Kent · Ductwork cleaning
Ductwork cleaning in Devil's Den, Kent
For ductwork cleaning in Devil's Den, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- High readings at a recent grease test
- Smells of old cooking grease from the ductwork
- Thick deposits at the bottom of a vertical duct
About our ductwork cleaning in Devil's Den
Many ducts were installed with too few access doors. Where a section can’t be reached, TR19 expects it to be recorded on the report, and we can fit new access panels so it’s cleaned next time. It’s better to know than to assume. Common call-outs are for ductwork that has never been cleaned and grease leaking from duct joints, on vertical risers, bends and junctions and multi-storey ducts.
In a small place like Devil's Den, kitchens are often in older or extended buildings, with long single-storey duct runs, and those horizontal sections are where grease settles. Access, parking and timings are agreed before the day.
For insurers and inspectors, the record counts. So every job comes with a written report and pictures, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Place
- Devil's Den (ME17)
- Wider area
- Kent
- Reporting
- TR19® certificate and photo report
- Quotes
- Fixed quote, typically within a working day
- When we work
- Nights, weekends or holidays to suit you
- Phone
- 0345 646 2711
- Reviewed
- 30 October 2026
Devil's Den questions
Who enforces fire safety at workplaces in Devil's Den?
Devil's Den is in the area of Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Do you cover smaller places like Devil's Den?
Yes. Devil's Den is within the area we cover across London and the South East. A survey first, from pictures or a visit, means we arrive with the right kit.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
How often does extract ductwork need cleaning?
The duct is cleaned as part of the whole system, at intervals set by BESA guidance, ranging from 3-monthly to 12-monthly. Readings tell you if it needs to be more often.
How is kitchen extract ductwork cleaned?
We get into the duct through its access panels. Thick deposits are removed by hand before degreasing, such as degreasers, hot water or steam.
How long does it take to clean extract ducts?
It depends on the length of the duct, the number of access panels and how much grease there is. As a guide, it takes a shift or more, depending on the length of the runs and the number of access points.
How do you protect the area?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
What about areas you cannot get to?
We never leave them off the paperwork. You will know exactly which parts weren’t reached and why, along with a quote to put access in.
Aftercare tips
No system stays clean for ever, but care slows the build-up. Our tips:
- Get panels fitted where the duct couldn’t be cleaned
- Ask for a grease thickness test if the kitchen gets busier
- Keep to the interval on the report
- File each certificate and photo report in the maintenance log
The report names every part of the duct that couldn’t be reached and why. We can fit access panels so those sections are cleaned next time.
Have access panels fitted where sections can’t be reached. It does not stop grease forming, but it stops it building unseen.
How we price ductwork cleaning
We don’t publish a price list, because no two systems are the same. The quote depends on:
- Whether several sites go on one quote
- How big the system is
- Site rules, permits and inductions
- Access, including roofs, risers and ceiling voids
No two sites are the same, so each one gets its own fixed quote. The size of the job, how we reach it, its condition and the working hours all play a part.
What to send for a quote
Before you ask for a quote, gather:
- Any access panels or hatches you can see
- The paperwork from the last visit, if you have it
- The site address and the type of premises
- Wide pictures of the system and the area around it
To get a fixed quote, call 0345 646 2711, or send details by email with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. We normally come back within one working day.
Ductwork cleaning around Devil's Den
The Food Standards Agency lists about 3 pubs, bars and clubs as registered food businesses within roughly a mile and a half of the centre of Devil's Den. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. Kent Fire and Rescue Service covers Devil's Den. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. It’s Maidstone council that sends environmental health officers to food businesses in Devil's Den. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked.
Whether the kitchen is in Devil's Den itself or nearby, a TR19® clean covers the whole system, canopy to discharge. Historic houses near Devil's Den, such as Stoneacre about 4 miles north, are a reminder that older buildings with event kitchens can have long, awkward duct routes.
Devil's Den is about 5 miles south of Maidstone, in Kent. Every kind of commercial site in Devil's Den, we can take on ductwork cleaning. We can work out of hours so trading is not interrupted. Devil's Den is one of 922 towns, villages and districts in Kent where we work for ductwork cleaning.
Our technicians cover all of the ME17 postcode area for ductwork cleaning and the roads nearby. Close by, we work in Farthing Green (1 mile south-east), Rabbit's Cross (1 mile west), Cross-at-Hand (1 mile west), Hawkenbury (1 mile south) and Staplehurst (2 miles south-west). We also work in nearby towns such as Maidstone (5 miles north), Ashford (13 miles east), Sittingbourne (12 miles north-east), Royal Tunbridge Wells (14 miles west), Tonbridge (13 miles west) and Kings Hill (9 miles north-west).
Local landmarks in Devil's Den
For rail, the closest station is Staplehurst station, roughly 1.8 miles south-west. Other landmarks nearby include Sutton Valence Castle (1.6 miles north-east) and South East Romany Museum (3 miles south-west).
In-house cleaning or a specialist?
Keep a record of what your team does. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, alongside our reports.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
The process
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with photos. The middle part takes longest, and that takes a few hours for a short run, longer for long runs and tall risers. Rural roads and tight entrances are worth telling us about before a visit to Devil's Den.
- We trace the duct and find every way in.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and photos repeated, and unreachable sections recorded.
Before we arrive
- Make sure equipment near the work can be switched off and left to cool
- Tell us where we can park and unload
- Tell us about access, such as roof hatches, plant rooms, ceilings or locked areas
Get a fixed quote
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. Then we send a fixed price so you know the cost before any work starts.
Advice
Multi-site and managed buildings
We regularly work with managing agents. Send the address, what’s needed and how access works, and we will send a fixed quote.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
How the job changes from site to site
Horizontal duct runs
Flat runs of duct link the canopy to the riser or the outside wall. They collect grease as the air cools and slows, and we clean them section by section through access panels.
Multi-storey and shared buildings
A duct that climbs several floors may be cleaned over more than one visit. Visits are planned around the building’s hours, out of hours where possible.
What a clean won’t put right
In fairness, some problems need a different fix:
- Duct sealed behind fixed ceilings or walls
- A damper stuck open in the duct
- An extract fan that has stopped working
Not sure which it is? You can call us on 0345 646 2711 or use the quote form and we’ll tell you honestly.
What the work covers
- Multi-storey ducts
- Attenuators
- Access panels
- Bends and junctions
- Vertical risers
- Horizontal duct runs