobham Academy for example, a planned fan repair in the holidays avoids losing lunches in term time.
Before you book anyone
- If they look at the system before pricing
- Exactly which parts of the system are covered
- When the next visit should be, and why
- Proof of accreditation you can verify
Temple Mills: your questions answered
Which council inspects kitchens in Temple Mills?
In Temple Mills, it’s Newham council that carries out food hygiene inspections. If the extract fan has failed, it’s worth having the repair booked, and the details to hand, before an officer visits.
Is parking a problem for work in Temple Mills?
A loading bay, a visitor permit or off-street space near the site in Temple Mills makes the visit easier to plan. Where restrictions apply in the day, an evening or overnight visit normally gets round them.
What accreditations do you have?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, and TR19® Air covers general supply and extract systems.
Will I get paperwork for my records?
Yes. You get a written report with photos after each visit, covering the work, any areas we couldn’t access and the recommended next date. Kitchen extract cleans to TR19® Grease also get a certificate through the BESCA Vent Hygiene Elite portal.
Can you set up regular visits?
Yes. Scheduled maintenance plans are part of what we do, with visits at the interval your system needs. Each report recommends when the next visit should be.
How do you keep the site clean during the work?
Protection goes down first: sheeting over floors, worktops and anything close to the work. We tidy up and take our waste away before we leave.
Can you look after several sites?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Each site gets its own report and pictures.
Nearby places to Temple Mills
Other services in Temple Mills
Leave it or put it right?
In Temple Mills, as elsewhere, an extract fan may well sit outside on a wall or roof, so its noise doesn’t stay in the kitchen. Dealing with the fault brings the noise back down before it becomes a nuisance. It’s better booked as a planned job in Temple Mills than handled as an emergency.
Every site is different, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
Why book with us
- CHAS and SafeContractor accredited, with ISO 9001
- Every job surveyed first
- We are fully insured
- Every visit written up, with pictures
What your team can do, and what needs us
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, it’s best reported rather than tackled in-house. We can diagnose it and quote.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
What affects the quote in Temple Mills
Before we fix a price, we need to know a few things. We check:
- Whether several sites go on one quote
- How easy every part is to reach
- The size of the system
- Any permits to work or inductions
What you pay depends on the size of the system, what state it’s in and how easy it is to reach. We give you a fixed price before any work starts, so you know where you stand.
Asking for a quote
To speed up the quote, send us:
- The site address and the type of premises
- When the site is open and when it’s quiet
- Wide pictures of the system and the area around it
- Close-ups of filters, grilles, hatches or access panels
Here’s what helps us quote: where the site is, what it is and its opening hours, a few photos and any previous report or certificate. Once you have those, phone us on 0345 646 2711, or email photos.
Keeping the system healthy
Aftercare is simple, and it helps at the next visit:
- Get a noisy fan checked rather than slowed down
- Book regular TR19 cleaning, which includes the fan
- Keep the emergency number where staff can see it
- Report new noises from the fan early
Keep an ear on the fan after the repair. A new noise or vibration is worth reporting early rather than waiting for it to fail.
Noise is typically the first sign of a fan problem. Booking a check at this stage keeps it a planned job rather than an emergency during service.
Part by part
Motors and bearings
Rumbling and grinding normally come from the bearings. We diagnose whether it’s the bearings or the motor itself and then recommend the fix.
Direct-drive fans
Direct-drive fans are compact and common in kitchen extracts. When the motor fails, replacing the whole fan unit can make more sense than repairing it, and we will explain why.
What happens on the day
When we arrive, we check the system against the survey or the pictures you sent. Anything unexpected is raised with you before we go further. After that, the work takes anything from an hour or two to a full visit, depending on the fault. In a London area like Temple Mills, parking, loading and building access are planned before the day of the work.
- You describe the fault and we arrange a visit.
- On site, the fan is safely isolated.
- We diagnose the fault, checking the controls as well as the fan.
- A fixed quote for the repair or replacement follows.
- The work is done and the fan is tested running.
How to prepare
- Name a contact who can let us in at the agreed time
- Let us know about parking and loading
- Let us know when the site is closed or quiet
Getting a quote
Every quote begins with a look at the system, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before work begins.