Kent · Extract fan repair and replacement

Extract fan repair and replacement in Breach, Kent

Extract fan repair for Breach, from a team that has been trading since 2009. Out-of-hours visits and 24/7 emergency callout.

  • A knocking noise from the extract fan
  • A worn or slipping fan belt
  • Weak extraction and a smoky kitchen

Book extract fan repair in Breach

About our extract fan repair in Breach

Every fan job begins with finding the fault. Noise can come from grease on the impeller, worn bearings or a slipping belt, while a fan that won’t start may have a motor or control fault. You hear what we have found before any work goes ahead. We are often asked to deal with an extract that vibrates through the ductwork and a fan rattling in its housing, across bearings, fan motors and fan housings.

Somewhere as small as Breach, a kitchen extract fan might serve a pub, a school, a care home or a hall kitchen. When one fails, the cooking stops, and our 24/7 emergency line covers rural addresses too.

Think of the report as the system’s health record: a dated account with pictures of everything we did. Grease extract cleans are also certificated to TR19® Grease through the BESCA VHE portal, ready for your insurer.

Where
Breach (ME9)
Region
Kent
Records
Written report with photos
Price
Fixed quote, usually within a working day
When we work
After hours by arrangement; emergencies any time
Telephone
0345 646 2711
Last updated
30 October 2026
The Duct Doctor team standing beside their branded white and blue vans

When something else is needed

A few issues sit outside what this work can do:

  • Smells from the discharge that need odour control equipment
  • A system that needs redesigning rather than repairing
  • Gas interlock faults that a Gas Safe registered engineer must deal with

If you’re not sure, just call us on 0345 646 2711 or email us and we’ll give you a straight answer.

What we work on in Breach

  • Kitchen extract fans
  • Fan housings
  • Bearings
  • Fan motors
  • Roof and wall fans
  • Belts and pulleys

Landlords, agents and facilities managers

Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we can quote for the whole system.

For anyone managing more than one site, we can schedule visits across all of them on one quote. Every building has its own written report, so each one has its own record.

Extract fans in Breach

Breach is within about 3 miles of the coast. Motor mounts, bolts and housings on outdoor fans corrode faster close to the coast. Food Standards Agency records list about 5 restaurants, cafés and works canteens and about 4 takeaways and sandwich shops in Breach and the streets around it, up to about 1.5 miles out. For any of them with a canopy, the extract fan is what keeps the kitchen usable. It’s Swale council that sends environmental health officers to food businesses in Breach. Under food hygiene rules, a kitchen needs suitable and sufficient ventilation. That makes a fan repair urgent rather than something to put off.

School kitchens cannot easily serve lunch without extraction, so if you look after one at a school like Newington Church of England Primary School, fix a failing fan before term starts. If you run a church or community hall kitchen, near Church of St Mary or elsewhere in Breach, an extract fan that rarely runs can seize or fail when it’s needed.

Breach is about 3 miles east of Gillingham, in Kent. Across the ME9 area, we can carry out extract fan repair at your premises. 922 places in Kent are on our list, from busy centres to quieter spots. Our Maidstone page covers sites nearby (9 miles or so).

We cover every part of ME9 for extract fan repair and the roads nearby. If your site is just outside Breach, we cover Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). We also work in nearby towns such as Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west), Faversham (11 miles east), Northfleet (14 miles west) and Minster (8 miles north-east).

Local landmarks in Breach

Around Breach, our work takes us to kitchens and buildings near Berengrave Chalk Pit, The Wheatsheaf pub and Leigh Academy Rainham. The closest station to Breach is Newington station, about 0.8 miles south-east of the centre. Nearby you’ll also find Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). Green spaces nearby include Bishop Saltings.

Map of Breach © OpenStreetMap contributors

Aftercare tips

Once we have finished, these simple steps help:

  • Keep all filters fitted while cooking
  • Note when the fan trips or cuts out
  • Make sure the isolator and controls are easy to reach
  • Avoid lowering the speed to quieten a fault

Listen to the fan over the next few weeks. A new noise or vibration is worth reporting early, so it can be looked at before it grows.

A fan that’s starting to make noise is giving you a warning. Getting it checked now means a planned repair rather than an emergency during service.

Your questions about extract fan repair in Breach

Can you come to Breach after we close?

Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Let us know the hours you’re closed and we will book within them.

Can sea air affect extract fan repair in Breach?

Yes, to a degree: at about 3 miles from the coast, Breach gets salt-laden air that corrodes metal faster. A fan housing that’s rusting near the coast can fail sooner, so it’s worth catching early.

Will you tell us when the next visit is due?

Yes. How often depends on use and condition and the report sets out why.

Can one contract cover all our sites?

Yes. You deal with one contact for every site in our area, and visits can be set on a regular cycle.

Do you work in Breach?

Yes. Breach is part of the area we cover, as part of our area across London and the South East.

What types of premises do you cover?

We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.

What if parts of the system can’t be reached?

Anything we cannot reach goes on the report, with photos where possible, and we tell you what would make it reachable, such as extra access panels in ductwork.

Who is responsible for fire safety on the premises?

The Fire Safety Order 2005 calls them the responsible person: normally the employer or whoever controls the premises. Landlords, facilities managers and managing agents can also hold responsibility.

How the job changes from site to site

Roof and wall-mounted fans

Many kitchen extract fans sit on a roof or an outside wall. How easy the fan is to reach shapes the job and we plan around it.

Direct-drive fans

In a direct-drive fan, the impeller sits on the motor shaft. There are no belts, so faults tend to be in the motor, bearings or impeller.

What we do, step by step

We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes anything from an hour or two to a full visit, depending on the fault. A few pictures of the system help us make the most of a visit to a place like Breach.

  1. A visit is booked, in the evening or overnight if that suits.
  2. The extract is switched off and the fan opened up.
  3. Bearings, drive, impeller, motor and mounts are inspected.
  4. You hear whether repair or replacement makes sense, with a fixed quote.
  5. We complete the work and check the fan runs smoothly.

Getting ready for the visit

  • Agree a time when the area can be out of use
  • Tell us about site rules, permits or sign-in
  • Clear loose items from the work area

How to get a quote

Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.

Get a price

Read more

How we price extract fan repair

You’ll get a fixed price before we start. It takes into account:

  • Whether several sites go on one quote
  • When the work can happen, such as evenings, overnight or weekends
  • Whether it’s a one-off visit or part of a schedule
  • How big the system is

Several systems or sites on one quote can make for a more efficient booking. Mention every system or site you need covered, and you’ll get one fixed quote.

Helping us quote

When you call or email, it’s useful to have:

  • Problems your staff have spotted
  • Wide photos of the system and the area around it
  • The roof, plant room or outside wall the system runs to
  • Where the site is and what kind of site it is

Here’s what helps us quote: where the site is, what it is and its opening hours, photos of the system and any previous report or certificate. Then phone us on 0345 646 2711, or send details by email.

Signs you need extract fan repair in Breach

Over the years, mountings loosen and rubber mounts break down. Then every vibration is passed into the duct and the building and that’s a common source of rattles.

These are the problems we see most often:

  • A fan shaking on its mountings
  • A failed fan that needs a replacement
  • A worn or slipping fan belt
  • An extract fan that rattles or knocks

For kitchens close to Newington station, a fan that stops mid-service needs fixing fast, and our emergency line runs 24/7.

What to look for in a quote

  • When they can work, and whether that is outside your opening hours
  • Whether a written report and photos are included
  • Whether the quote is based on a survey or photos
  • Whether the price is fixed

Choosing a duct cleaning contractor

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London