Oxfordshire · Ductwork cleaning
Ductwork cleaning in Chilton, Oxfordshire
We cover Chilton for ductwork cleaning. Out-of-hours visits, a fixed quote and a written report with pictures on every job.
- Grease leaking from duct joints
- Smells of old cooking grease from the ductwork
- An insurer asking for TR19 evidence
Managing agents and facilities teams in Chilton
When the building owner and the occupier are different, the lease normally sets out who maintains what. We’re happy to deal with either side, and the report can go to both.
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Ductwork cleaning in Chilton, done properly
Between the canopy and the fan runs the ductwork, hidden above ceilings and inside walls. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. We clean it from the inside, through access panels, to BESA TR19® Grease. If you are dealing with a grease test showing the duct is overdue and thick crusts of old grease along the duct, we can put it right.
In a small place like Chilton, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
The sign-off is always in writing: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. It shows what was done and what, if anything, couldn’t be reached.
- Place
- Chilton (OX11)
- Wider area
- Oxfordshire
- Reporting
- TR19® certificate and photo report
- Quote
- A fixed quote up front
- Hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Updated
- 30 October 2026
Signs you need ductwork cleaning in Chilton
Many ducts do not have enough access panels. Sections between panels go uncleaned, sometimes since the system was installed, and the grease there keeps building out of sight.
Keep an eye out for these warning signs:
- A duct clean needed for an insurer
- A rancid smell from the extract duct
- Fat dripping from the ductwork
- Heavy grease at the base of a riser
Church and community hall kitchens, near Church of All Saints or anywhere around Chilton, are easy to forget, but their extracts collect grease like any other.
Before booking anyone
- When the next visit should be, and why
- How areas they can’t reach will be recorded
- What records you’ll receive afterwards
- Proof of accreditation you can verify
What happens on the day
Your trading hours come first. Most visits are booked for when the area is out of use, such as evenings, overnight, early mornings or weekends. When the team arrives, the work area is protected and the relevant equipment is switched off to cool, and the work takes a shift or more, depending on the length of the runs and the number of access points. Photos of the system and how to reach it help us plan a visit to Chilton.
- The duct route is surveyed and every access point found.
- Grease thickness is measured at set points.
- Once the kitchen has closed, we protect the area and open the panels.
- Heavy deposits come out by hand, then each section is degreased.
- Panels are closed, readings and photos repeated, and unreachable sections recorded.
Before we arrive
- Tell us about site rules, permits or sign-in
- Make sure equipment near the work can be switched off and left to cool
- Name a contact who can let us in at the agreed time
Get a fixed quote
For a fixed quote, call us on 0345 646 2711 or drop us a line with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Advice
Grease, kitchens and Chilton
There are about 5 cafés, restaurants and staff canteens in and around Chilton, up to about a mile and a half out, according to the Food Standards Agency’s register. Behind every canopy among them is a run of ductwork that collects grease out of sight. The fire and rescue service for Chilton is Oxfordshire Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract. In Chilton, food businesses are inspected by environmental health officers from Vale of White Horse council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready.
Bursars and site managers at schools such as Chilton County Primary School tend to book extract cleaning for when the kitchen is empty.
Chilton is about 4 miles south-west of Didcot, in Oxfordshire. From the centre of Chilton to the outskirts, ductwork cleaning is available to all kinds of commercial premises, from a single unit to a large public building. Chilton is one of 443 places in Oxfordshire where we work for commercial clients. Oxford is in our area too, about 13 miles from Chilton.
Here we cover the OX11 postcode area for ductwork cleaning. If you need ductwork cleaning at premises on Main Street, Lawson Lane and Crafts End or a nearby road, we can help. Nearby, we also carry out ductwork cleaning in Upton (2 miles north-east), West Hagbourne (2 miles north-east), Harwell (2 miles north), Coscote (2 miles north-east) and Blewbury (3 miles east). We also work in nearby towns such as Oxford (13 miles north), Didcot (4 miles north-east), Abingdon-on-Thames (8 miles north), Wantage (6 miles west), Grove (6 miles north-west) and Faringdon (14 miles north-west).
Local landmarks in Chilton
Typical jobs here are in premises near Crown at Chilton pub, among other places. For rail, the closest station is Didcot Parkway station, about 3.7 miles north-east. A little further out are Atlas Computer Laboratory (1 mile north-west). Open spaces near Chilton include Mowbray Fields and Churn Hill.
Different parts, different methods
Bends and transitions
Bends, elbows and changes of size are where grease collects most. The air slows and drops its load, so these points get extra attention.
Attenuators and discharge
Near the discharge, the air has cooled the most, so it can collect more grease than expected. We include it in the clean and the readings.
Between visits
Once we have finished, these simple steps help:
- Make sure filters are seated properly
- Keep the fan on while anything is cooking
- Diarise the next duct clean
- Have the grease measured if cooking hours go up
The report gives a recommended next clean date, based on the readings and your daily cooking hours, in line with BESA guidance.
Extra access panels mean more of the duct gets cleaned each time. It doesn’t stop grease forming, but it stops it building unseen.
What else we do in Chilton
Honest limits
To be straight with you, some problems need a different fix:
- Faulty fire dampers
- A failed fan motor at the end of the duct (a fan repair job)
- Parts of the duct with no way in
If in doubt, ring 0345 646 2711, or email photos and we’ll say what we think before you book.
What the work covers
- Vertical risers
- Multi-storey ducts
- Horizontal duct runs
- Access panels
- Attenuators
- Bends and junctions
FAQs for Chilton
Do you cover smaller places like Chilton?
Yes, we work in villages as well as towns, and Chilton is covered. Let us know about access, parking and anything unusual about getting there when you book.
Who is the fire and rescue service for Chilton?
Fire safety enforcement in Chilton is handled by Oxfordshire Fire and Rescue Service. Records of extract cleaning are a sensible thing to have ready if a fire safety officer carries out an audit.
Can you clean ductwork with no access panels?
We clean everything we can reach and record what we cannot. Fitting extra access panels is the usual answer, and we can do that for you.
Do you have insurance?
Yes. We are fully insured, and we can share the details when you need them.
Which kinds of sites do you work on?
Restaurants and pubs, hotels, schools and colleges, hospitals and care homes, offices and retail, as well as food production and leisure sites.
Do we have to stop cooking while the ducts are cleaned?
Only while we’re working, and we work around you. Overnight and weekend work is common, so no service is lost.
How often should kitchen ducts be cleaned?
It depends mostly on daily cooking hours. Kitchens cooking 12 to 16 hours a day need it at least every 3 months, while lighter use can go longer.
What information do you need?
Just the basics: the address, the site type, your opening hours and how we reach the system. Photos and any previous paperwork make it quicker. After that, simply call 0345 646 2711 or use the quote form.
What staff can safely do
For ventilation and air handling systems, in-house care is mostly about checks: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. Inside the ducts, risers and fan is specialist work, which is where we come in.