Kent · Ductwork cleaning
Ductwork cleaning in Breach, Kent
Professional ductwork cleaning in and around Breach, timed so the site keeps working and finished with a written report and pictures.
- Grease pooling at the foot of the riser
- Sections of duct with no access panels
- An insurer asking for TR19 evidence
Leave it or put it right?
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Putting off the clean only pushes readings higher. In a place like Breach, ductwork and fans are easy to forget until something goes wrong.
The cost depends on how big the system is, the condition it’s in and access to every part of it. You get a fixed price before work begins, so you know where you stand.
Why choose Duct Doctor in Breach
- A fixed price before any work starts
- CHAS and SafeContractor accredited, with ISO 9001
- Each visit written up, with pictures
- Ventilation hygiene specialists since 2009
How we handle ductwork cleaning in Breach
Not every duct has enough access panels. TR19 calls for any section we couldn’t reach to be recorded, and new panels can be fitted to reach it in future. It’s better to know than to assume. If you have smells of old cooking grease from the ductwork and an insurer asking for TR19 evidence, we can help, from vertical risers, horizontal duct runs and bends and junctions onwards.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we have been trading since 2009.
- Place
- Breach (ME9)
- Region
- Kent
- Records
- Certificate and photo report
- Quotes
- A fixed price before work begins
- Working hours
- Overnight and weekend work, 24/7 emergency callout
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
What we do, step by step
There are three stages on the day: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. Most of the time goes on the work itself, which takes anything from a few hours to several visits, depending on the length of duct. Rural roads and tight entrances are worth telling us about before a visit to Breach.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- Readings, pictures and a recommended next clean date complete the job.
Preparing for the visit
- Allow time for equipment near the work to be turned off and cool down
- Let us know how we reach the system, including roofs, risers and plant rooms
- Mention any sign-in, permit or induction we need
Get a fixed quote
Photos are the quickest way to a quote: the system from a couple of angles, plus any access panels or hatches. Add the site type and your opening hours, and many jobs can be priced from that alone.
Advice
Your questions about ductwork cleaning in Breach
Do you do school kitchen extract cleaning in Breach in the summer holidays?
Yes, holiday work suits schools best. The FSA’s register shows about 5 schools and colleges with food registrations within roughly a mile and a half of Breach. Just phone us on 0345 646 2711 or email us with your term dates and we’ll plan around them.
Does being near the coast affect ductwork cleaning in Breach?
It can, as Breach is within about 3 miles of the sea, where salt in the air is hard on metal. A fan housing that is rusting near the coast can fail sooner, so it’s worth catching early.
Can you fit access panels in our ductwork?
Yes, we install duct access panels. We place them where they help most, and we will recommend where.
How often does extract ductwork need cleaning?
BESA guidance sets minimum intervals by daily cooking hours: 3-monthly for heavy use, 6-monthly for moderate and 12-monthly for light use. Grease readings may show it needs doing sooner.
Is Breach in your area?
Yes. Our area takes in London and the counties of South East England, and that includes Breach.
What if parts of the system cannot be reached?
We never leave them off the paperwork. You’ll know exactly which parts weren’t reached and why, along with a quote to put access in.
How can I tell if my extract ducts are dirty?
Signs include grease dripping from joints, smells and a fan working harder, but measuring is the reliable way to know. Grease thickness testing shows exactly where the duct stands.
How much does ductwork cleaning cost in Breach?
We don’t publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before we start.
Also in Breach
Signs you need ductwork cleaning in Breach
Damaged or poorly fitted filters let more grease into the duct. More grease reaches the ductwork than it should, and build-up speeds up.
Look out for these warning signs:
- Duct runs with no cleaning record
- A grease test showing the duct is overdue
- Grease seeping out of the duct seams
- Hardened, baked-on grease in long horizontal runs
Commuter trade near Newington station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands.
Questions to ask before you book
- Whether VAT is included
- Whether the work can be done while the site is closed
- What paperwork you get at the end
- Whether the price is fixed
Fixed quotes for ductwork cleaning in Breach
Before we fix a price, we need to know a few things. We look at:
- How easy every part is to reach
- Parking and loading at the site
- The times the site is available
- The scale of the work
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Ask for a fixed quote and we’ll go through it with you.
Asking for a quote
Photos let us diagnose from a distance. Try to include:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Where the site is and what kind of site it is
- Wide pictures of the system and the area around it
- Your last certificate, test record or report
To help us quote: where the site is, what it is and its opening hours, a few photos and the last certificate or report, if there is one. Then phone us on 0345 646 2711 or use the quote form.
Ductwork cleaning in Breach: the local picture
The coast is only about 3 miles from Breach. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The Food Standards Agency lists about 8 pubs, bars and clubs as registered food businesses in and around Breach, up to about a mile and a half out. Where they serve hot food, their kitchen extracts need cleaning to TR19® like any restaurant’s. In Breach, food businesses are inspected by environmental health officers from Swale council. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. Our report lists what was cleaned and when, which is useful to have ready.
Where a hall near Church of St Mary, or anywhere in Breach, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Term dates shape school work: for a school like Newington Church of England Primary School, an extract clean fits neatly into a half-term or summer break.
Breach is about 3 miles east of Gillingham, in Kent. Whatever kind of site you run in Breach, ductwork cleaning is something we can help with. We can work out of hours so trading is not interrupted. Breach is one of 922 places in Kent where we work for ductwork cleaning. Maidstone is in our area too, about 9 miles from Breach.
Postcode districts we cover here for ductwork cleaning: ME9. Other places close to Breach include Newington (1 mile south-east), Lower Hartlip (1 mile south-west), Lower Halstow (1 mile north-east), Upchurch (1 mile north) and Moor Street (1 mile west). Within a short drive, we also cover Maidstone (9 miles south-west), Sittingbourne (4 miles east), Gravesend (13 miles west), Faversham (11 miles east), Northfleet (14 miles west) and Minster (8 miles north-east).
What’s near Breach
Locally, jobs take us to businesses close to Berengrave Chalk Pit, The Wheatsheaf pub and Leigh Academy Rainham, among other places. Breach’s nearest station is Newington station, about 0.8 miles south-east of the centre. Other landmarks nearby include Court Hall Museum (3.5 miles east) and Medway Maritime Hospital (5 miles west). Green spaces nearby include Bishop Saltings.
What staff can safely do
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that’s where we come in.
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
What the work involves, part by part
Access panels
We can fit new access panels where the duct needs them, making future cleans more complete. We will recommend where they should go.
Multi-storey and shared buildings
In a building with several floors, the duct may pass other tenants’ spaces. Access is planned with the building’s managers, so the clean is done safely and quietly.
Multi-site and managed buildings
Records are where multi-site compliance often slips. Every visit ends with a dated report and pictures, so you can show an insurer or inspector what was done at each site.
From a single site to a large estate, you get the same standard: diagnosis, a fixed price, work booked around your hours and a written report with pictures.