Oxfordshire · Extract fan cleaning
Stanton St John extract fan cleaning
Extract fan cleaning for Stanton St John, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- Burning smells from the fan area
- Grease stains around the discharge
- A heavily greased fan housing
What extract fan cleaning can’t fix
We will always give you a straight diagnosis, so here’s what this work can’t put right:
- An impeller that is bent or split
- A dirty duct upstream of the fan
- A fan that won’t start
Not sure which it is? You can give us a ring on 0345 646 2711 or use the quote form and we’ll tell you honestly.
What we work on in Stanton St John
- In-line fans
- Roof-mounted fans
- Centrifugal fans
- Fan housings
- Axial fans
- Discharge points
How we handle extract fan cleaning in Stanton St John
A fan never collects grease in a neat, even layer. Heavier deposits on some blades throw the impeller off balance, which brings vibration, noise and extra wear on the bearings and motor. Cleaning the impeller and housing puts that right. Typical jobs include a noisy fan that has got louder over time and grease around the motor and its mounts, on roof-mounted fans, centrifugal fans and fan housings.
Work in a small place like Stanton St John starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
We’ve been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Where
- Stanton St John (OX33)
- Wider area
- Oxfordshire
- Paperwork
- TR19® certificate and photo report
- Quote
- A fixed price before we start
- When we work
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Towns and villages near Stanton St John
Also in Stanton St John
Stanton St John: your questions answered
Which council inspects kitchens in Stanton St John?
In Stanton St John, it’s South Oxfordshire council that carries out food hygiene inspections. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Which fire service covers Stanton St John?
Fire safety enforcement in Stanton St John is handled by Oxfordshire Fire and Rescue Service. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
What is TR19?
A BESA specification, with two parts that matter most here: TR19® Grease for kitchen extracts and TR19® Air for supply and extract systems. It isn’t legislation, but it’s the standard people check against.
Is TR19 a legal requirement?
No. TR19® itself isn’t law; it’s a BESA specification. The legal duty comes from the Regulatory Reform (Fire Safety) Order 2005: the responsible person must assess and reduce fire risk, and TR19® is the benchmark for showing that grease in the extract is under control.
Are you fully insured?
Yes. Full insurance covers our work and have been trading since 2009.
Which kinds of sites do you work on?
Any commercial site with kitchens or ventilation, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
Are you accredited?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We’re fully insured and have been trading since 2009.
Is the fan included in a TR19 clean?
Yes. A TR19 Grease clean covers everything from canopy to discharge, and the fan sits right in that path, so it’s cleaned too.
For landlords and multi-site operators
From a single site to a large estate, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with photos.
If you look after several sites, we can plan visits across the whole estate and price them together. Each site gets its own report and photos, so each one has its own record.
Why act early in Stanton St John
Vibration from an unbalanced impeller doesn’t stay small. It wears bearings and mounts and can lead to a breakdown and a kitchen can’t cook safely without extraction. A planned clean beats an emergency. Rural sites cannot always move to another kitchen or room when something fails.
Whatever the type of site, the quote works the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll go through it with you.
Why Stanton St John businesses choose us
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- One number for every site across the South East and London
- A fixed price before any work starts
- CHAS and SafeContractor accredited, with ISO 9001
See our cost guide and how to check a contractor.
Kitchen extracts in Stanton St John
Food hygiene inspections in Stanton St John are the job of South Oxfordshire council’s environmental health team. Extraction counts as kitchen equipment, so its condition can come up on the day. Our report lists what was cleaned and when, which is useful to have ready. At about 50 miles from central London, Stanton St John sits well inside the area we cover. The visit is fixed around your opening hours, not ours.
Bursars and site managers at schools such as Wheatley Park School tend to book extract cleaning for when the kitchen is empty. Volunteers running a hall kitchen near Church of St John the Baptist, or anywhere in Stanton St John, may not know when the extract was last cleaned, and a grease test settles it. If your kitchen is in a listed or historic building, like the houses around Stanton St John (Holywell Manor is about 4 miles south-west), fitting access panels needs care.
Stanton St John is about 4 miles north-east of Oxford, in Oxfordshire. For extract fan cleaning in and around Stanton St John, please call us on 0345 646 2711, or send details by email for a fixed quote. We work across South East England and London, Stanton St John included. Across Oxfordshire, we cover 443 places, Stanton St John among them.
All of OX33 is covered for extract fan cleaning, from the main roads to the quietest streets. Local streets include Mill Street, Church Close and Cox Lane, all of which we cover for extract fan cleaning. Close by, we work in Forest Hill (1 mile south), Beckley (1 mile north-west), Barton (2 miles south-west), Risinghurst (2 miles south-west) and Holton (2 miles south-east). Further out, we also cover Oxford (4 miles south-west), Didcot (12 miles south), Bicester (8 miles north), Abingdon-on-Thames (9 miles south-west), Witney (14 miles west) and Thame (9 miles east).
Near you in Stanton St John
Locally, jobs take us to businesses close to Katie and George Park and The Star Inn Public House and the streets around them. Stanton St John’s nearest station is Islip station, about 4.5 miles north-west. Other landmarks nearby include Oxford Castle (4.7 miles south-west) and Churchill Hospital (2.7 miles south-west). For a walk, there’s Shotover and Bernwood Meadows.
What we do, step by step
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Afterwards, the area is left tidy and the written report follows. If you can send pictures, we can arrive in Stanton St John knowing what to expect.
- Diagnosis first: we look for grease, noise and vibration.
- With the fan isolated, the housing is opened.
- The impeller is cleaned blade by blade so it runs balanced.
- We clean the casing, the outlet and around the motor.
- The fan goes back into service with a report on its condition.
How to prepare
- Clear the space around the work
- Let us know when the site is closed or quiet
- Mention any parking or loading restrictions
Get a fixed quote
Getting a quote does not take long. Call or email with a few details and you’ll normally have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Read more
How we price extract fan cleaning
We quote each job individually. This is what makes a difference:
- A single visit or a regular plan
- The times the site is available
- Where the site is and how we reach it
- The number of sites or systems
What you pay reflects the actual work. That is why we survey first, from photos or on site, and why the quote is fixed before work begins.
What to send for a quote
The more you tell us, the more accurate the quote. With your enquiry, please include:
- The site address and the type of premises
- Detail shots of panels, filters and grilles
- The roof, plant room or outside wall the system runs to
- Problems your staff have spotted
Every quote begins with a look at the system, from your photos and details or, where that is not enough, a survey on site. Then we send a fixed price, before we start.
What the work involves, part by part
Inline duct fans
Some fans are built into the duct itself. We get to them through the duct or casing after isolating them.
Fan housings and motors
Inside the casing, grease is thrown onto the walls. It’s scraped and degreased with the impeller.
Staff cleaning versus specialist work
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.