Isle of Wight · Extract fan repair and replacement
Extractor fan repair in Arreton
Extract fan repair and replacement for businesses, landlords and public buildings in Arreton. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- A fan that will not start at all
- A whining or grinding extract motor
- An old fan that needs replacing
What a clean won’t put right
It’s worth knowing the limits before booking:
- Gas interlock faults that a Gas Safe registered engineer must deal with
- Grease throughout the ductwork, which needs a full TR19 clean
- Problems with the electrical supply to the fan (an electrician’s job)
Not sure which it is? You can ring 0345 646 2711 or email us and we will tell you honestly before booking.
What we work on in Arreton
- Roof and wall fans
- Kitchen extract fans
- Belts and pulleys
- Fan housings
- Fan motors
- Bearings
Extract fan repair in Arreton, done properly
The extract fan is what pulls smoke, heat and steam out of the kitchen. When it starts to rattle, hum or slow down, the cooking area soon fills with heat and fumes. Our engineers track down the fault and fix it with a repair or a replacement. Common call-outs are for an overheating extract motor and a worn or slipping fan belt, on belts and pulleys, kitchen extract fans and roof and wall fans.
In a small place like Arreton, fans are often on an outside wall or roof, open to wind and rain. Weather and grease together wear out motors and bearings.
The report is your system’s health record: a dated account with pictures of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.

- Place
- Arreton (PO30)
- Wider area
- Isle of Wight
- Reporting
- Report and photos after the visit
- Price
- A fixed price before we start
- Working hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
What staff can safely do
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks helps show that the system is managed between specialist visits, alongside our reports.
How the job changes from site to site
Belt-driven fans
With belts and pulleys, there’s more to wear. More parts to inspect, but many faults are straightforward to fix.
Impellers and housings
The impeller does the work of moving air through the system. Grease deposits unbalance it and cause vibration.
Questions from Arreton
Can you work in Arreton outside opening hours?
Yes, out-of-hours work is a big part of what we do. The site is handed back ready to open. When you ring 0345 646 2711 or send us an email, mention when the site is quiet.
Do you cover smaller places like Arreton?
Yes, we work in villages as well as towns, and Arreton is covered. Let us know about access, parking and anything unusual about getting there when you book.
Can you tell me the price of a fan repair?
We can’t price it without knowing the fault. After we have checked the fan, we give you a fixed price for the repair or the replacement.
Do you offer emergency callouts?
Yes. Our emergency line runs 24/7, for problems that cannot wait. Call us any time and explain what’s happened.
What about areas you can’t get to?
We record them on the report, with a note of where it is, and we tell you what would make it reachable, such as extra access panels in ductwork.
What causes a noisy extract fan?
An unbalanced, greasy impeller vibrates and that’s one of the most common reasons. Bearings, belts and mountings can also be to blame.
Can we book visits on a schedule?
Yes. Scheduled maintenance plans are part of what we do, with visits at the interval your system needs. The report from each visit recommends the next date.
What happens to the waste?
Anything we remove is contained as we work and taken away with us, including grease, debris and dirty water. We don’t leave it behind.
What we are called out for in Arreton
Some faults are in the controls rather than the fan. A failed speed controller or a wiring fault can stop a fan so we check the controls before blaming the motor.
Most sites get in touch after spotting one of these:
- An extract fan that rattles or knocks
- A fan running too slowly to clear the kitchen
- A fan that keeps cutting out
- A fan that will not start at all
Kitchens in Arreton can call our 24/7 emergency line whenever an extract fan stops.
Questions to ask before you book
- Whether a written report and pictures are included
- Whether inaccessible sections are listed on the report
- Proof of accreditation you can verify
- Whether the work can be done while the site is closed
What affects the cost of extract fan repair
Every site gets its own quote. This is what makes a difference:
- The times the site is available
- A single visit or a regular plan
- How many systems or sites are involved
- Where the site is and how we reach it
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. The price is fixed before any work starts.
What to send for a quote
Before you ask for a quote, gather:
- Any previous report or certificate
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Photos showing the whole system and its surroundings
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, the quote is fixed before any work is booked.
What else we do in Arreton
What we do, step by step
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Afterwards, the area is left tidy and the written report follows. The timing of a visit to Arreton is set by you, and the travel is our side of the planning.
- We start with the symptoms, such as rattling, humming, slow running or a fan that will not start.
- Power to the fan is isolated before we open the housing.
- We check the motor, bearings, drive, impeller and mountings.
- You get our diagnosis and a fixed quote to repair or replace.
- Once the work is done, we run the fan and check it’s steady and quiet.
Preparing for the visit
- Let us know about permits to work or site inductions
- Arrange a key holder or contact on site
- Mention any parking or loading restrictions
How to get a quote
Want a quote for extract fan repair? Please phone us on 0345 646 2711 or email us and tell us about the site. We will explain what we’d do and send a fixed quote before you commit to anything.
Advice
Extract fan repair in Arreton: local notes
Look up Arreton on the FSA’s food hygiene register and you’ll find about 4 cafés, restaurants and staff canteens in Arreton and the streets around it, up to about 1.5 miles out. Every one of them that cooks under a canopy depends on its extract fan to keep cooking. Kitchens in Arreton get their food hygiene inspections from Isle of Wight council. Food hygiene rules expect food premises to have suitable and sufficient ventilation. Getting the fan running again is the priority.
A fan that rarely runs, like one in a hall kitchen near St. George's Church or elsewhere in Arreton, can seize between uses.
Arreton is about 3 miles south-east of Newport, in the Isle of Wight. We carry out extract fan repair for commercial premises of every kind in Arreton and the rest of the Isle of Wight. Arreton is one of 125 places in the Isle of Wight where we work for extract fan repair. Our Portsmouth page covers sites nearby (12 miles or so).
Our technicians cover all of PO30 for extract fan repair and the roads nearby. Local streets include Cherrywood View, Hopkins Walk and Hazely Combe, all of which we cover for extract fan repair. We also cover Merstone (1 mile south-west), Downend (1 mile north), Hale Common (1 mile south), Newchurch (1 mile south-east) and Branstone (2 miles south-east). Larger places within reach include Newport (3 miles north-west), Ryde (5 miles north-east), Cowes (7 miles north-west), Sandown (4 miles east), Shanklin (4 miles south-east) and Ventnor (5 miles south). Remote and island sites need a little more planning, so tell us where you are when you ask for a quote for extract fan repair.
Around Arreton
Typical jobs here are in premises near The White Lion pub, among other places. For rail, the closest station is Sandown station, roughly 3.4 miles east. A little further out are Museum of Country And Agriculture (0.5 miles south-east) and Carisbrooke Castle (3.5 miles west). For a walk, there’s Alverstone Mead and Brading Down.
Multi-site and managed buildings
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. Where responsibility is shared, records matter even more.
We regularly work with managing agents. Tell us the site, the work and the access arrangements, and we will send a fixed quote.