Kent · Ductwork cleaning
Whitstable ductwork cleaning
Ductwork cleaning for Whitstable, with a survey first and a report with pictures at the end. Ask us for a fixed quote.
- Years of grease along the duct floor
- A grease test showing the duct is overdue
- Gaps where access panels were never fitted
Why act early in Whitstable
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. Anywhere that reaches 500 microns or more needs immediate spot cleaning. Leaving the duct makes those limits harder to keep to. With a fire risk assessment or inspection due, getting the work done first puts you on the front foot.
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all make a difference.
Why us?
- One number for every site across the South East and London
- CHAS, SafeContractor and ISO 9001
- Fixed quotes from a survey or photos
- Ventilation hygiene specialists since 2009
See what affects the cost or our accreditations and certificates.
About our ductwork cleaning in Whitstable
Not sure when the ductwork was last cleaned? A few details about the system are a good start when you phone us on 0345 646 2711 or send us an email, and a fixed price will follow, normally within one working day. Typical jobs include grease leaking from duct joints and a duct nobody has opened in years, across attenuators, bends and junctions and access panels.
In a town like Whitstable, most of the kitchen extracts we are asked about belong to restaurants, cafés, pubs, takeaways and school or care home kitchens. Whatever the kitchen, the canopy, filters, duct and fan all collect grease, and each is cleaned to the same TR19® standard.
Each visit ends with a written report and photos, so you have a record of what was done and when. Where the work is a TR19® Grease clean, the certificate is issued through the BESCA Vent Hygiene Elite portal.
- Location
- Whitstable (CT5)
- Wider area
- Kent
- Paperwork
- Certificate and photo report
- Price
- Fixed quote, normally within a working day
- Hours
- Out of hours as standard, 24/7 emergency line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
What a clean will not put right
Before booking, it helps to know what’s not included:
- A damper stuck open in the duct
- Leaking duct joints that need repair
- A failed fan motor at the end of the duct (a fan repair job)
If you are not sure, just phone us on 0345 646 2711 or send us an email and we will give you a straight answer.
Parts of the system we cover
- Horizontal duct runs
- Vertical risers
- Attenuators
- Multi-storey ducts
- Bends and junctions
- Access panels
Common problems we fix in Whitstable
A duct with too few access doors cannot be fully cleaned. Sections between panels go uncleaned, sometimes since the system was installed, and grease there keeps thickening unseen.
Any of these means the system needs a check-up:
- Duct runs that can’t be reached
- Thick crusts of old grease along the duct
- Grease leaking from duct joints
- Ductwork that has never been cleaned
If you run catering at a healthcare site, such as a hospital like Whitstable and Tankerton Hospital about 1 mile north-east, the extract may need cleaning more often than a part-time kitchen.
Questions to ask before you book
- Proof of accreditation you can verify
- Whether a survey comes first
- Whether they recommend a next date
- What records you’ll receive afterwards
Towns and villages near Whitstable
Also in Whitstable
Ductwork cleaning around Whitstable
Whitstable is within about 1 mile of the coast. Corrosion on the fan housing and cowl is worth a look at every clean, alongside the grease. The FSA’s food hygiene register includes about 36 bars, pubs and nightclubs within roughly a mile and a half of the centre of Whitstable. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Kent Fire and Rescue Service covers Whitstable. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
Church and community hall kitchens, near Church of St John (Methodist) or anywhere around Whitstable, are easy to forget, but their extracts collect grease like any other. If you cook for passing trade around Whitstable station, the extract can be cleaned between your last and first customer.
Whitstable is about 6 miles north-west of Canterbury, in Kent. Every kind of commercial site in Whitstable, ductwork cleaning is something we can help with. Visits can be booked for evenings, overnight or weekends so the site keeps running. Whitstable is one of 922 towns, villages and districts in Kent where we work for commercial clients. We also work in Maidstone, about 23 miles from Whitstable.
We cover every part of CT5 for ductwork cleaning and the roads nearby. If you need ductwork cleaning at premises on High Street, Station Road and Cranleigh Gardens or a nearby road, we can help. Being close to the A299 and A2990, Whitstable is simple for us to get to for ductwork cleaning. We also cover Tankerton (1 mile north-east), Chestfield (1 mile east), Swalecliffe (2 miles east), Radfall (2 miles south-east) and Yorkletts (2 miles south-west). We also work in nearby towns such as Canterbury (6 miles south-east), Margate (15 miles east), Sittingbourne (13 miles west), Faversham (7 miles west), Herne Bay (5 miles east) and Minster (11 miles north-west).
What’s near Whitstable
Around Whitstable, our work takes us to kitchens and buildings near Foxes Cross Bottom, Whitstable Social Club pub and Whitstable Junior School. There’s a railway station in Whitstable itself: Whitstable station. Other landmarks nearby include Whitstable and Tankerton Hospital (1 mile north-east) and Tankerton Castle (0.8 miles north). Not far away are West Blean and Thornden Woods.
How we price ductwork cleaning
Every site gets its own quote. This is what makes a difference:
- Access, including roofs, risers and ceiling voids
- Whether it’s a one-off visit or part of a schedule
- Whether several sites go on one quote
- Working hours and out-of-hours timing
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Call for a fixed quote and we’ll explain each part.
What to send for a quote
A few details help us quote accurately. With your enquiry, please include:
- Any symptoms, from odd noises to smells or leaks
- Detail shots of panels, filters and grilles
- The roof, plant room or outside wall the system runs to
- Your opening hours and when the area is out of use
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. After that, you get a fixed price for the work, before we start.
Staff cleaning versus specialist work
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, next to our reports.
Staff cleaning and specialist work are not the same thing. A daily filter wipe and a weekly filter wash keep grease down at the front of the system, but grease that has passed the filters is out of reach. Reaching it takes a specialist with the right equipment.
For landlords and multi-site operators
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept on a regular cycle.
Keeping records across a portfolio is half the battle. Each visit produces a dated report with photos, ready to show insurers, fire officers or EHOs.
What happens on the day
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Afterwards, the area is left tidy and the written report follows. Parking in a town like Whitstable is normally straightforward, so the main questions are access and timing.
- We trace the duct and find every way in.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Heavy deposits come out by hand, then each section is degreased.
- We close up, re-test, photograph and record anything out of reach.
Before we arrive
- Allow time for equipment near the work to be turned off and cool down
- Move anything stored near the system
- Tell us about site rules, permits or sign-in
How to get a quote
The quickest way to a quote is to send pictures: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Read more
Questions from Whitstable
Can school kitchens in Whitstable be cleaned in the holidays?
Yes, holiday work suits schools best. Food Standards Agency records list about 11 schools, colleges and universities with registered kitchens within about a mile and a half of Whitstable. Booking early in the term gives the best choice of holiday dates.
Which fire authority looks after Whitstable?
Kent Fire and Rescue Service is the fire and rescue service for Whitstable. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Do you offer maintenance contracts?
Yes. We run scheduled maintenance contracts, with visits at the interval your system needs. Each report recommends when the next visit should be.
How often does extract ductwork need cleaning?
BESA guidance sets minimum intervals by daily cooking hours: every 3 months for 12 to 16 hours, 6 months for 6 to 12 hours and 12 months for 2 to 6 hours. Measured grease sets the real interval.
What happens to the waste?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it does not spread.
What about areas you cannot get to?
Anything we cannot reach goes on the report, with a note of where it is, and we explain what access is needed, such as extra access panels in ductwork.
How is kitchen extract ductwork cleaned?
We get into the duct through its access panels. Thick deposits are removed by hand before degreasing, such as degreasers, hot water or steam.
What is TR19?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It sets out inspection, cleaning and record keeping, and it takes a risk-based approach.