Kent · Extract fan repair and replacement
Extractor fan repair in Bloodden
Extract fan repair and replacement for Bloodden, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- A whining or grinding extract motor
- An extract that vibrates through the ductwork
- An old fan that needs replacing
Extract fan repair for kitchens and businesses in Bloodden
If an extract fan in Bloodden is struggling or has stopped, we diagnose the fault and send you a fixed quote for the repair or the replacement. When the fan gives up mid-service, our 24/7 emergency line is there. If you have a fan running too slowly to clear the kitchen and a squealing belt on start-up, we can help, from fan motors, belts and pulleys and roof and wall fans onwards.
In a village or hamlet like Bloodden, the kitchens with extract fans are few, wherever there are any. A failed fan stops the kitchen, and our 24/7 emergency line covers rural addresses too.
Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
- Location
- Bloodden (CT3)
- Wider area
- Kent
- Records
- Written report with pictures
- Quotes
- Fixed quote, usually within a working day
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Looking after it afterwards
So the system stays in good health:
- Keep the emergency number where staff can see it
- Clean or change filters on schedule
- Do not turn the fan down to hide a noise
- Tell us about a new rattle or whine right away
Once the fan is running smoothly, keep the filters clean. Less grease on the impeller means less wear and the quieter it runs.
The fan is part of every full TR19 clean. Keeping grease off the impeller is one of the simplest ways to protect it and that means less wear.
Places near Bloodden
Other services in Bloodden
What we do, step by step
Everything the job needs comes with us, from protective sheeting to tools and access equipment. You only need to give us clear access and switch off what needs to be off. The visit takes a few hours for most repairs, longer for a full fan replacement. Visits to a village like Bloodden are booked in advance, at a time that suits whoever runs the site.
- You describe the fault and we arrange a visit.
- We isolate the fan before touching it.
- The fan and its controls are checked to pin down the fault.
- A fixed quote for the repair or replacement follows.
- We fix the fault and run the fan to check it.
How to prepare
- Find the previous report, if there is one
- Allow time for equipment near the work to be turned off and cool down
- Name a contact who can let us in at the agreed time
Get a fixed quote
Some systems can be priced from pictures; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, you get a fixed price before we start.
Read more
Multi-site and managed buildings
Records are where multi-site compliance often slips. Each visit produces a dated report with pictures, so you can show an insurer or inspector what was done at each site.
From a single site to a large estate, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Honest limits
In fairness, there are a few things this work won’t fix:
- Problems with the electrical supply to the fan (an electrician’s job)
- Odour complaints that need filtration rather than a fan repair
- Grease throughout the ductwork, which needs a full TR19 clean
If in doubt, call us on 0345 646 2711 or send us an email and we’ll say what we think.
Where we work
- Fan motors
- Bearings
- Belts and pulleys
- Roof and wall fans
- Fan housings
- Kitchen extract fans
Why deal with it now?
A struggling motor runs hotter and works harder. Every hour of strain takes its toll and a burnt-out motor is a bigger job than a worn belt. Early attention keeps the cost and disruption down. Rural sites can’t always move to another kitchen or room when something fails.
Working hours, access and the scale of the site all affect the cost. We take each of them into account and give you a fixed price before any work starts.
Why Bloodden businesses choose us
- Survey first, then a fixed quote
- Fixed quotes, usually within one working day
- Accredited under CHAS and SafeContractor, with ISO 9001
- One number for every site across the South East and London
Read how cleaning jobs are priced or our accreditations and certificates.
What extract fan repair looks like in Bloodden
Look up Bloodden on the FSA’s food hygiene register and you’ll find about 5 restaurants, cafés and works canteens and about 5 sandwich bars and takeaways within roughly a mile and a half of the centre of Bloodden. For any of them with a canopy, the extract fan is what keeps the kitchen usable. At about 58 miles from central London, Bloodden sits well inside the area we cover. Visits are booked around your hours, evenings and weekends included. Kitchens in Bloodden get their food hygiene inspections from Canterbury City council. Under food hygiene rules, a kitchen needs suitable and sufficient ventilation. So a failed fan is worth fixing before the next service, not the next month.
If you run a school kitchen, at a school such as Adisham Church of England Primary School or nearby, a fan that is getting noisy is best repaired in the holidays before it fails in term. Hall kitchens near Church of the Holy Innocents, or anywhere around Bloodden, often use their fans only now and then, and an idle fan can stick. If you cook near Adisham station, long trading hours wear fan belts and bearings, so noise and vibration are worth reporting early.
Bloodden is about 6 miles south-east of Canterbury, in Kent. We carry out extract fan repair for businesses, landlords and public buildings in Bloodden and the rest of Kent. Across Kent, we cover 922 places, Bloodden among them. Maidstone is in our area too, around 29 miles away.
All of CT3 is within our area for extract fan repair, from busy streets to back roads. We also cover the places around Bloodden: Adisham (1 mile north-west), Aylesham (1 mile south), Bramling (2 miles north), Bekesbourne (2 miles north-west) and Womenswold (2 miles south). Larger places within reach include Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (11 miles south), Ramsgate (12 miles north-east) and Broadstairs (13 miles north-east).
Around Bloodden
Bloodden has its own railway station: Adisham station. A little further out are St Martins Hospital (4.5 miles north-west).
How we price extract fan repair
We quote each job individually. This is what makes a difference:
- Working hours and out-of-hours timing
- How many systems or sites are involved
- Any permits to work or inductions
- Parking and loading at the site
No two sites are the same, so we price each one individually. Size, access, the condition of the system and when we can work all play a part.
Asking for a quote
We can often survey from pictures. Try to include:
- When the site is open and when it’s quiet
- The paperwork from the last visit, if you have it
- Close-ups of filters, grilles, hatches or access panels
- Where the plant sits or the system leaves the building, such as a roof or outside wall
For a fixed quote, ring 0345 646 2711 or drop us a line and tell us the type of site, your opening hours and roughly what the system looks like. Photos and the last report, if you have one, make the quote quicker. You will normally have a quote within one working day.
Common questions in Bloodden
Who would carry out a food hygiene inspection at a kitchen in Bloodden?
That’s Canterbury City council, whose environmental health officers carry out food hygiene inspections in Bloodden. Inspections are risk-based, so a visit can come at any time, including the week a fan stops.
Will you come out to Bloodden?
Yes, smaller places are covered as well as towns. Photos of the system and directions to the site help us plan the visit.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We have been trading since 2009 and we are fully insured.
What is TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not law, but it’s the benchmark.
What causes a noisy extract fan?
Grease on the blades throws the fan out of balance, which is a common cause of noise. Bearings, belts and mountings can also be to blame.
What types of premises do you cover?
All kinds of commercial and public premises: kitchens, offices, schools, healthcare, retail, leisure and food production. We fit the work around how the site operates.
How long will the fan be out of action?
It depends on the fault, but most jobs take a few hours on site, depending on the fault and the access to the fan. We will give you a better idea once we have diagnosed it.
Does a faulty extract fan always need replacing?
We look at repairing it first. Where the motor has burnt out or the fan is worn out, replacing it can be the better answer, and we will explain why.
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Regular in-house cleaning slows the build-up, but the parts you cannot see still need a specialist at the right interval.
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they can’t safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.