Oxfordshire · Extract fan cleaning
Extract fan cleaning in Chilton, Oxfordshire
One call covers cleaning of kitchen extract fans, impellers, fan housings and discharge points in Chilton, from survey to sign-off. CHAS and SafeContractor accredited, ISO 9001 and fully insured.
- A fan motor running hot under a coat of grease
- An extract fan that vibrates or rattles
- Burning smells from the fan area
About our extract fan cleaning in Chilton
Not all extract fans are the same: roof-mounted units, inline fans within the duct, and wall fans. Each is isolated and opened in its own way and the survey shows us how to reach it. If you are dealing with vibration from an unbalanced impeller and a fan left out of previous cleans, we can help, from axial fans, fan housings and in-line fans onwards.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. We agree access and timings in advance.
Accreditations are easy to claim and worth checking. Ours are BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease, plus CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Chilton (OX11)
- Wider area
- Oxfordshire
- Paperwork
- Certificate plus before-and-after pictures
- Quote
- A fixed price before any work starts
- Working hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
What extract fan cleaning looks like in Chilton
Food Standards Agency data counts about 5 cafés, restaurants and staff canteens in Chilton and the streets around it, up to about 1.5 miles out. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Chilton sits within the area of Oxfordshire Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. In Chilton, food businesses are inspected by environmental health officers from Vale of White Horse council. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Our report lists what was cleaned and when, which is useful to have ready.
If you look after a school kitchen, at a school such as Chilton County Primary School or anywhere near Chilton, the holidays are the usual time for a TR19® clean.
Chilton is about 4 miles south-west of Didcot, in Oxfordshire. For extract fan cleaning in and around Chilton, please call 0345 646 2711 or use the quote form for a fixed quote. Our area covers London and the South East, including Chilton. Across Oxfordshire, we cover 443 places, Chilton among them. There’s also a page for Oxford, roughly 13 miles from Chilton.
All of OX11 is within our area for extract fan cleaning, from busy streets to back roads. Local streets include Main Street, Lawson Lane and Crafts End, and we cover them all for extract fan cleaning. Close by, we work in Upton (2 miles north-east), West Hagbourne (2 miles north-east), Harwell (2 miles north), Coscote (2 miles north-east) and Blewbury (3 miles east). Within a short drive, we also cover Oxford (13 miles north), Didcot (4 miles north-east), Abingdon-on-Thames (8 miles north), Wantage (6 miles west), Grove (6 miles north-west) and Faringdon (14 miles north-west).
What’s near Chilton
Around Chilton, our work takes us to kitchens and buildings near Crown at Chilton pub, among other places. The closest station to Chilton is Didcot Parkway station, roughly 3.7 miles north-east of the centre. Other landmarks nearby include Atlas Computer Laboratory (1 mile north-west). Not far away are Mowbray Fields and Churn Hill.
What else we do in Chilton
Questions from Chilton
Can you work in Chilton outside opening hours?
Yes. We work evenings, overnight and at weekends. The work in Chilton can fit around your hours. Just ring 0345 646 2711 or email us with your opening times and we will plan around them.
Will you come out to Chilton?
Yes, we work in villages as well as towns, and Chilton is covered. Let us know about access, parking and anything unusual about getting there when you book.
What about areas you can’t get to?
They’re marked on the report. In ductwork, new access panels are often the answer, and we can fit those.
Is the fan included in a TR19 clean?
Yes, a full TR19 clean includes the fan. Anything that cannot be reached is recorded, so you always know what was cleaned.
Why is my extract fan noisy?
Build-up on the impeller is a frequent reason, because it unbalances the fan. Worn bearings and motor problems are others, which our report will flag.
What if the fan needs more than a clean?
Fan repair and replacement is part of what we do. If cleaning shows a worn motor, bearings or impeller, we will tell you and quote for the repair.
Will I get photos of the cleaned fan?
Every clean has a photo report, with anything we noticed. A full clean adds a TR19 certificate from the BESCA Vent Hygiene Elite portal.
Do you look at the system first?
Yes. For many sites, photos and a few details are enough, while bigger or harder-to-see systems are surveyed on site.
When it’s something else
We won’t sell you work that does not address the problem, so these are the things it will not cover:
- Grease in the canopy and ductwork
- A failed motor or worn bearings (that needs a fan repair or replacement)
- A fan that is too small for the system (a design question)
If you’re not sure, just call 0345 646 2711 or drop us a line and we will give you a straight answer.
What the work covers
- Axial fans
- Roof-mounted fans
- Discharge points
- In-line fans
- Centrifugal fans
- Fan housings
How the job changes from site to site
Wall fans
The wall around a wall fan can be stained with grease. The outlet is checked as well as the fan.
Inline duct fans
An inline fan can be easy to forget because it’s out of sight. We find it during the survey and include it in the clean.
Aftercare tips
Here’s the after-treatment advice, short and simple:
- Watch for grease marks around the outlet
- File the fan’s report with your other records
- Tell us if the extract feels weaker
- Don’t store items in front of the fan’s access point
When we’ve finished, the fan is reassembled and run. If anything seems wrong, from vibration to wear, we note it, so you can plan any repair.
The fan stays cleaner when less grease gets past the canopy. Clean, well-seated filters are the fan’s first protection, and replace any that are damaged.
What we do, step by step
Our technicians bring everything the work needs, including protection sheets, the right tools and access kit. All we need from you is clear access and the right equipment switched off. The visit takes a couple of hours per fan, depending on its size and the build-up. We agree a date with you, plan the drive to Chilton and turn up when the site is quiet.
- We start by checking where the fan sits and how to isolate it.
- The fan is isolated so it cannot start while we work.
- We remove the grease from the blades, impeller and casing.
- Blades, housing and the area around the motor are degreased with care.
- The fan is put back into service, checked and photographed.
Preparing for the visit
- Clear loose items from the work area
- Make sure equipment near the work can be switched off and left to cool
- Let us know about parking and loading
How to get a quote
Here’s what helps us quote: the address, the type of site and when it’s open, photos of the system and any previous report or certificate. Then call us on 0345 646 2711, or send details by email.
Read more
What staff can safely do
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. Reaching it takes a specialist with the right equipment.
When your team notices a problem between visits, such as dripping grease, a noisy fan, a smell or a filter that will not come clean, they should report it rather than try to fix it. We will take a look and send you a fixed quote.
Managing agents and facilities teams in Chilton
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
Do you need extract fan cleaning in Chilton?
How fast a fan gets greasy in Chilton depends on the cooking: how many hours a day the kitchen runs and what it cooks. Under BESA guidance, the whole system, fan included, needs cleaning at least every 3, 6 or 12 months depending on daily hours.
Clients normally contact us after spotting one of these:
- A fan that hums, whines or rumbles
- Thick grease on the impeller and casing
- Weak extraction at the canopy
- An extract fan with no cleaning record
Church and community hall kitchens, near Church of All Saints or anywhere around Chilton, are easy to forget, but their extracts collect grease like any other.
What to look for in a quote
- When they can work, and whether that’s outside your opening hours
- Which accreditations they hold, and whether you can check them
- When the next visit should be, and why
- Proof of insurance