Kent · Extract fan cleaning
Extract Fan Cleaning in Cliffs End
Cleaning of kitchen extract fans, impellers, fan housings and discharge points for Cliffs End, with a survey first and a report with photos at the end. Ask us for a fixed quote.
- Grease around the motor and its mounts
- An extract fan with no cleaning record
- Weak extraction at the canopy
Extract fan cleaning in Cliffs End, done properly
A fan never collects grease in a neat, even layer. Heavier deposits on some blades throw the impeller off balance, which brings vibration, noise and extra wear on the bearings and motor. Cleaning the impeller and housing puts that right. The work covers in-line fans, roof-mounted fans and discharge points, and the jobs we see most are a fan motor running hot under a coat of grease and a fan that no longer moves enough air.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Location
- Cliffs End (CT12)
- Region
- Kent
- Paperwork
- Certificate plus before-and-after pictures
- Quotes
- A fixed quote up front
- When we work
- Nights, weekends or holidays to suit you
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
Part by part
Impellers and blades
Grease on the leading edges of the blades cuts the fan’s efficiency. Scraping and degreasing them restores their shape, so the fan can run as intended.
Kitchens with long cooking hours
When a busy kitchen’s fan fails, cooking stops. A clean fan is less likely to strain, and our 24/7 emergency callout is there if it happens anyway.
What affects the quote in Cliffs End
You’ll get a fixed price before any work starts. It’s based on:
- One-off work versus a regular cycle
- Parking and loading at the site
- The number of sites or systems
- Access, including roofs, risers and ceiling voids
Whatever the type of site, the quote works the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.
Helping us quote
To help us quote quickly, send us:
- The roof, plant room or outside wall the system runs to
- Detail shots of panels, filters and grilles
- Wide photos of the system and the area around it
- The times we could work without disrupting the site
For extract fan cleaning in Cliffs End, phone us on 0345 646 2711 or drop us a line. Let us know the site type and the opening hours, and send pictures or your last report if you can. We normally send a fixed quote within one working day.
Aftercare tips
To keep the system working properly between visits:
- Watch for grease marks around the outlet
- Keep the grease filters clean and in place
- Keep the fan on whenever the range is lit
- Note any drop in extraction at the canopy
Once it’s clean, the fan is closed up and run to check it’s working smoothly. If anything seems wrong, from vibration to wear, we note it, so you can plan any repair.
Make sure the fan is reachable. Clear access means it’s never left out of a clean, whether it’s on a roof, in a ceiling or on a wall.
In-house cleaning or a specialist?
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. That is our job.
When your team notices a problem between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We can diagnose it and quote.
Kitchen extracts in Cliffs End
Sea air reaches Cliffs End, which sits within about 1 mile of the coast. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. Food Standards Agency records list about 6 cafés, restaurants and staff canteens and about 5 takeaways and sandwich shops within roughly a mile and a half of the centre of Cliffs End. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Cliffs End sits within the area of Kent Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
If you run a café or takeaway near Thanet Parkway station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits. Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Cliffs End is Ramsgate General Hospital, about 1.9 miles east.
Cliffs End is about 2 miles west of Ramsgate, in Kent. Anywhere in CT12, we can take on extract fan cleaning. Cliffs End is one of 922 places in Kent we cover for commercial clients. We also work in Maidstone, around 37 miles away.
All of CT12 is within our area for extract fan cleaning, from the main roads to the quietest streets. Whether your site is on Foads Lane, Moyes Close and Delacourt Close or a nearby road, our technicians can take on the work. Other places close to Cliffs End include Sevenscore (1 mile west), Chilton (1 mile east), Pegwell (1 mile east), Manston (1 mile north) and Ebbsfleet (1 mile south-west). Within a short drive, we also cover Canterbury (13 miles west), Margate (4 miles north), Dover (14 miles south), Broadstairs (4 miles north-east), Whitstable (15 miles west) and Deal (8 miles south).
Around Cliffs End
We work in commercial kitchens and buildings around The Sportsman pub, Chatham House Grammar School and Sandwich and Pegwell Bay, among other places. There’s a railway station in Cliffs End itself: Thanet Parkway station. Other landmarks nearby include RAF Manston History Museum (1.6 miles north-west) and Westwood Cross (2.4 miles north-east). The countryside around Cliffs End includes Sandwich and Pegwell Bay.
Common problems we fix in Cliffs End
A fan collects more grease when the filters let more through. Missing, damaged or badly fitted filters let grease travel the whole system, so the fan takes far more than it should.
Any of these means the system needs a check-up:
- A noisy fan that has got louder over time
- A motor area thick with grease
- Grease stains around the discharge
- A fan left out of previous cleans
Term dates shape school work: for a school like Chilton Primary School, an extract clean fits neatly into a half-term or summer break.
What to look for in a quote
- What happens if part of the system can’t be accessed
- When they can work, and whether that’s outside your opening hours
- Whether they recommend a next date
- Whether they’re fully insured
Landlords, agents and facilities managers
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept on a regular cycle.
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side and send the paperwork to whoever needs it.
Cliffs End questions
Can sea air affect extract fan cleaning in Cliffs End?
It can. Being within about 1 mile of the sea means more corrosion on metalwork in Cliffs End than inland. Outdoor metalwork near the sea is worth inspecting at every visit.
Do you cover smaller places like Cliffs End?
Yes. Cliffs End is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
Do you look at the system first?
Yes, every time. We diagnose before we treat: the survey shows what needs doing and what access we need, and the quote is based on that.
What do you need from me for a quote?
Where the site is, what it is and when it’s open, plus pictures of the system and your last certificate or report if you have one.
Is TR19 cleaning required by law?
No. The law sets the duty, and TR19® is the recognised benchmark for meeting it. Under the Fire Safety Order 2005, the responsible person must reduce fire risk, and without records, many insurers may refuse or reduce a claim.
Can the fan be cleaned between full cleans?
Yes, we can clean just the fan. That helps when the fan needs attention before the next full clean, but it doesn’t replace a full TR19 clean.
What accreditations do you have?
CHAS, SafeContractor, ISO 9001 and BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. We have been trading since 2009 and we’re fully insured.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before we start, and anything we remove is contained. Before we leave, we tidy up and clean down.
What happens on the day
Protection comes first: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. The work on site takes an hour or two for most single fans, and the area is cleaned down before we leave. The timing of a visit to Cliffs End is set by you, and the travel is our side of the planning.
- Diagnosis first: we look for grease, noise and vibration.
- With the fan isolated, the housing is opened.
- The impeller is cleaned blade by blade so it runs balanced.
- We clean the casing, the outlet and around the motor.
- The fan goes back into service with a report on its condition.
Before we arrive
- Tell us where we can park and unload
- Move anything stored near the system
- Plan for cooking equipment or plant to be off before we arrive
Ask for a quote
To get a fixed quote, give us a ring on 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. A few pictures and your last certificate or report help a lot. We normally come back within one working day.