Hampshire · Ductwork cleaning
Ductwork cleaning in Forestside, Hampshire
For ductwork cleaning in Forestside, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Grease pooling at the foot of the riser
- High readings at a recent grease test
- A rancid smell from the extract duct
Ductwork cleaning for kitchens and businesses in Forestside
Ductwork in Forestside is cleaned the same thorough way as everywhere else we work: readings at set points, heavy grease scraped out by hand, then degreasing to suit the deposit. Readings are taken again afterwards and photos go into your report. We are often asked to deal with sections of duct with no access panels and hardened, baked-on grease in long horizontal runs, on multi-storey ducts, attenuators and access panels.
For a kitchen in or near Forestside, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
The report is your system’s health record: a dated account with pictures of everything we did. For TR19® Grease cleans, the certificate comes through the BESCA Vent Hygiene Elite portal, ready for your insurer.
- Place
- Forestside (PO9)
- Region
- Hampshire
- Records
- Certificate and photo report
- Price
- A fixed price before any work starts
- Working hours
- Out of hours as standard, 24/7 emergency line
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
What happens if it’s left?
Under BESA guidance, the mean grease level should stay at or below 200 microns between cleans. A reading of 500 microns or more at any point means a spot clean straight away. Putting off the clean only pushes readings higher. Rural sites cannot always move to another kitchen or room when something fails.
What you pay depends on how big the system is, what state it’s in and access to every part of it. We give you a fixed price before work begins, so you know where you stand.
Why Forestside businesses choose us
- Work around your opening hours, with 24/7 emergency cover
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fixed quotes, usually within one working day
- CHAS, SafeContractor and ISO 9001
Read what affects the cost or our accreditations and certificates.
Towns and villages near Forestside
More services for Forestside
What ductwork cleaning looks like in Forestside
Environmental health officers from Chichester council inspect food businesses in Forestside. A greasy canopy or dripping filters are the sort of thing an inspection can pick up. A TR19® certificate and photo report after each clean gives you a record to show an inspector. About 54 miles out from central London, Forestside is part of the South East area we work across. We work evenings, overnight and at weekends, so the visit fits around the site.
Healthcare kitchens, like those at hospitals such as Havant War Memorial Hospital (about 5 miles south-west), often cook for long hours, which puts them in BESA’s heavier-use bands. Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Uppark is about 3.2 miles north), access may need planning. If you run a church or community hall kitchen, near Christ Church or elsewhere in Forestside, its extract still collects grease from every lunch and event.
Forestside is about 4 miles east of Horndean, in Hampshire. Wherever you are in the PO9 postcode area, we cover ductwork cleaning for commercial sites. Forestside is one of 683 places in Hampshire where we work for commercial clients. Our Portsmouth page covers sites nearby (10 miles or so).
Work in PO9 is surveyed, quoted and booked the same way as anywhere else. You’ll find streets such as Lodge Lane and Forestside, all of which we cover for ductwork cleaning. If your site is just outside Forestside, we cover West Marden (1 mile north-east), Chalton (3 miles north-west), Blendworth (3 miles west), Buriton (5 miles north) and Nursted (5 miles north). We also work in nearby towns such as Gosport (13 miles south-west), Havant (5 miles south-west), Fareham (13 miles west), Horndean (4 miles west), Waterlooville (6 miles west) and Petersfield (7 miles north).
Landmarks near Forestside
Around Forestside, our work takes us to kitchens and buildings near Stansted Park, among other places. The closest station to Forestside is Rowlands Castle station, about 2.2 miles south-west. Nearby you will also find Clanfield Earthwork (4 miles north-west) and Havant War Memorial Hospital (5 miles south-west). Not far away are Compton Down and Kingley Vale National Nature Reserve.
What staff can safely do
Your own staff can handle the daily basics: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, which is where we come in.
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
Your questions about ductwork cleaning in Forestside
Which fire and rescue service is responsible for Forestside?
Fire safety enforcement in Forestside is handled by Hampshire and Isle of Wight Fire and Rescue Service. TR19® is not law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Will you come out to Forestside?
Yes, Forestside is part of our area, however small the site. Photos of the system and directions to the site help us plan the visit.
Can you clean ductwork with no access panels?
Ductwork needs access to be cleaned. We record those sections on the report and can fit access panels.
What happens to the waste?
It leaves the site with us at the end of the visit. While we work, it’s kept contained to keep the area clean.
Are you insured?
Yes, fully. CHAS and SafeContractor accreditation sit alongside it, for sites that check contractor safety.
How much notice should we give?
Book as early as you can for planned work, particularly if your next visit is nearly due. For emergencies, we take calls 24/7.
Do you look at the system first?
Yes, always. We diagnose before we treat: the survey shows what needs doing and what access we need, and the quote is based on that.
Do you work with multi-site operators?
Yes. Our area covers London and the South East, so sites at different addresses can be planned together as one programme. Every site has its own report.
The process
A visit follows the same order every time: sheeting and protection first, isolate whatever needs isolating, carry out the ductwork cleaning, clear away and hand over the paperwork. The visit itself takes from a few hours to more than one visit, depending on duct length and access. Seeing the system in pictures first means the trip to Forestside can be planned properly.
- We trace the duct and find every way in.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Heavy deposits come out by hand, then each section is degreased.
- Panels are closed, readings and pictures repeated, and unreachable sections recorded.
How to prepare
- Dig out any earlier paperwork for the system
- Tell us about site rules, permits or sign-in
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
How to get a quote
Here’s what helps us quote: where the site is, what it is and its opening hours, a few photos and the last certificate or report, if there is one. Once you have those, ring 0345 646 2711, or email photos.
Read more
What ductwork cleaning cannot fix
In fairness, there are a few things this work won’t fix:
- Undersized or badly laid-out ducts
- Sections that can’t be reached safely without new access (those are recorded, and panels can be fitted)
- A damper stuck open in the duct
If you are not sure, just phone us on 0345 646 2711 or send us an email and we’ll give you a straight answer.
What the work covers
- Multi-storey ducts
- Attenuators
- Bends and junctions
- Access panels
- Horizontal duct runs
- Vertical risers
Multi-site and managed buildings
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Where a system serves more than one tenant, such as a shared riser, it helps to agree who arranges the work, and we’re happy to quote for all of it.
Whether it’s one building or many, the standard is the same: a survey first, a fixed quote, the work timed around the site and a report with photos.
How we price ductwork cleaning
Some jobs are bigger than they look, and some smaller. What affects the quote:
- Working hours and out-of-hours timing
- Site requirements such as sign-in and permits
- The condition of the system
- How big the system is
You will not find a price list here, because each job is priced on what it involves. Call for a fixed quote, and we will explain what it covers.
Helping us quote
A few details help us quote accurately. With your enquiry, please include:
- The postcode and the type of business
- Any symptoms, from odd noises to smells or leaks
- The times we could work without disrupting the site
- Any previous report or certificate
To get a fixed quote, call us on 0345 646 2711 or use the quote form with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You’ll usually have a quote within one working day.
Between visits
How long the results last depends on use and care. We suggest:
- Store the certificate with the fire risk assessment
- Keep the fan on while anything is cooking
- Keep grease filters clean and fitted whenever you cook
- Check readings when the menu changes
Every panel we open is refitted when we finish, and the area around them is cleaned down. Grease and dirty water are contained and removed.
The less grease gets past the canopy, the cleaner the duct stays. Keep the filters clean, well fitted and in place whenever you cook.