Kent · Extract fan cleaning
Extract fan cleaning in Breach, Kent
Extract fan cleaning for commercial sites in Breach and across Kent. BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease.
- A motor area thick with grease
- A fan that has never been cleaned
- Rough running from the extract fan
Extract fan cleaning in Breach
Not all extract fans are the same: roof-mounted units, inline fans within the duct, and wall fans. The way in depends on the type and the survey shows us how to reach it. If you’re dealing with a fan that no longer moves enough air and grease escaping from the fan outlet, we can put it right, from roof-mounted fans, discharge points and axial fans onwards.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. We agree access and timings in advance.
The sign-off is always in writing: a dated report with photos of the work, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Place
- Breach (ME9)
- Region
- Kent
- Paperwork
- TR19® certificate and photo report
- Price
- A fixed price before work begins
- Working hours
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Extract fan cleaning in Breach: the local picture
At about 3 miles from the coast, Breach is close enough for sea air to matter. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. Food Standards Agency records list about 5 restaurants, cafés and works canteens and about 4 takeaways and sandwich shops in and around Breach, up to about a mile and a half out. Where they cook under a canopy, an extract fan is pulling grease-laden air through its blades every service. Fire safety in Breach falls to Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
If you run a café or takeaway near Newington station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits. Term dates shape school work: for a school like Newington Church of England Primary School, an extract clean fits neatly into a half-term or summer break.
Breach is about 3 miles east of Gillingham, in Kent. Across the ME9 area, we can take on extract fan cleaning. 922 places in Kent are on our list, from busy centres to quieter spots. Our Maidstone page covers sites nearby (9 miles or so).
Extract fan cleaning in ME9 follows the same survey, fixed quote and written report as everywhere else we cover. Neighbouring places we cover for extract fan cleaning include Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). Further out, we also cover Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west), Faversham (11 miles east), Northfleet (14 miles west) and Minster (8 miles north-east).
Landmarks near Breach
We work in commercial kitchens and buildings around Berengrave Chalk Pit, The Wheatsheaf pub and Leigh Academy Rainham. The nearest railway station is Newington station, roughly 0.8 miles south-east of the centre. Other landmarks nearby include Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). For a walk, there’s Bishop Saltings.
What happens on the day
At the end of the visit, someone from your team can look over the work with us. Anything we couldn’t reach or that needs attention is pointed out there and then, and it goes on the report too. All told, the work takes a few hours where there are several fans or heavy deposits. A quick note on how to find the site and where to park makes a visit to Breach run smoothly.
- First we locate the fan and agree how it’s safely isolated.
- With the fan isolated, the housing is opened.
- The impeller and the housing around it are scraped clean.
- We degrease the fan and housing, taking care around the motor.
- It’s closed up, run and checked, and pictures go into your report.
Preparing for the visit
- Move anything stored near the system
- Tell us where we can park and unload
- Mention any sign-in, permit or induction we need
Getting a quote
Getting a quote doesn’t take long. Send a few details and photos, and we typically reply with a fixed quote within one working day. Where a survey is needed, we arrange a time that suits the site.
Read more
Managing agents and facilities teams in Breach
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
Keeping records across a portfolio is half the battle. Each visit produces a dated report with photos, so you can show an insurer or inspector what was done at each site.
How the job changes from site to site
Inline duct fans
Space around an inline fan can be tight, so we plan how to reach and clean them. Anything out of reach is recorded.
Impellers and blades
The impeller is the spinning part that moves the air, and grease builds up on them unevenly. An uneven coating throws it off balance, so it’s cleaned carefully blade by blade.
Places near Breach
What else we do in Breach
What a clean will not put right
Some problems need a different service or another trade:
- Damaged fan blades
- Electrical faults in the fan’s supply or controls (an electrician’s job)
- Grease in the duct and canopy before the fan (those need a full TR19 clean)
If in doubt, call us on 0345 646 2711, or email photos and we will say what we think before you book.
Parts of the system we cover
- Centrifugal fans
- Roof-mounted fans
- Axial fans
- Discharge points
- In-line fans
- Fan housings
Common questions in Breach
Does coastal air change anything about extract fan cleaning in Breach?
It can. Breach is within about 3 miles of the coast, and salt air speeds up corrosion. We look at fans, cowls and fixings for rust as well as grease.
Can a school canteen extract in Breach be done out of term time?
Yes. The holidays are the usual time for school work. Around Breach, the Food Standards Agency lists about 5 schools and colleges with registered kitchens within a mile and a half or so. You can call us on 0345 646 2711 or use the quote form with the dates the site is empty.
What should I send you?
Where the site is, what it is and when it’s open, along with a few pictures and any previous report.
How often does the fan need cleaning?
It depends on how many hours the kitchen cooks, under BESA guidance. Heavy use means at least every 3 months, light use at least every 12, fan included.
Do you have a 24/7 line?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
Which accreditations do you hold?
Our accreditations are CHAS, SafeContractor and ISO 9001, alongside BESCA Vent Hygiene Elite membership, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
How do you keep the site clean during the work?
We cover floors and nearby surfaces with sheeting before any work starts, and anything we remove is contained. At the end, the area is cleaned down.
How long does extract fan cleaning take?
That depends on the fan’s size, its position and how much grease there is. Typically it takes an hour or two for most single fans.
Keeping the system healthy
After the visit, a few habits help the work last:
- Notice when the fan starts to sound different
- Run the extract throughout cooking
- Keep access to the fan clear
- Keep records of every fan clean
We take away the grease and dirty water from the fan clean. On a roof or outside wall, we leave the surrounding area tidy.
A change in how the fan sounds is worth noting. New noise or vibration often means grease is building on the impeller, and catching it early keeps it a cleaning job.
Signs you need extract fan cleaning in Breach
The cooler the air, the more grease drops out, and a fan out on a roof or wall often sits where the air is coolest. That makes it a natural place for grease to settle.
Clients typically contact us when they notice something like this:
- A fan left out of previous cleans
- Thick grease on the impeller and casing
- Grease stains around the discharge
- A noisy fan that has got louder over time
Volunteers running a hall kitchen near Church of St Mary, or anywhere in Breach, may not know when the extract was last cleaned, and a grease test settles it.
Comparing quotes
- What paperwork you get at the end
- Which accreditations they hold, and whether you can check them
- When the next visit should be, and why
- What’s included in the scope, part by part
How we price extract fan cleaning
A fixed price needs a few facts first. We look at:
- Whether it’s a one-off visit or part of a schedule
- How big the system is
- Any permits to work or inductions
- What state the system is in
What you pay depends on how big the system is, the condition it’s in and access to every part of it. You get a fixed price before we start, so you know where you stand.
What to send for a quote
Photos and a few facts are often enough to price the work. Useful things to send:
- Close-ups of filters, grilles, hatches or access panels
- The roof, plant room or outside wall the system runs to
- Photos showing the whole system and its surroundings
- The site address and the type of premises
Every quote begins with a look at the system, either from photos and details you send or from a site visit. Then we send a fixed price, before any work starts.