Greater London · Ductwork cleaning
Kenley ductwork cleaning
Specialist ductwork cleaning for Kenley: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Smells of old cooking grease from the ductwork
- Duct runs that cannot be reached
- Hardened, baked-on grease in long horizontal runs
About our ductwork cleaning in Kenley
Ductwork in Kenley is cleaned the same thorough way as everywhere else we work: readings at set points, heavy grease scraped out by hand, then degreasing to suit the deposit. Readings are taken again afterwards and photos go into your report. If you are dealing with thick deposits at the bottom of a vertical duct and an insurer asking for TR19 evidence, we can help, from multi-storey ducts, vertical risers and attenuators onwards.
Across London, many commercial kitchens are squeezed into basements and narrow back-of-house spaces, and the duct may run up through several floors before it discharges at the roof. In Kenley, as elsewhere in the capital, a long duct run means more access points to open and more grease to remove.
We have been trading since 2009, as a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
- Where
- Kenley (CR8, CR2)
- Wider area
- Greater London
- Reporting
- Certificate and photo report
- Price
- A fixed quote up front
- Hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Last updated
- 30 October 2026
Kenley: your questions answered
Which environmental health team covers Kenley?
That is Croydon council, whose environmental health officers carry out food hygiene inspections in Kenley. How often a business is inspected depends on the risk rating the council gives it, so it’s worth staying ready all year.
Who is the fire and rescue service for Kenley?
Kenley is in the area of London Fire Brigade. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
What happens to the waste?
We take it away when we go. During the work, it’s contained so the area stays clean.
What accreditations do you have?
We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.
What information do you need?
A short description and a few pictures, with the address and opening hours. We will ask for anything else we need.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before we start, and anything we remove is contained. At the end, the area is cleaned down.
Do you work in Kenley?
Yes. Our technicians work in Kenley, within the South East and London area we cover.
How often does extract ductwork need cleaning?
The minimum depends on how long the kitchen cooks each day: every 3 months for 12 to 16 hours, 6 months for 6 to 12 hours and 12 months for 2 to 6 hours. Measured grease sets the real interval.
Ductwork cleaning in Kenley: the local picture
There are about 56 restaurants, cafés and canteens and about 39 sandwich bars and takeaways within 1.5 miles or so of the middle of Kenley, according to the Food Standards Agency’s register. Behind every canopy among them is a run of ductwork that collects grease out of sight. Night work suits London kitchens, and roads and loading bays tend to be quieter too. Kenley sits within the area of London Fire Brigade. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Commuter trade near Kenley station can mean long cooking hours, and long hours put a kitchen into BESA’s more frequent cleaning bands. If you look after a school kitchen, at a school such as Harris Primary Academy Kenley or anywhere near Kenley, the holidays are the usual time for a TR19® clean. If you run catering at a healthcare site, such as a hospital like Purley War Memorial Hospital about 1.3 miles north-west, the extract may need cleaning more often than a part-time kitchen.
Kenley is about 1 mile south-east of Purley, in Greater London. For ductwork cleaning in and around Kenley, it’s easy to get a fixed quote: please phone us on 0345 646 2711, or send details by email. We work across South East England and London, Kenley included. Our Greater London coverage runs to 764 places, and Kenley is one of them. You can also see our page for London, about 12 miles away.
Here we cover the CR8 and CR2 postcode area for ductwork cleaning. Ductwork cleaning is available to premises on Oaks Road, Park Road and Roke Road and the roads around them. Being close to the A22, Kenley is easy for our technicians to reach for ductwork cleaning. Close by, we work in Riddlesdown (1 mile north), Sanderstead (1 mile north-east), Whyteleafe (1 mile south-east), Hamsey Green (1 mile east) and South Croydon (2 miles north). Within a short drive, we also cover London (12 miles north), City of Westminster (13 miles north), Marylebone (14 miles north), Kensington (13 miles north), St Pancras (14 miles north) and Shoreditch (14 miles north).
Around Kenley
Around Kenley, our work takes us to kitchens and buildings near Dollypers Hill and Riddlesdown Collegiate and the streets around them. Kenley has its own railway station: Kenley station. Nearby you’ll also find St George's Walk (3.4 miles north) and Croydon Airport Visitor Centre (2.4 miles north). Open spaces near Kenley include Duppas Hill and Foxley Wood.
What we do, step by step
On the day, we arrive at the time agreed with you, often in the evening, overnight or at the weekend so the site keeps working. Anything that needs to be off for the work is switched off and left to cool before work begins, and the area around the work is covered and protected. On site, it takes a few hours for a short run, longer for long runs and tall risers. If your building in Kenley has sign-in rules, permits or key holders, mention them when you book.
- We start by working out how the duct runs and where it can be opened.
- Set points along the runs are tested for grease.
- We open the panels and scrape out the heaviest grease.
- Next the ducts and risers are degreased, using whatever suits the deposit.
- We test again, take pictures and note any part that couldn’t be reached.
How to prepare
- Make sure equipment near the work can be switched off and left to cool
- Have your last certificate or report to hand
- Clear the space around the work
Getting a quote
Quoting starts with a diagnosis, from your pictures and details or, where that isn’t enough, a survey on site. After that, you get a fixed price for the work so you know the cost before we start.
Advice
Looking after it afterwards
So the system stays in good health:
- Have the grease measured if cooking hours go up
- Flag drips from the duct straight away
- Get panels fitted where the duct couldn’t be cleaned
- Keep the fan on while anything is cooking
File the paperwork in the maintenance log. It’s the evidence an insurer or inspector may ask for, and the pictures make the duct’s condition easy to see.
Run the extract the whole time the kitchen is cooking. Moving air carries vapour through rather than letting it settle, so switching off early adds to the build-up.
Towns and villages near Kenley
Also in Kenley
What affects the quote in Kenley
Before we fix a price, we need to know a few things. We check:
- When the work can happen, such as evenings, overnight or weekends
- The number of sites or systems
- Any permits to work or inductions
- The condition we find in the survey
One small site or a whole estate, the quote is built the same way: the work involved, the access and the timing. The price is fixed before any work starts.
Helping us quote
To speed up the quote, please include:
- The times we could work without disrupting the site
- Photos showing the whole system and its surroundings
- The site address and the type of premises
- Any access panels or hatches you can see
Here’s what helps us quote: where the site is, what it is and its opening hours, a few pictures and any previous report or certificate. Once you have those, give us a ring on 0345 646 2711 or send us an email.
Managing agents and facilities teams in Kenley
Where a tenant occupies the premises but the landlord owns the building, it’s worth checking the lease for who maintains the systems. We’re happy to deal with either side and send the paperwork to whoever needs it.
Running several sites is easier with one contractor. We work across London and the South East, so visits at different addresses can be planned together and kept to a regular schedule.
Part by part
Bends and transitions
The join where the canopy meets the duct is a common hotspot. We reach it from the plenum side where possible.
Attenuators and discharge
The last section of duct before the discharge is often the coolest, so it can collect more grease than expected. It’s tested and cleaned along with the rest.
Why it’s worth doing now in Kenley
A partly blocked duct slows the airflow. The fan works harder, the kitchen gets hotter and smoke lingers at the canopy, and grease may start to leak from joints. In a London building, a problem in a duct, damper or fan rarely stays in one unit.
We do not list prices on the website, because each job is priced on what it involves. For a fixed quote, call 0345 646 2711, or send details by email, and we will explain what it covers.
What you get with us
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fixed quotes from a survey or photos
- Photo reports with every job
- Out-of-hours work and a 24/7 emergency line
See how cleaning jobs are priced and how to check a contractor.
When something else is needed
We’d rather tell you now than book work that will not help, so these are the things it won’t cover:
- Duct sealed behind fixed ceilings or walls
- A failed fan motor at the end of the duct (a fan repair job)
- Ductwork that’s corroded, split or holed (that needs a ductwork contractor)
If in doubt, give us a ring on 0345 646 2711, or send details by email and we’ll say what we think.
What the work covers
- Horizontal duct runs
- Vertical risers
- Multi-storey ducts
- Bends and junctions
- Attenuators
- Access panels