Kent · Extract fan repair and replacement
Extract Fan Repair in Small Hythe
Extract fan repair in Small Hythe from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- A worn or slipping fan belt
- An overheating extract motor
- Poor airflow at the canopy
What a clean will not put right
An honest diagnosis matters more to us than a booking, so here’s what this work can’t put right:
- Wiring and supply faults beyond the fan itself
- A system that needs redesigning rather than repairing
- Grease throughout the ductwork, which needs a full TR19 clean
If you’re not sure, just call 0345 646 2711, or send details by email and we will give you a straight answer.
What the work covers
- Roof and wall fans
- Fan housings
- Fan motors
- Bearings
- Kitchen extract fans
- Belts and pulleys
Extract fan repair for kitchens and businesses in Small Hythe
Before anything is ordered, we diagnose. The motor, drive, impeller, bearings and mounts are all checked and the speed control too. After that, you get a fixed price for what’s needed. Typical jobs include a fan that whines, hums or grinds and an extract that vibrates through the ductwork, across bearings, belts and pulleys and fan motors.
In a small place like Small Hythe, fans are often on an outside wall or roof, open to wind and rain. That, with the grease, is hard on motors and bearings.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Place
- Small Hythe (TN30)
- Region
- Kent
- Reporting
- Written report with photos
- Quote
- A fixed quote up front
- Working hours
- Nights, weekends or holidays to suit you
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Places near Small Hythe
More services for Small Hythe
When to call us in Small Hythe
Fans everywhere, Small Hythe included, live in a hard environment: heat, grease, steam and long running hours. Moisture can rust housings and fixings and eventually any fan simply wears out.
Clients typically contact us after spotting one of these:
- A dead fan motor
- A worn or slipping fan belt
- An overheating extract motor
- An old fan that needs replacing
School kitchens can’t easily serve lunch without extraction, so if you look after one at a school like Homewood School and Sixth Form Centre, fix a failing fan before term starts.
What your quote should include
- When the next visit should be, and why
- If the quote is a fixed price or an estimate
- Whether the work can be done while the site is closed
- If they look at the system before pricing
Part by part
Belt-driven fans
Belt drives have more moving parts than direct-drive fans. That means more to check, but often a simpler repair.
Motors and bearings
The motor and its bearings work hardest. Hot, greasy air and long days wear them down.
Landlords, agents and facilities managers
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with photos.
We also work for facilities teams across offices, schools and healthcare across Kent. Larger estates can be phased building by building around the people who use them.
How we price extract fan repair
The price is fixed before any work begins. It takes into account:
- Parking and loading at the site
- Whether we need access equipment or extra panels
- Site requirements such as sign-in and permits
- A single visit or a regular plan
The price reflects the work, not guesswork. That is why every job is surveyed first, and why the quote is fixed before work begins.
Asking for a quote
When you call or email, these details help:
- Your last certificate, test record or report
- The times we could work without disrupting the site
- The postcode and the type of business
- Wide photos of the system and the area around it
For a fixed quote, ring 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. You’ll normally have a quote within one working day.
When a fan fails in Small Hythe
Small Hythe, about 47 miles from central London, is within our usual area. A survey and a fixed quote come first, then the visit at a time that suits you. Food hygiene inspections in Small Hythe are the job of Ashford council’s environmental health team. A kitchen with no working extract can fall short of the suitable and sufficient ventilation food hygiene rules expect. So a failed fan is worth fixing before the next service, not the next month.
If you run a church or community hall kitchen, near Church of St John the Baptist or elsewhere in Small Hythe, an extract fan that rarely runs can seize or fail when it’s needed.
Small Hythe is about 10 miles south-west of Ashford, in Kent. From the centre of Small Hythe to the outskirts, we cover extract fan repair for every kind of premises, from small sites to large estates. Our Kent coverage runs to 922 places, and Small Hythe is one of them. Maidstone is in our area too, about 17 miles from Small Hythe.
Postcode districts we cover here for extract fan repair: TN30. Other places close to Small Hythe include Broad Tenterden (1 mile north), Tenterden (2 miles north), Strood (2 miles north-west), Rolvenden Layne (3 miles west) and Rolvenden (3 miles west). Within a short drive, we also cover Ashford (10 miles north-east), Park Wood (15 miles north-west), Kennington (12 miles north-east), New Romney (11 miles east), Staplehurst (11 miles north-west) and Stanhope (9 miles north-east).
What’s near Small Hythe
Other landmarks nearby include Benenden Hospital (4.8 miles north-west) and Smallhythe Place (within half a mile south). Not far away are Flatropers Wood.
Looking after it afterwards
To keep the system working properly between visits:
- Make sure staff know who to call if the fan fails
- Keep the area around the fan controls clear
- Get a noisy fan checked rather than slowed down
- Keep the grease filters clean and fitted
Before we leave, the fan is run and checked. You will hear what we found and what we did along with anything else that needs watching.
Clogged filters make the fan strain. Keeping filters clean eases the strain and helps prevent overheating.
What happens on the day
We turn up at the time agreed with you, which is often after service, overnight or at a weekend. Anything that needs to be off for the work is switched off and left to cool before work begins, and floors and nearby surfaces are sheeted. The work itself takes anything from an hour or two to a full visit, depending on the fault. Somewhere as small as Small Hythe, the date and timings are agreed with you well before the day.
- A visit is booked, in the evening or overnight if that suits.
- The extract is switched off and the fan opened up.
- Bearings, drive, impeller, motor and mounts are inspected.
- You hear whether repair or replacement makes sense, with a fixed quote.
- The fan is repaired or replaced, then checked running.
Before we arrive
- Let us know how we reach the system, including roofs, risers and plant rooms
- Move anything stored near the system
- Let us know about permits to work or site inductions
Getting a quote
Here’s what helps us quote: where the site is, what it is and its opening hours, photos of the system and the last certificate or report, if there is one. Then ring 0345 646 2711, or email photos.
Advice
Small Hythe questions
Do you work in villages like Small Hythe?
Yes, smaller places are covered as well as towns. A survey first, from pictures or a visit, means we arrive with the right kit.
What if my kitchen extract fan stops in Small Hythe at night?
Our emergency line runs 24/7, and Small Hythe is within the area we cover. Phone 0345 646 2711 and we will talk through the fault and access. Details of the make and model help us plan the repair.
Does the law say we must follow TR19?
No. TR19® itself is not law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Can you supply and fit a replacement fan?
We do. Where a fan is beyond repair, we replace it with one suited to the duct and the kitchen with a fixed price agreed before work begins.
Do you look at the system first?
Yes, always. Diagnosis comes before treatment: the survey tells us what the system needs and how to reach it, and the quote is based on that.
Does a faulty extract fan always need replacing?
Often, yes. A clean, a new belt or new bearings can bring a fan back and we only recommend replacement when repair does not make sense.
Do we lose a day’s trading?
Not normally. Visits are timed for when the area is closed, such as overnight or at a weekend, so the site can carry on as normal.
What is TR19?
TR19® is BESA’s specification for ventilation hygiene. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.