Kent · Extract fan repair and replacement
Extract fan repair and replacement in Park Wood, Kent
Extract fan repair across Park Wood and nearby, booked around your opening hours and signed off in writing with pictures.
- A fan that keeps cutting out
- An extract fan that has stopped working
- A worn or slipping fan belt
Looking after it afterwards
Results last longer with the right care. We suggest:
- Avoid lowering the speed to quieten a fault
- Make sure the isolator and controls are easy to reach
- Write down when the fan misbehaves
- Save our number for the 24/7 emergency line
Keep an ear on the fan after the repair. If anything changes, let us know, so it can be looked at before it grows.
When filters block, the fan works harder. Changing or cleaning them on time takes load off the motor and protects the motor.
About our extract fan repair in Park Wood
Every fan job begins with finding the fault. Noise can come from grease on the impeller, worn bearings or a slipping belt, while a fan that will not start may have a motor or control fault. You hear what we have found before any work goes ahead. Typical jobs include a whining or grinding extract motor and a fan worn beyond sensible repair, across fan housings, bearings and fan motors.
For a fan repair near Park Wood, we plan the journey and bring what the job is likely to need, so pictures of the fan and its rating plate help.
Nothing is signed off by word of mouth: a written report, dated and illustrated with photos, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Park Wood (ME15, ME17, ME14)
- Wider area
- Kent
- Records
- Written report with pictures
- Quote
- Fixed quote, typically within a working day
- When we work
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Last updated
- 30 October 2026
Nearby places to Park Wood
Also in Park Wood
Multi-site and managed buildings
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side, and the report can go to both.
Managing agents often deal with us directly. Send the address, what’s needed and how access works and we’ll come back with a fixed quote.
Why act early in Park Wood
A struggling motor runs hotter and works harder. Every hour of strain takes its toll, and when it finally fails, it may take other parts with it. Catching it early keeps the repair small. Systems on quieter sites still build up dirt and wear, just more slowly.
Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered and we’ll price it together.
Why choose Duct Doctor in Park Wood
- In business since 2009
- Out-of-hours work and a 24/7 emergency line
- We diagnose before we treat
- A fixed price before any work starts
Read our cost guide and our accreditations and certificates.
What a clean won’t put right
A few issues sit outside what this work can do:
- Grease build-up in the rest of the extract system
- Faults on the gas side of an interlock system, which need a Gas Safe registered engineer
- An extract system that was undersized from the start
If in doubt, phone us on 0345 646 2711 or use the quote form and we will say what we think before you book.
Where we work
- Kitchen extract fans
- Fan housings
- Bearings
- Fan motors
- Roof and wall fans
- Belts and pulleys
When to call us in Park Wood
Fans everywhere, Park Wood included, live in a hard environment: heat, grease, steam and long running hours. Moisture can rust housings and fixings, and age catches up with every fan in the end.
What we are most often called out for:
- An extract fan that rattles or knocks
- A belt-driven fan that squeals
- A fan running too slowly to clear the kitchen
- An overheating extract motor
Hall kitchens near St Martin's Church, or anywhere around Park Wood, often use their fans only now and then, and an idle fan can stick.
What your quote should include
- When they can work, and whether that’s outside your opening hours
- How VAT is shown on the quote
- Proof of accreditation you can verify
- Exactly which parts of the system are covered
Extract fan repair in Park Wood: local notes
Look up Park Wood on the FSA’s food hygiene register and you will find about 22 cafés, restaurants and staff canteens and about 13 takeaways within 1.5 miles or so of the middle of Park Wood. Those that cook under a canopy rely on a fan that runs every hour they’re open. It’s Maidstone council that sends environmental health officers to food businesses in Park Wood. Food premises are expected to have suitable and sufficient ventilation under food hygiene rules. So a failed fan is worth fixing before the next service, not the next month. Park Wood is about 33 miles from central London, well within the area we cover across London and the South East. Visits are booked around your hours, evenings and weekends included.
School kitchens cannot easily serve lunch without extraction, so if you look after one at a school like Tree Tops Primary Academy, fix a failing fan before term starts.
Park Wood is about 2 miles south-east of Maidstone, in Kent. We carry out extract fan repair for commercial premises of every kind in Park Wood and the rest of Kent. Park Wood is one of 922 places in Kent we cover for commercial clients.
Extract fan repair in ME15, ME17 and ME14 follows the same survey, fixed quote and written report as everywhere else we cover. That includes premises on Bell Road, Selby Road and Essex Road and the roads around them. You will find Park Wood on the A274, so it’s easy for us to get to for out-of-hours visits. Nearby, we also carry out extract fan repair in Otham (1 mile north-east), Willington (1 mile north), Boughton Monchelsea (1 mile south-west), Shepway (1 mile north) and Boughton Green (1 mile south-west). Further out, we also cover Ashford (15 miles south-east), Sittingbourne (11 miles north-east), Royal Tunbridge Wells (14 miles south-west), Gravesend (15 miles north-west), Tonbridge (12 miles west) and Faversham (15 miles east).
Local landmarks in Park Wood
In Park Wood, that means kitchens and buildings near Mote Park, New Line Learning Academy and The White Horse pub. The nearest railway station is Maidstone West station, about 2.6 miles north-west. Nearby you will also find Sutton Valence Castle (2.7 miles south-east) and The Mall Maidstone (2.5 miles north-west). Green spaces nearby include Detling Hill.
How the visit works
We start by comparing what we find with the survey or your pictures. Anything unexpected is raised with you before we go further. From there, it takes a few hours on site, depending on the fault and the access to the fan. Around Park Wood, access is typically simpler than in a town centre, though gates and roof access are worth mentioning.
- We take details of the symptoms and book a time that suits the kitchen.
- On site, the fan is safely isolated.
- The fan and its controls are checked to pin down the fault.
- A fixed quote for the repair or replacement follows.
- The work is done and the fan is tested running.
Before we arrive
- Name a contact who can let us in at the agreed time
- Agree a time when the area can be out of use
- Make sure equipment near the work can be switched off and left to cool
Get a fixed quote
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
Advice
Park Wood questions
Which council inspects kitchens in Park Wood?
That’s Maidstone council, whose environmental health officers carry out food hygiene inspections in Park Wood. Inspections are risk-based, so a visit can come at any time, including the week a fan stops.
Can you get to a site in Park Wood?
Yes. Villages and rural sites across the South East are part of our work, Park Wood included. Just mention lanes, gates or anything else about the site when you book.
Are you accredited?
BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001. We’ve been trading since 2009 and we’re fully insured.
Does a faulty extract fan always need replacing?
Often, yes. Many faults are fixed by cleaning the impeller or renewing worn parts and we only recommend replacement when repair doesn’t make sense.
Should the fan be cleaned as well as repaired?
The ductwork is a separate job. We’ll point out grease where we find it and quote for a TR19 clean if it’s needed.
Can you supply and fit a replacement fan?
Yes. We fit replacement fans as well as repairing old ones and we’ll talk you through what’s involved.
Why is our extract fan so noisy?
There are several possible causes, from a worn bearing to a loose fixing. It’s worth having it diagnosed before it leads to a breakdown.
What should go in our maintenance log?
Visit reports, certificates and your in-house cleaning logs. They’re what an insurer, fire officer or EHO may ask for, so keep them where they can be found quickly.
Different parts, different methods
Belt-driven fans
In a belt-driven fan, the motor drives the impeller by belt. Belts wear, stretch and slip, so we check the pulleys and bearings as well.
Direct-drive fans
Many kitchen extracts use direct-drive fans. When the motor fails, replacing the whole fan unit can make more sense than repairing it and we’ll talk you through it.