Greater London · Ductwork cleaning
Ductwork cleaning in Millbank, Greater London
Need ductwork cleaning in Millbank? We diagnose first, fix the price and book the work around your hours, finishing with a written report and photos.
- A rancid smell from the extract duct
- High readings at a recent grease test
- A duct nobody has opened in years
Why deal with it now?
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. Anywhere that reaches 500 microns or more needs immediate spot cleaning. Putting off the clean only pushes readings higher. London buildings are shared, so a fire or failure in one system can reach the neighbours above and beside you.
Kitchens, offices, schools and hospitals are all priced the same way: the size of the job, access, condition and working hours. Ask for a fixed quote and we’ll explain each part.
Why choose Duct Doctor in Millbank
- Fixed quotes from a survey or pictures
- Every job surveyed first
- Photo reports with every job
- Fully insured
Read our cost guide or our accreditations.
Ductwork cleaning in Millbank, done properly
The ductwork is where an extract clean is won or lost. Sections with no way in can go uncleaned for years. Each section we can reach is cleaned, and any we cannot is written down, so you know exactly where you stand. We’re often asked to deal with a duct clean needed for an insurer and thick crusts of old grease along the duct, on attenuators, multi-storey ducts and horizontal duct runs.
Kitchens in Millbank, like many across London, can share a building with flats or offices, with the duct running up through shared risers. Grease in a duct like that is a fire risk to the whole building, not just the kitchen, so a regular TR19® clean protects everyone in it.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, plus a certificate through the BESCA Vent Hygiene Elite portal when the work is a TR19® Grease clean. Any parts we couldn’t reach are recorded on it too.
- Location
- Millbank (SW1P, W1J, SW1V)
- Region
- Greater London
- Paperwork
- Certificate plus before-and-after photos
- Quotes
- A fixed price before any work starts
- Working hours
- When your site is closed, plus a 24/7 line
- Call
- 0345 646 2711
- Checked
- 30 October 2026
How the job changes from site to site
Bends and transitions
Grease tends to pile up at elbows. We clean it back by hand and with degreaser, and readings are taken there before and after.
Attenuators and discharge
The last section of duct before the discharge is often the coolest, so it can collect more grease than expected. It’s tested and cleaned along with the rest.
Millbank: your questions answered
Which environmental health team covers Millbank?
Kitchens in Millbank are inspected by Westminster council’s environmental health officers. Ratings are published by the Food Standards Agency, so a clean extract and good records are worth keeping up.
Which fire service covers Millbank?
That is London Fire Brigade. It’s worth keeping your fire risk assessment, TR19® certificates and photo reports together, ready to show.
What is TR19?
TR19® is the BESA specification for keeping ventilation systems clean. TR19® Grease, a standalone specification since 2019, covers grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
What do you do with what you remove?
It’s contained and taken away. Grease, debris and waste water are collected as the work goes on, so it does not spread.
Do you install duct access panels?
Yes, we do. We will point out where panels are needed, and fitting them means future cleans are more complete.
What should I send you?
A short description and a few pictures plus the address and your hours. We will ask for anything else we need.
How much notice do you need?
Earlier is better, particularly for night and weekend visits. We normally quote within one working day, and there’s a 24/7 line for emergencies.
How long does ductwork cleaning take?
Short runs are quick, but long or complex ducts may take several visits. We plan the work around your kitchen.
What staff can safely do
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That’s our job.
Away from the kitchen, the in-house job is mainly checking: keeping grilles clear, noting unusual noise or smells and logging filter changes. Cleaning inside ducts and units is specialist work.
Looking after it afterwards
Looking after the system between visits is straightforward, and it helps at the next visit:
- Ask us about extra access panels where sections can’t be reached
- File each certificate and photo report in the maintenance log
- Keep access panels clear of stored items
- Have the grease measured if cooking hours go up
Every panel we open is refitted when we finish, and the surrounding area is left clean. Grease and dirty water are contained and removed.
The less grease gets past the canopy, the cleaner the duct stays. Clean, properly seated filters are the duct’s best protection.
What ductwork cleaning looks like in Millbank
Food Standards Agency records list about 3,298 restaurants, cafés and canteens and about 440 sandwich bars and takeaways within roughly a mile and a half of the centre of Millbank. The duct above a busy canopy coats itself in grease long before anyone sees it. Fire safety in Millbank falls to London Fire Brigade. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Kitchens in Millbank get their food hygiene inspections from Westminster council. An officer looking round a kitchen will see the canopy, and grease there is hard to miss. Our report lists what was cleaned and when, which is useful to have ready.
Where a hall near Christ Church, or anywhere in Millbank, hosts lunch clubs or events, its extract gathers grease just as a café’s does. For kitchens close to London Victoria station, where the day often starts early and ends late, the extract can be cleaned overnight.
Millbank is about 1 mile south-east of City of Westminster, in Greater London. Whatever kind of site you run in Millbank, we can take on ductwork cleaning. Visits can be booked for evenings, overnight or weekends so the site keeps running. Our area takes in 764 places across Greater London, from busy centres to quieter spots.
We work across the SW1P, W1J and SW1V postcode area for ductwork cleaning and the roads nearby. Streets in the area include Eaton Lane, Wilton Road and Castle Lane, and we cover them all for ductwork cleaning. Being close to the A4 and A202, Millbank is easy for our technicians to reach at any hour. Close by, we work in Westminster (1 mile north), Victoria (1 mile south-west), Pimlico (1 mile south), Vauxhall (1 mile south-east) and Lambeth (1 mile south-east). Further out, we also cover Kensington (3 miles west), Shoreditch (3 miles north-east), Walthamstow (8 miles north-east), Hoxton (3 miles north-east), Whitechapel (3 miles north-east) and Hampstead (4 miles north-west).
Near you in Millbank
We work in commercial kitchens and buildings around Blewcoat School, St Matthew's School and London Library, among other places. Other local landmarks include St James's Park (under half a mile north) and Grafton Arms (under half a mile south). For rail, the closest station is London Victoria station, about 0.6 miles south-west. Other landmarks nearby include Westminster Hospital (under half a mile east) and Kingly Court (0.9 miles north). Green spaces nearby include St. James's Park Lake and Ludgate Hill.
What we are called out for in Millbank
A greasy duct is a fire path, in Millbank as anywhere. Burning grease can carry fire through the ductwork to other rooms or floors, which is why the responsible person needs it under control.
If you notice any of these, it’s worth a diagnosis:
- Thick crusts of old grease along the duct
- Proof of duct cleaning for the insurer
- Fat dripping from the ductwork
- Stale grease odours from the duct
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Millbank is Westminster Hospital, about within half a mile east.
Questions to ask before booking
- What happens if part of the system cannot be accessed
- What insurance they carry
- Whether the work can be done while the site is closed
- Whether the price is fixed
What affects the cost of ductwork cleaning
We quote each job individually. This is what makes a difference:
- Any permits to work or inductions
- A single visit or a regular plan
- What state the system is in
- How easy every part is to reach
What you pay reflects the actual work. That is why we survey first, from pictures or on site, and the price is agreed before we start.
Helping us quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Wide pictures of the system and the area around it
- The postcode and the type of business
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Your opening hours and when the area is out of use
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, call us on 0345 646 2711 or send us an email.
Places near Millbank
More services for Millbank
What happens on the day
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and the same goes into the written report. All told, the work takes a few hours for a short run, longer for long runs and tall risers. If your building in Millbank has sign-in rules, permits or key holders, mention them when you book.
- First we diagnose: the route, the access and the grease levels.
- You get a fixed price before work starts.
- We clean section by section, working from panel to panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, pictures and a next clean date.
How to prepare
- Arrange a key holder or contact on site
- Have your last certificate or report to hand
- Tell us about site rules, permits or sign-in
Ask for a quote
Here’s what helps us quote: where the site is, what it is and its opening hours, photos of the system and the last certificate or report, if there is one. Then phone us on 0345 646 2711 or use the quote form.