Hampshire · Ductwork cleaning
Ductwork cleaning in Kingsley, Hampshire
Ductwork cleaning for Kingsley and the surrounding area: diagnosis first, then a fixed quote, the work and a report with pictures. Call for a fixed quote.
- Hardened, baked-on grease in long horizontal runs
- A duct clean needed for an insurer
- A rancid smell from the extract duct
Ductwork cleaning for kitchens and businesses in Kingsley
Duct cleaning is the hardest part of an extract clean, and the part most often skipped. Sections with no way in can go uncleaned for years. We open up every reachable section and record any we cannot reach, so you know exactly where you stand. The work covers horizontal duct runs, bends and junctions and multi-storey ducts, and common reasons people get in touch are gaps where access panels were never fitted and stale grease odours from the duct.
Work in a small place like Kingsley starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy to discharge, then a TR19® certificate and a photo report.
Nothing is signed off by word of mouth: a written report, dated and illustrated with pictures, and for TR19® Grease cleans, a certificate issued through the BESCA VHE portal. Any parts we couldn’t reach are recorded on it too.
- Place
- Kingsley (GU35)
- Region
- Hampshire
- Reporting
- Certificate plus before-and-after photos
- Quotes
- Fixed quote, typically within a working day
- Working hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Updated
- 30 October 2026
Kitchen extracts in Kingsley
Kingsley, about 42 miles from central London, is within our usual area. We work evenings, overnight and at weekends, so the visit fits around the site. It’s East Hampshire council that sends environmental health officers to food businesses in Kingsley. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Healthcare kitchens cannot easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Kingsley is Chase Community Hospital, about 2.3 miles south. Term dates shape school work: for a school like Mill Chase Academy, an extract clean fits neatly into a half-term or summer break.
Kingsley is about 4 miles east of Alton, in Hampshire. For ductwork cleaning in and around Kingsley, it’s easy to get a fixed quote: please call 0345 646 2711 or drop us a line. We work across South East England and London, Kingsley included. Our Hampshire coverage runs to 683 places, Kingsley among them. For sites nearby, see our Guildford page, about 15 miles away.
Work in GU35 is surveyed, quoted and booked the same way as anywhere else. That includes premises on Forge Road, Woodfield and Churchfields and nearby roads. Other places close to Kingsley include Sleaford (1 mile east), Pinewood Village (1 mile south), Frithend (2 miles north-east), Bordon (2 miles south) and Lindford (2 miles south-east). We also work in nearby towns such as Basingstoke (13 miles north-west), Farnborough (12 miles north-east), Fleet (10 miles north), Aldershot (9 miles north-east), Alton (4 miles west) and Petersfield (10 miles south).
Local landmarks in Kingsley
In Kingsley, that means kitchens and buildings near The New Inn and the streets around them. The closest station to Kingsley is Bentley (Hampshire) station, about 3 miles north of the centre. Nearby you’ll also find Chase Community Hospital (2.3 miles south). Not far away are Deadwater Valley and Selborne Hill.
Common questions in Kingsley
Will you come out to Kingsley?
Yes, we work in villages as well as towns, and Kingsley is covered. The journey is planned ahead, so a few details about the route help.
Who carries out food hygiene inspections in Kingsley?
The local authority for Kingsley is East Hampshire council, and its environmental health team does the inspecting. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
What does TR19 mean?
It’s BESA’s specification and the benchmark insurers, fire officers and EHOs look to. It covers how systems are inspected, cleaned and checked, and it takes a risk-based approach.
What types of premises do you cover?
Commercial premises of every kind: from restaurants, pubs and hotels to schools, hospitals, care homes, offices, shops and food production sites. Work is timed around how each site runs.
What do you do to protect the area?
With sheeting and covers, before anything else happens. We keep the work contained and leave the area clean.
Do you have a 24/7 line?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line, and we will advise on what to do next.
What’s the cleaning interval for extract ductwork?
It follows the same interval as the whole extract, from every 3 months for heavy use to every 12 months for light use. Grease thickness testing shows whether that is often enough.
What’s involved in cleaning extract ducts?
We get into the duct through its access panels. Thick deposits are removed by hand before degreasing, such as degreasers, hot water or steam.
Why it’s worth doing now in Kingsley
Insurers know the risk of a greasy duct. Many require cleaning to TR19, and they can refuse or reduce a claim without proof. Your certificate and photo report show the ducts were cleaned. A fault that closes a site in a village like Kingsley affects everyone who depends on it.
The cost depends on the size of the system, the condition it’s in and access to every part of it. We give you a fixed price before any work starts, so you know where you stand.
Why us?
- CHAS, SafeContractor and ISO 9001
- Evenings, overnight and weekends, plus 24/7 emergency callout
- We diagnose before we treat
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
Part by part
Vertical risers
In taller buildings, a riser may pass through several floors and fire compartments, where fire dampers may be fitted. Damper testing is a separate service.
Access panels
After cleaning, every panel is closed and sealed, so grease and air stay inside the duct. We will tell you if any panel needs replacing.
Do you need ductwork cleaning in Kingsley?
A duct with too few access doors cannot be fully cleaned. Stretches with no way in may never have been touched, and the grease there keeps building out of sight.
If you notice any of these, it’s worth a diagnosis:
- Smells of old cooking grease from the ductwork
- Grease pooling at the foot of the riser
- Ductwork that has never been cleaned
- Proof of duct cleaning for the insurer
Volunteers running a hall kitchen near Church of All Saints, or anywhere in Kingsley, may not know when the extract was last cleaned, and a grease test settles it.
Before booking anyone
- Whether VAT is included
- Whether they’re fully insured
- How they set the interval to the next visit
- Whether inaccessible sections are listed on the report
Other services in Kingsley
What affects the quote in Kingsley
Some jobs are bigger than they look, and some smaller. The main factors:
- One-off work versus a regular cycle
- Site requirements such as sign-in and permits
- What state the system is in
- Whether several sites go on one quote
No two sites are the same, so we price each one individually. The size of the job, how we reach it, its condition and the working hours all play a part.
Asking for a quote
You don’t need the technical terms. It helps if you can send:
- Detail shots of panels, filters and grilles
- Your opening hours and when the area is out of use
- The site address and the type of premises
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
The quickest way to a quote is to send pictures: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Add the site type and your opening hours, and many jobs can be priced from that alone.
What ductwork cleaning can’t fix
Some problems need a different service or another trade:
- Duct sections that need replacing
- Faulty fire dampers
- An extract fan that has stopped working
Not sure which it is? You can ring 0345 646 2711, or send details by email and we’ll tell you honestly.
Where we work
- Bends and junctions
- Attenuators
- Vertical risers
- Horizontal duct runs
- Access panels
- Multi-storey ducts
What we do, step by step
There are three stages on the day: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, while signing off means the written report and pictures. The middle part takes longest, which takes a few hours for a short run, longer for long runs and tall risers. Somewhere as small as Kingsley, the date and timings are agreed with you well before the day.
- First the duct route is traced and every access point noted.
- We measure grease thickness at set points before cleaning.
- Through the access panels, thick grease is removed by hand first.
- The duct is degreased with the method that suits the grease, from degreasers to hot water or steam.
- We test again, take pictures and note any part that couldn’t be reached.
Before we arrive
- Tell us about site rules, permits or sign-in
- Let us know how we reach the system, including roofs, risers and plant rooms
- Have your last certificate or report to hand
How to get a quote
Getting a quote doesn’t take long. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.
Read more
Keeping the system healthy
Here’s the after-treatment advice, short and simple:
- Have the grease measured if cooking hours go up
- Diarise the next duct clean
- Leave a way through to the access panels
- Consider fitting panels where the report shows gaps
When the duct is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. It shows when and where the clean was done and by whom.
The less grease gets past the canopy, the cleaner the duct stays. Clean, properly seated filters are the duct’s best protection.