Hampshire · Ductwork cleaning
Duct cleaning in Elson
Ductwork cleaning for Elson and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Ask us for a fixed quote.
- A duct nobody has opened in years
- Readings above 200 microns from a grease thickness test
- Years of grease along the duct floor
Kitchen extracts in Elson
Elson lies within about 1 mile of the sea. Salt air speeds up corrosion of roof-level fans, discharge cowls and their fixings. The FSA’s food hygiene register shows about 53 restaurants, cafés and works canteens and about 37 sandwich bars and takeaways in Elson and the streets around it, up to about 1.5 miles out. Each kitchen that cooks under a canopy sends grease-laden air into a duct, where it cools and settles. Environmental health officers from Gosport council inspect food businesses in Elson. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
If you run catering at a healthcare site, such as a hospital like Gosport War Memorial Hospital about 1.4 miles south, the extract may need cleaning more often than a part-time kitchen. A hall kitchen that only cooks for events, whether near Church of St Thomas or elsewhere in Elson, still needs its extract cleaned, just less often.
Elson is about 1 mile north of Gosport, in Hampshire. If you need ductwork cleaning in Elson, it’s easy to get a fixed quote: please give us a ring on 0345 646 2711 or drop us a line. Our area covers London and the South East, including Elson. Elson is one of 683 places in Hampshire we cover for ductwork cleaning.
Ductwork cleaning in PO12 and PO13 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Ham Lane, Quay Lane and Avery Lane or a nearby road, our technicians can take on the work. Elson is on the A32, which makes it straightforward for our technicians to reach for ductwork cleaning. Other places close to Elson include Gosport (1 mile south), Forton (1 mile south), Bridgemary (1 mile north-west), Priddy's Hard (1 mile south-east) and Rowner (1 mile north-west). We also work in nearby towns such as Havant (8 miles north-east), Eastleigh (14 miles north-west), Fareham (3 miles north-west), Horndean (9 miles north-east), Hedge End (10 miles north-west) and Waterlooville (7 miles north-east).
Near you in Elson
We work in commercial kitchens and buildings around The Kings Head pub, St Vincent College and Brune Park Community School and the streets around them. The closest station to Elson is Portsmouth Harbour station, about 2.1 miles south-east. Well-known places in the area include Search (1.6 miles south-east) and Portchester Castle (2.2 miles north-east). Green spaces nearby include West of the River Alver and Portsdown Hill.
How we handle ductwork cleaning in Elson
We treat ductwork like a doctor treats arteries: diagnose where grease has built up, clear it and confirm the result. Grease readings before and after give you the evidence, alongside before and after photos. The work covers horizontal duct runs, bends and junctions and multi-storey ducts, and the jobs we see most are stale grease odours from the duct and thick deposits at the bottom of a vertical duct.
Around a smaller place like Elson, kitchen extracts tend to belong to pubs, cafés, takeaways and school or care home kitchens. A kitchen that cooks fewer hours still builds up grease, so cleaning is planned around how much it cooks and what the readings show.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Elson (PO12, PO13)
- Region
- Hampshire
- Paperwork
- TR19® certificate and photo report
- Quote
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Phone
- 0345 646 2711
- Checked
- 30 October 2026
Managing agents and facilities teams in Elson
We work for landlords, managing agents and facilities managers as well as the people running the site. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we can quote for the whole system.
We regularly work with managing agents. Tell us the site, the work and the access arrangements and we will come back with a fixed quote.
Different parts, different methods
Horizontal duct runs
Grease settles on the floor of a flat duct run. Thick deposits are scraped out by hand before degreasing, then the walls and roof are cleaned too.
Vertical risers
Cleaning a riser needs access along its height. Any part that can’t be safely reached is recorded.
Do you need ductwork cleaning in Elson?
Wherever the kitchen is, in Elson or elsewhere, the duct fills in the same way: daily cooking hours, the menu and the state of the filters. Under BESA guidance, the minimum interval is 3, 6 or 12 months, by daily cooking hours.
The symptoms we’re asked about most include:
- Thick deposits at the bottom of a vertical duct
- A duct nobody has opened in years
- Grease leaking from duct joints
- Stale grease odours from the duct
If you look after a school kitchen, at a school such as Elson Infant School or anywhere near Elson, the holidays are the usual time for a TR19® clean.
What to look for in a quote
- When the next visit should be, and why
- If they look at the system before pricing
- Proof of insurance
- Whether inaccessible sections are listed on the report
Elson questions
Do you clean school canteen extracts around Elson out of term?
Yes, out-of-term visits are normal for schools. There are about 26 schools, colleges and universities on the FSA’s food hygiene register within about 1.5 miles of Elson. Booking early in the term gives the best choice of holiday dates.
Do you work in villages like Elson?
Yes, Elson is part of our area, however small the site. Just mention lanes, gates or anything else about the site when you book.
Can you clean ductwork with no access panels?
Ductwork needs access to be cleaned. Those parts are listed, and we can install panels so they’re reached next time.
What’s TR19?
TR19® is the BESA specification for keeping ventilation systems clean. Since 2019, TR19® Grease has been a standalone specification for grease in kitchen extract systems, while TR19® Air covers other supply and extract ductwork.
Are you accredited?
Duct Doctor is a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. We also hold CHAS, SafeContractor and ISO 9001, and we are fully insured.
Do you offer emergency callouts?
Yes, any time. If something urgent happens, like a fan failing or damage after a fire, call our 24/7 line, and we’ll advise on what to do next.
How is kitchen extract ductwork cleaned?
We survey the route, test the grease, then open the access panels. We clean the runs and risers section by section, then the readings are repeated.
Do you look at the system first?
Yes, always. We diagnose before we treat: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Between visits
Here’s the after-treatment advice, in brief:
- Don’t block access panels with shelving or stock
- Tell us if grease leaks from the ductwork
- Store the certificate with the fire risk assessment
- Get panels fitted where the duct couldn’t be cleaned
When the duct is cleaned as part of a full TR19® Grease clean, a TR19 certificate is issued through the BESCA Vent Hygiene Elite portal. It records the date, the location and the technician.
Run the extract the whole time the kitchen is cooking. Moving air carries vapour through rather than letting it settle, so switching off early adds to the build-up.
What a clean will not put right
To be straight with you, some problems need a different fix:
- A damper stuck open in the duct
- Ductwork that was poorly designed
- Parts of the duct with no way in
If you are not sure, just phone us on 0345 646 2711 or send us an email and we will give you a straight answer before booking.
What the work covers
- Multi-storey ducts
- Access panels
- Bends and junctions
- Attenuators
- Horizontal duct runs
- Vertical risers
What staff can safely do
Keep a record of what your team does. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, next to our reports.
Some jobs should never be done in-house: opening up ductwork, cleaning fans, drop testing fire dampers and measuring grease call for the right kit, training and safe access. Leave those to us.
Places near Elson
What else we do in Elson
What we do, step by step
The first job on site is protection: floors, worktops and anything near the work are covered. Then we make the system safe and start. The work on site takes a shift or more, depending on the length of the runs and the number of access points, and the area is cleaned down before we leave. Visits to a place like Elson are planned ahead, so we arrive with what the survey says the job needs.
- First we diagnose: the route, the access and the grease levels.
- A fixed quote follows, based on what we found.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- Readings, pictures and a recommended next clean date complete the job.
Preparing for the visit
- Name a contact who can let us in at the agreed time
- Make sure equipment near the work can be switched off and left to cool
- Clear the space around the work
Get a fixed quote
There’s no standard price list, because every site is different. Instead, we look at your site first, from photos or a survey, then send a fixed quote. To get going, give us a ring on 0345 646 2711, or send details by email.