Kent · Ductwork cleaning
Ductwork cleaning in Beltinge, Kent
Ductwork cleaning for Beltinge and the surrounding area: diagnosis first, then a fixed quote, the work and a report with pictures. Call for a fixed quote.
- An insurer asking for TR19 evidence
- Years of grease along the duct floor
- Heavy grease at the base of a riser
Aftercare tips
So the system stays in good health:
- Store the certificate with the fire risk assessment
- Run the extract fan throughout service
- Leave a way through to the access panels
- Check readings when the menu changes
File the paperwork in the maintenance log. An insurer, fire officer or EHO may ask to see it, and the photos make the duct’s condition easy to see.
Keep to the cleaning interval on the report. If the kitchen starts cooking longer hours, the interval may need to shorten, and grease thickness testing will show it.
Ductwork cleaning in Beltinge
We treat ductwork like a doctor treats arteries: find the blockages, clear them, then check the flow is right. Grease readings before and after give you the evidence, alongside before and after pictures. The work covers attenuators, vertical risers and horizontal duct runs, and common reasons people get in touch are grease leaking from duct joints and a duct clean needed for an insurer.
In a smaller place like Beltinge, many kitchens sit in older buildings or later extensions, with the duct running through a roof space or up an outside wall. Flat runs collect grease and need proper access to clean.
The sign-off is always in writing: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Beltinge (CT6)
- Region
- Kent
- Records
- Certificate and photo report
- Quote
- Fixed quote, typically within a working day
- When we work
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
What the work involves, part by part
Multi-storey and shared buildings
A fire in a duct in a shared building can affect far more than one kitchen, so the responsible person has more reason to keep it clean. Your certificate and report give building managers the record they need.
Access panels
Extra panels can be installed where there are gaps, making future cleans more complete. We will recommend where they should go.
Multi-site and managed buildings
For anyone managing more than one site, we can plan visits across the whole estate and price them together. Every building has its own written report, so each one has its own record.
Facilities teams in offices, schools and healthcare sites book us too in Beltinge and across Kent. Larger estates can be phased building by building to keep disruption down.
Fixed quotes for ductwork cleaning in Beltinge
Before we fix a price, we need to know a few things. We look at:
- How big the system is
- When the work can happen, such as evenings, overnight or weekends
- A single visit or a regular plan
- The number of sites or systems
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we will talk you through it.
Asking for a quote
A few details help us quote accurately. With your enquiry, please include:
- Photos showing the whole system and its surroundings
- The postcode and the type of business
- Your last certificate, test record or report
- Any symptoms, from odd noises to smells or leaks
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from photos or a survey, then send a fixed quote. To start, phone us on 0345 646 2711 or drop us a line.
Common problems we fix in Beltinge
A greasy duct is a fire path, in Beltinge as anywhere. Once it lights, fire can spread along the duct and into other areas, which is why the responsible person needs it under control.
Signs it’s time to call us include:
- Grease pooling at the foot of the riser
- Hardened, baked-on grease in long horizontal runs
- Fat dripping from the ductwork
- Smells of old cooking grease from the ductwork
If you run a church or community hall kitchen, near Church of St Bartholomew or elsewhere in Beltinge, its extract still collects grease from every lunch and event.
Questions to ask before booking
- Whether they’re fully insured
- Whether VAT is included
- How they set the interval to the next visit
- What happens if part of the system can’t be accessed
What ductwork cleaning cannot fix
We won’t sell you work that doesn’t address the problem, so these are the things it won’t cover:
- A damper stuck open in the duct
- Parts of the duct with no way in
- A failed fan motor at the end of the duct (a fan repair job)
Not sure which it is? You can call us on 0345 646 2711, or email photos and we will tell you honestly.
What the work covers
- Multi-storey ducts
- Vertical risers
- Access panels
- Bends and junctions
- Attenuators
- Horizontal duct runs
Also near Beltinge
What else we do in Beltinge
Ductwork cleaning in Beltinge: the local picture
The coast is only about 1 mile from Beltinge. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. Food Standards Agency records list about 4 restaurants, cafés and canteens and about 11 sandwich bars and takeaways within roughly a mile and a half of the centre of Beltinge. Wherever those kitchens cook under a canopy, the horizontal runs and risers need cleaning as well as the hood. Fire safety in Beltinge falls to Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Beltinge is Whitstable and Tankerton Hospital, about 4.8 miles west. If you look after a school kitchen, at a school such as Reculver Church of England Primary School or anywhere near Beltinge, the holidays are the usual time for a TR19® clean.
Beltinge is about 1 mile east of Herne Bay, in Kent. Anywhere in CT6, we can carry out ductwork cleaning at your premises. We cover 922 places across Kent, large and small. Our Maidstone page covers sites nearby (28 miles or so).
We cover every part of CT6 for ductwork cleaning and the roads nearby. We cover sites on Manor Road, Puffin Road and Cliff Avenue and nearby roads. If your site is just outside Beltinge, we cover Bishopstone (1 mile east), Hillborough (1 mile south-east), Hawthorn (1 mile south-east), Broomfield (1 mile south) and Herne Bay (1 mile west). Within a short drive, we also cover Canterbury (7 miles south-west), Margate (10 miles east), Ramsgate (11 miles east), Broadstairs (12 miles east), Whitstable (6 miles west) and Deal (15 miles south-east).
Around Beltinge
In Beltinge, that means kitchens and buildings near Herne Bay High School and Bishopstone Cliffs. The closest station to Beltinge is Herne Bay station, roughly 1.9 miles west of the centre. A little further out are Whitstable and Tankerton Hospital (4.8 miles west). For a walk, there’s West Blean and Thornden Woods.
What we do, step by step
There’s very little for your team to do on the day. A contact on site lets us in at the agreed time and points us to the system, and we take it from there. Afterwards, the area is left tidy and the written report follows. In a smaller place like Beltinge, parking is rarely the issue, but tell us about gates, roof access and opening hours.
- We map the duct route and check where the access panels are.
- We measure grease thickness at set points before cleaning.
- Access panels are opened and heavy deposits scraped out by hand.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- Readings and photos are repeated and any section we couldn’t reach is recorded.
Before we arrive
- Have your last certificate or report to hand
- Tell us about site rules, permits or sign-in
- Mention any locked doors, roof access or ceiling voids
Get a fixed quote
Quotes are quick. Call or email with a few details and you will usually have a fixed price within one working day. If we need to see the system first, we book a survey around your hours.
Read more
Beltinge questions
Who is the fire and rescue service for Beltinge?
Fire safety enforcement in Beltinge is handled by Kent Fire and Rescue Service. TR19® isn’t law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Who carries out food hygiene inspections in Beltinge?
Kitchens in Beltinge are inspected by Canterbury City council’s environmental health officers. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Do you have insurance?
Yes. We carry full insurance and have been trading since 2009.
Do you offer maintenance contracts?
Yes. Regular plans can run on 3, 6 or 12-monthly cycles, to suit the system and how it’s used.
Where does the waste go?
We contain it and take it with us. Grease, debris and waste water are collected as the work goes on, so it doesn’t spread.
How often should kitchen ducts be cleaned?
At least as often as BESA guidance sets for your cooking hours. Heavy use of 12 to 16 hours a day means at least every 3 months, while lighter use can go longer.
Can you quote from pictures?
Yes, for many jobs. Send a few wide photos plus close-ups of panels, filters or grilles, and a fixed quote normally follows within one working day. Some sites still need a visit, and we’ll say so.
What does TR19 mean?
It’s the industry benchmark for cleaning ventilation and kitchen extract systems, written by BESA. It covers how systems are inspected, cleaned and checked and expects a risk-based approach.