West Sussex · Extract fan repair and replacement
Redford extract fan repair
Extract fan repair in Redford from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- A humming noise from the fan motor
- A fan shaking on its mountings
- A fan rattling in its housing
Extract fan repair for kitchens and businesses in Redford
Grease and fans don’t mix. Deposits on the impeller throw it out of balance, which shakes the bearings and mountings. So when we repair extract fan, we look at the grease too, and a full TR19® clean can be booked alongside. If you are dealing with a belt-driven fan that squeals and an extract fan that has stopped working, we can help, from belts and pulleys, fan motors and fan housings onwards.
Rural kitchens often have fans mounted on outside walls or roofs, exposed to the weather. That, with the grease, is hard on motors and bearings.
It’s worth checking any contractor’s accreditations. We’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Place
- Redford (GU29)
- Wider area
- West Sussex
- Reporting
- Written report with pictures
- Quotes
- A fixed quote up front
- Working hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Checked
- 30 October 2026
Questions from Redford
Which environmental health team covers Redford?
Food hygiene inspections in Redford are carried out by Chichester council. An officer may ask how the kitchen is ventilated, so keep repair records with your maintenance file.
Will you come out to Redford?
Yes. Redford is within the area we cover across London and the South East. Just mention lanes, gates or anything else about the site when you book.
Do you have a 24/7 line?
Yes. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
Will you tell us when the next visit is due?
Yes. The recommended date is on the report. For kitchen extracts, BESA’s minimum intervals run from every 3 months for heavy use to every 12 months for light use, and fire dampers need testing at least once a year.
What happens to the waste?
It leaves the site with us when we go. During the work, it’s contained to keep the area clean.
Does a faulty extract fan always need replacing?
It depends on the fault. We diagnose first and tell you whether a repair is realistic and quote a fixed price for the option you choose.
What is TR19?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
Looking after it afterwards
Once we’ve finished, these simple steps help:
- Keep access to the fan controls unobstructed
- Report new noises from the fan early
- Keep the fan on a planned cleaning cycle
- Do not turn the fan down to hide a noise
Once we are done, the extract is back in service. We clear up after ourselves and talk you through what we found.
Noise is typically the first sign of a fan problem. Getting it checked now means a planned repair instead of a breakdown at the worst moment.
What a clean will not put right
A few issues sit outside what this work can do:
- Wiring and supply faults beyond the fan itself
- Cooking smells reaching neighbours, which may need odour control
- A system that needs redesigning rather than repairing
Not sure which it is? You can give us a ring on 0345 646 2711 or send us an email and we’ll tell you honestly.
Where we work
- Kitchen extract fans
- Fan housings
- Roof and wall fans
- Belts and pulleys
- Fan motors
- Bearings
Why deal with it now?
An overloaded motor is under constant strain. Every hour of strain takes its toll and a burnt-out motor is a bigger job than a worn belt. Early attention keeps the cost and disruption down. Rural sites can’t always move to another kitchen or room when something fails.
Working hours, access and the scale of the site can all change the price. Each of those is built into the quote, and the price is fixed before we start.
What you get with us
- Trading since 2009
- One number for every site across the South East and London
- Photo reports with every job
- A fixed price before any work starts
Read how cleaning jobs are priced and our accreditations and certificates.
What staff can safely do
Logging matters as much as cleaning. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
What we do, step by step
Your trading hours come first. We book the visit for a time the area is closed, whether that’s an evening, overnight or a weekend. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the job takes part of a day for most faults, with a return visit if parts have to be ordered. Photos of the system and how to reach it help us plan a visit to Redford.
- First, you tell us the symptoms: noise, shaking, weak extraction or no power.
- Power to the fan is isolated before we open the housing.
- Each part is checked in turn: motor, bearings, drive, impeller and fixings.
- You hear what’s wrong and what it will cost, with a fixed quote, before we go ahead.
- Once the work is done, we run the fan and check it’s steady and quiet.
Preparing for the visit
- Have your last certificate or report to hand
- Let us know about parking and loading
- Tell us the best time to work, such as after service or at a weekend
Ask for a quote
Quoting starts with a diagnosis, from your photos and details or, where that isn’t enough, a survey on site. Then we send a fixed price so you know the cost before any work starts.
Read more
Part by part
Belt-driven fans
Belt-driven fans have a motor that turns the impeller through belts and pulleys. Belts wear, stretch and slip, and pulleys and bearings need checking too.
Roof and wall-mounted fans
An external fan’s rattle can be heard outside. It’s often down to loose mounts or worn bearings.
When a fan fails in Redford
Kitchens in Redford get their food hygiene inspections from Chichester council. Ventilation is part of food hygiene law, which expects it to be suitable and sufficient. That makes a fan repair urgent rather than something to put off. Redford is about 44 miles from central London, well within the area we cover across London and the South East. Evening, overnight and weekend visits are all possible.
Fan failures around Redford do not keep office hours, and neither does our emergency line.
Redford is about 7 miles east of Petersfield, in West Sussex. Whether your site is in the middle of Redford or further out, extract fan repair is available to all kinds of commercial premises, from a single unit to a large public building. Redford is one of 371 places in West Sussex where we work for extract fan repair. Guildford is in our area too, around 17 miles away.
Extract fan repair in GU29 is surveyed, quoted and booked the same way as anywhere else. Close by, we work in Fernhurst (3 miles north-east), Linchmere (3 miles north), Kingsley Green (3 miles north-east), Woolmer Hill (4 miles north) and Hammer (4 miles north). Further out, we also cover Chichester (13 miles south), Emsworth (14 miles south-west), Billingshurst (14 miles east), Portfield (13 miles south), Midhurst (3 miles south) and Arundel (15 miles south-east).
Landmarks near Redford
Redford’s nearest station is Liphook station, roughly 3.1 miles north. A little further out are Midhurst Museum (3.3 miles south-east) and Midhurst Community Hospital (3 miles south-east). Green spaces nearby include Cooksbridge Meadow and Wheeler's Down.
Do you need extract fan repair in Redford?
Grease that gets past the filters ends up on the fan. It builds up on the impeller blades unevenly, and an unbalanced impeller shakes and starts to vibrate and rattle.
These are the problems we see most often:
- A worn or slipping fan belt
- An extract that vibrates through the ductwork
- A motor that trips out or overheats
- A fan rattling in its housing
Hall kitchens near Church of St Luke, or anywhere around Redford, often use their fans only now and then, and an idle fan can stick.
Comparing quotes
- Whether they’re fully insured
- What records you’ll receive afterwards
- Whether a survey comes first
- How areas they can’t reach will be recorded