Kent · Ductwork cleaning

Duct cleaning in Rabbit's Cross

Ductwork cleaning for Rabbit's Cross and the surrounding area: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.

  • Fat dripping from the ductwork
  • Sections of duct with no access panels
  • A rancid smell from the extract duct

Book ductwork cleaning in Rabbit's Cross

Ductwork cleaning for kitchens and businesses in Rabbit's Cross

Each extract duct we take on in Rabbit's Cross goes through the full routine: we test the grease first, remove thick deposits by hand and degrease what’s left. Readings are taken again afterwards and pictures go into your report. Common call-outs are for heavy grease at the base of a riser and an insurer asking for TR19 evidence, across attenuators, bends and junctions and multi-storey ducts.

Work in a small place like Rabbit's Cross starts with a call to agree access and timings, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.

Accreditations are easy to claim and worth checking. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, and we’re fully insured.

Extract duct interior shown dirty and then cleaned back to bare metal
Where
Rabbit's Cross (ME17)
Wider area
Kent
Paperwork
Certificate and photo report
Quote
A fixed price before any work starts
Working hours
Out of hours as standard, 24/7 emergency line
Phone
0345 646 2711
Last updated
30 October 2026

Your questions about ductwork cleaning in Rabbit's Cross

Is Rabbit's Cross within the area you cover?

Yes, we work in villages as well as towns, and Rabbit's Cross is covered. A survey first, from pictures or a visit, means we arrive with the right kit.

Who would carry out a food hygiene inspection at a kitchen in Rabbit's Cross?

Kitchens in Rabbit's Cross are inspected by Maidstone council’s environmental health officers. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.

How do you know if the ductwork needs cleaning?

We measure it. Using a Wet Film Thickness Test or Deposit Thickness Test, we check the grease at set points. BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.

Can you clean ductwork with no access panels?

Without a way in, a section cannot be cleaned properly. We record those sections on the report and can fit access panels.

Are you insured?

Yes. Duct Doctor is fully insured, and we can share the details when you need them.

How far ahead should we book?

Book as early as you can for planned work, especially if the next clean or test is due soon. Emergencies are different, because our line is open 24/7.

Will I get a report after the ducts are cleaned?

A photo report, with readings and before and after pictures, plus a TR19 certificate for a full system clean. The report says when the next clean is due.

What should I send you?

Some pictures and a quick description of the system plus the address and your hours. If we need more, we’ll ask.

Multi-site and managed buildings

Keeping records across a portfolio is half the battle. Every visit ends with a dated report and pictures, ready to show insurers, fire officers or EHOs.

When the building owner and the occupier are different, it’s worth checking the lease for who maintains the systems. We are happy to deal with either side and send the paperwork to whoever needs it.

Honest limits

Not every problem is solved by ductwork cleaning, and we’ll tell you before we start. It will not put right:

  • A duct that’s too small or badly routed for the kitchen (a design issue)
  • Parts of the duct with no way in
  • An extract fan that has stopped working

If you are not sure, just give us a ring on 0345 646 2711, or email photos and we’ll give you a straight answer.

What we work on in Rabbit's Cross

  • Horizontal duct runs
  • Access panels
  • Attenuators
  • Multi-storey ducts
  • Vertical risers
  • Bends and junctions

What happens on the day

Before we leave, we walk the area with whoever is on site. Anything we couldn’t reach or that needs attention is pointed out there and then, and the same goes into the written report. All told, the work takes from a few hours to more than one visit, depending on duct length and access. Seeing the system in photos first means the trip to Rabbit's Cross can be planned properly.

  1. We trace the duct and find every way in.
  2. We take grease readings along the route.
  3. Once the kitchen has closed, we protect the area and open the panels.
  4. Thick grease is scraped out, then the runs and risers are degreased.
  5. We close up, re-test, photograph and record anything out of reach.

Getting ready for the visit

  • Make sure someone can let us in and lock up afterwards
  • Tell us about site rules, permits or sign-in
  • Have your last certificate or report to hand

Getting a quote

There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To start, give us a ring on 0345 646 2711 or use the quote form.

Get a price

Read more

Grease, kitchens and Rabbit's Cross

Rabbit's Cross is covered by Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. About 35 miles out from central London, Rabbit's Cross is part of the South East area we work across. Visits are booked around your hours, evenings and weekends included.

Historic houses near Rabbit's Cross, such as Stoneacre about 3.9 miles north, are a reminder that older buildings with event kitchens can have long, awkward duct routes.

Rabbit's Cross is about 5 miles south of Maidstone, in Kent. Every kind of commercial site in Rabbit's Cross, ductwork cleaning is something we can help with. We can work out of hours so the site keeps running. Rabbit's Cross is one of 922 places in Kent where we work for ductwork cleaning.

Every address in ME17 is within our area for ductwork cleaning, from the main roads to the quietest streets. Nearby, we also carry out ductwork cleaning in Cross-at-Hand (1 mile south), Devil's Den (1 mile east), Underling Green (2 miles west), Farthing Green (2 miles east) and St Ann's Green (2 miles south-west). We also work in nearby towns such as Maidstone (5 miles north), Ashford (14 miles east), Sittingbourne (13 miles north-east), Royal Tunbridge Wells (13 miles west), Tonbridge (12 miles west) and Kings Hill (8 miles north-west).

Local landmarks in Rabbit's Cross

The closest station to Rabbit's Cross is Staplehurst station, roughly 1.8 miles south of the centre. A little further out are South East Romany Museum (2.4 miles south-west) and Oakwood Hospital (5.7 miles north-west).

Map of Rabbit's Cross © OpenStreetMap contributors

How the job changes from site to site

Multi-storey and shared buildings

A fire in a duct in a shared building can affect far more than one kitchen, so the responsible person has more reason to keep it clean. Your certificate and report give building managers the record they need.

Bends and transitions

A bend can hold far more grease than a straight run of the same length. It’s scraped out and degreased, and readings are taken there before and after.

Signs you need ductwork cleaning in Rabbit's Cross

A greasy duct is a fire path, in Rabbit's Cross as anywhere. Once it lights, fire can spread along the duct and into other areas, which is why the responsible person needs it under control.

Look out for these warning signs:

  • Grease pooling at the foot of the riser
  • Grease seeping out of the duct seams
  • Gaps where access panels were never fitted
  • Readings above 200 microns from a grease thickness test

If you run catering at a healthcare site, such as a hospital like Oakwood Hospital about 5.7 miles north-west, the extract may need cleaning more often than a part-time kitchen.

What to look for in a quote

  • Which accreditations they hold, and whether you can check them
  • Whether inaccessible sections are listed on the report
  • What hours they’ll be on site
  • When the next visit should be, and why

Our hiring checklist

Fixed quotes for ductwork cleaning in Rabbit's Cross

Sites vary more than people expect. What affects the quote:

  • Site requirements such as sign-in and permits
  • The scale of the work
  • Travel, parking and unloading
  • Whether we need access equipment or extra panels

You won’t find a price list here, because the cost depends on the site in front of us. For a fixed quote, ring 0345 646 2711 or email us, and we will talk you through it.

What we need to know

A few details help us quote accurately. With your enquiry, please include:

  • Where the site is and what kind of site it is
  • Wide pictures of the system and the area around it
  • Where the plant sits or the system leaves the building, such as a roof or outside wall
  • When the site is open and when it’s quiet

Want a quote for ductwork cleaning? Please ring 0345 646 2711 or drop us a line and tell us about the site. We’ll explain what we’d do and send a fixed quote before you commit to anything.

Between visits

Aftercare is simple, and it helps at the next visit:

  • Don’t switch the extract off early
  • Get panels fitted where the duct couldn’t be cleaned
  • Keep access panels clear of stored items
  • Flag drips from the duct right away

File the paperwork in the maintenance log. It’s the evidence an insurer or inspector may ask for, and the pictures make the duct’s condition easy to see.

Extra access panels mean more of the duct gets cleaned each time. Grease you can reach is grease that gets removed.

BESCA Vent Hygiene EliteMember, cleaning to BESA TR19® Grease
CHAS · SafeContractorISO 9001 and fully insured
Certificate and photo reportWith every clean
24/7 emergency calloutEvenings, nights and weekends
Since 2009South East England and London