Kent · Ductwork cleaning
Ductwork Cleaning in Reculver
One call covers ductwork cleaning in Reculver, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Proof of duct cleaning for the insurer
- High readings at a recent grease test
- Heavy grease at the base of a riser
Aftercare tips
How long the results last depends on use and care. We suggest:
- Keep to the interval on the report
- Never cook with a filter missing
- Leave a way through to the access panels
- Do not switch the extract off early
When the duct is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Extra access panels mean more of the duct gets cleaned each time. It doesn’t stop grease forming, but it stops it building unseen.
How we handle ductwork cleaning in Reculver
The ductwork is where an extract clean is won or lost. Sections with no way in can go uncleaned for years. We open up every reachable section and record any we cannot reach, so you know exactly where you stand. If you have hardened, baked-on grease in long horizontal runs and gaps where access panels were never fitted, we can help, from attenuators, access panels and multi-storey ducts onwards.
For a kitchen in or near Reculver, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
We’ve been trading since 2009, and we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. CHAS, SafeContractor and ISO 9001 are in place too, and we are fully insured.
- Place
- Reculver (CT6)
- Region
- Kent
- Records
- Certificate and photo report
- Quote
- A fixed price before work begins
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Last updated
- 30 October 2026
Questions from Reculver
Which council inspects kitchens in Reculver?
In Reculver, it’s Canterbury City council that carries out food hygiene inspections. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
Do you work in villages like Reculver?
Yes, we work in villages as well as towns, and Reculver is covered. Just mention lanes, gates or anything else about the site when you book.
Do you offer maintenance contracts?
Yes. We run scheduled maintenance contracts, set at the interval the system needs. The report from each visit recommends the next date.
When is the ductwork cleaned?
The duct is cleaned out of hours, so evenings, nights and weekends are all possible. The extract and cooking equipment need to be off.
What about areas you cannot get to?
They’re marked on the report. Often the fix is extra access, such as new panels in ductwork, and we can fit those.
Can one contract cover all our sites?
Yes. We work across South East England and London, so we can schedule a run of sites on one programme. Every site has its own report.
What do you do to protect the area?
We cover floors and nearby surfaces with sheeting before we start, and waste is contained as we go. Before we leave, we tidy up and clean down.
What types of premises do you cover?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. We work with hotels, schools, care homes, offices, retail and leisure sites.
Signs you need ductwork cleaning in Reculver
Damaged or poorly fitted filters let more grease into the duct. More grease reaches the ductwork than it should and it fills faster.
The symptoms we’re asked about most include:
- Smells of old cooking grease from the ductwork
- Thick crusts of old grease along the duct
- Grease seeping out of the duct seams
- Grease pooling at the foot of the riser
If you run a church or community hall kitchen, near St Mary's Church or elsewhere in Reculver, its extract still collects grease from every lunch and event.
Questions to ask before you book
- Whether a survey comes first
- What hours they’ll be on site
- Whether the quote shows VAT
- Exactly which parts of the system are covered
Nearby places to Reculver
Other services in Reculver
Fixed quotes for ductwork cleaning in Reculver
We don’t publish a price list, because no two systems are the same. The quote depends on:
- Site requirements such as sign-in and permits
- What state the system is in
- Travel, parking and unloading
- One-off work versus a regular cycle
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. The price is fixed before any work starts.
What to send for a quote
We can often survey from photos. The most useful are:
- Your opening hours and when the area is out of use
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- Detail shots of panels, filters and grilles
- A few general shots of the system
Want a quote for ductwork cleaning? Please call 0345 646 2711 or send us an email with a few details about the site. We will talk you through the work and give you a fixed quote before anything is booked.
Multi-site and managed buildings
When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We can quote either party and send the paperwork to whoever needs it.
From a single site to a large estate, the standard is the same: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
Grease, kitchens and Reculver
At about 1 mile from the coast, Reculver is close enough for sea air to matter. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. It’s Canterbury City council that sends environmental health officers to food businesses in Reculver. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A dated certificate in the maintenance file answers the question before it’s asked. Fire safety in Reculver falls to Kent Fire and Rescue Service. Fire and rescue authorities enforce the Fire Safety Order in most non-domestic premises, and in a kitchen that fire risk includes the grease in the extract.
For schools such as Reculver Church of England Primary School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed.
Reculver is about 3 miles east of Herne Bay, in Kent. Whether your site is in the middle of Reculver or further out, ductwork cleaning is available to all kinds of commercial premises, from small sites to large estates. 922 places in Kent are on our list, from busy centres to quieter spots. For sites nearby, see our Maidstone page (30 miles or so).
We work across CT6 for ductwork cleaning and the streets around it. Local streets include Reculver Lane and Cherry Blossom Drive, and we cover them all for ductwork cleaning. Other places close to Reculver include Bishopstone (1 mile west), Hillborough (1 mile south-west), Hawthorn (2 miles south-west), Beltinge (2 miles west) and Highstead (2 miles south-west). Further out, we also cover Canterbury (8 miles south-west), Margate (8 miles east), Ramsgate (10 miles east), Broadstairs (10 miles east), Whitstable (7 miles west) and Deal (14 miles south-east).
Near you in Reculver
In Reculver, that means kitchens and buildings near Bishopstone Cliffs and The King Ethelbert Inn and the streets around them. The closest station to Reculver is Herne Bay station, roughly 3.5 miles west.
Part by part
Attenuators and discharge
The discharge is where the duct ends and air leaves the building. Grease can collect there and stain the area around it, so it’s cleaned as far as safe access allows.
Access panels
Extra panels can be installed where there are gaps, making future cleans more complete. The survey shows where they’re needed.
How the visit works
We are used to working while the site is closed. Evenings, nights and weekends are when much of our work happens, so a kitchen or building can carry on as usual the next day. On site, the work takes from a few hours to more than one visit, depending on duct length and access. In a small place like Reculver, the journey is planned ahead and the visit arranged around the site’s hours.
- We map the duct route and check where the access panels are.
- Grease readings are taken at set points along the duct.
- Access panels are opened and heavy deposits scraped out by hand.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- We test again, take pictures and note any part that couldn’t be reached.
Getting ready for the visit
- Find the previous report, if there is one
- Let us know about permits to work or site inductions
- Let us know when the site is closed or quiet
Get a fixed quote
Here’s what helps us quote: the address, the type of site and when it’s open, a few photos and any previous report or certificate. Once you have those, call 0345 646 2711 or email us.
Related advice
When something else is needed
Some problems need a different service or another trade:
- Ductwork that was poorly designed
- An extract fan that has stopped working
- Sections that cannot be reached safely without new access (those are recorded, and panels can be fitted)
If in doubt, ring 0345 646 2711, or send details by email and we will say what we think before you book.
What the work covers
- Horizontal duct runs
- Bends and junctions
- Multi-storey ducts
- Access panels
- Attenuators
- Vertical risers