Oxfordshire · Ductwork cleaning
Churchill ductwork cleaning
Ductwork cleaning for Churchill, from a team that has been trading since 2009. Evenings, overnight and weekends, plus a 24/7 emergency line.
- A grease test showing the duct is overdue
- Grease leaking from duct joints
- Sections of duct with no access panels
Ductwork cleaning in Churchill
No two duct runs are the same, in Churchill or anywhere else. Some run a short distance to an outside wall, others climb several floors to the roof. The survey traces the route and finds every access point before we quote. The work covers bends and junctions, access panels and vertical risers, and common reasons people get in touch are ductwork that has never been cleaned and duct runs that can’t be reached.
Work in a small place like Churchill starts with a call to agree access and timings, and the clean itself is the same full TR19® job as in any town: canopy to discharge, then a TR19® certificate and a photo report.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we are fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Churchill (OX7)
- Region
- Oxfordshire
- Records
- Certificate plus before-and-after pictures
- Price
- A fixed price before any work starts
- Hours
- Out of hours as standard, 24/7 emergency line
- Call
- 0345 646 2711
- Page updated
- 30 October 2026
Why it’s worth doing now in Churchill
A fire in a greasy duct is hard to reach and hard to stop. It can travel through the ductwork to other parts of the building, which is why the duct matters as much as the canopy. Rural sites cannot always move to another kitchen or room when something fails.
We do not list prices on the website, because each job is priced on what it involves. Call for a fixed quote, and we’ll talk you through it.
Why us?
- CHAS, SafeContractor and ISO 9001
- Fixed quotes, normally within one working day
- Every visit written up, with pictures
- In business since 2009
See our cost guide and our accreditations.
Ductwork cleaning in Churchill: the local picture
The Food Standards Agency lists about 3 bars, pubs and nightclubs as registered food businesses within 1.5 miles or so of the middle of Churchill. A pub or hotel kitchen that cooks every day builds up grease in its extract like any other. The fire and rescue service for Churchill is Oxfordshire Fire and Rescue Service. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel. Environmental health officers from West Oxfordshire council inspect food businesses in Churchill. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Our report lists what was cleaned and when, which is useful to have ready.
Volunteers running a hall kitchen near Church of All Saints, or anywhere in Churchill, may not know when the extract was last cleaned, and a grease test settles it. Bursars and site managers at schools such as Kingham Primary School tend to book extract cleaning for when the kitchen is empty.
Churchill is about 10 miles north-west of Witney, in Oxfordshire. We carry out ductwork cleaning for commercial premises of every kind in Churchill and the rest of Oxfordshire. Churchill is one of 443 towns, villages and districts in Oxfordshire where we work for commercial clients. We also work in Oxford, about 19 miles from Churchill.
Work in OX7 is surveyed, quoted and booked the same way as anywhere else. We cover sites on Hackers Lane, William Smith Close and Junction Road and nearby roads. If your site is just outside Churchill, we cover Sarsden (1 mile south-east), Salford (3 miles north), Chipping Norton (3 miles north-east), Over Norton (3 miles north-east) and Great Rollright (5 miles north-east). We also work in nearby towns such as Banbury (15 miles north-east), Witney (10 miles south-east), Carterton (10 miles south), Kidlington (15 miles south-east), Neithrop (14 miles north-east) and Ruscote (14 miles north-east).
Around Churchill
We work in commercial kitchens and buildings around The Chequers pub. Churchill’s nearest station is Kingham station, roughly 1.7 miles south-west of the centre. Well-known places in the area include Wheelbarrow Castle (4.5 miles north) and Chipping Norton Museum (2.7 miles north-east).
Places near Churchill
Also in Churchill
Churchill: your questions answered
Do you do school kitchen extract cleaning in Churchill in the summer holidays?
Yes, holiday work suits schools best. The FSA’s register shows about 2 schools and colleges with food registrations within roughly a mile and a half of Churchill. Booking early in the term gives the best choice of holiday dates.
Do you work overnight in Churchill?
Yes. We work evenings, overnight and at weekends. The site is handed back ready to open. Your opening times are the first thing we ask for.
How long does it take to clean extract ducts?
It takes a shift or more, depending on the length of the runs and the number of access points. The survey tells us how long your duct needs.
Do you work with multi-site operators?
Yes. One number covers all your sites in our area, with visits on a regular schedule.
What happens if there aren’t enough access panels?
Any section we can’t reach is recorded on the report, in line with TR19. We can fit new access panels so they’re cleaned next time.
How is kitchen extract ductwork cleaned?
We open each access panel and clean the section it reaches. Heavy grease comes out by hand, and what’s left is degreased, with readings taken before and after.
Are you accredited?
We hold CHAS, SafeContractor and ISO 9001, and we are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease. Vent Hygiene Elite is run by BESCA and independently audited.
How do you know if the ductwork needs cleaning?
We measure it. Readings are taken by Wet Film Thickness Test (WFTT) or Deposit Thickness Test (DTT). BESA guidance says the mean shouldn’t exceed 200 microns, and 500 or more anywhere needs immediate spot cleaning.
Multi-site and managed buildings
Running several sites is easier with one contractor. We work across London and the South East, so a run of sites can go into one programme and kept to a regular schedule.
Whether it’s one building or many, you get the same standard: the system surveyed, the price fixed, the visit fitted around trading and everything written up afterwards.
How it works
Your staff don’t need to do much on the day. Someone lets us in at the agreed time and shows us where everything is, and the rest is down to us. Before we leave, the area is tidied and the paperwork follows. Visits to a village like Churchill are booked in advance, at a time that suits whoever runs the site.
- Diagnosis: a survey of the duct’s route, size and access.
- A fixed quote follows, based on what we found.
- Each section is cleaned in turn through its access panel.
- We take extra care at bends and at the foot of risers.
- The duct is signed off with readings, photos and a next clean date.
Getting ready for the visit
- Clear the space around the work
- Make sure someone can let us in and lock up afterwards
- Agree a time when the area can be out of use
Ask for a quote
Quoting starts with a diagnosis, either from pictures and details you send or from a site visit. After that, you get a fixed price for the work, before we start.
Related advice
What we are called out for in Churchill
Grease filters that do not seal let fat straight through. More grease reaches the ductwork than it should and it fills faster.
Any of these means the system needs a check-up:
- Duct runs that can’t be reached
- Proof of duct cleaning for the insurer
- Fat dripping from the ductwork
- Years of grease along the duct floor
If your kitchen is in a listed or historic building, like the houses around Churchill (Chastleton House is about 3.8 miles north-west), fitting access panels needs care.
Comparing quotes
- Whether inaccessible sections are listed on the report
- Whether the figure could change on the day
- How VAT is shown on the quote
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
Part by part
Vertical risers
A riser takes the duct up through one or more floors. Grease collects on the walls and at the foot of the riser, which is one of the points we test.
Multi-storey and shared buildings
In a building with several floors, the duct may pass other tenants’ spaces. Access is planned with the building’s managers, so the clean is done safely and quietly.
What affects the quote in Churchill
Sites vary more than people expect. What affects the quote:
- Parking and loading at the site
- Site requirements such as sign-in and permits
- The condition of the system
- One-off work versus a regular cycle
What you pay reflects the actual work. That is why every job is surveyed first, and why the quote is fixed before we start.
Asking for a quote
When you call or email, these details help:
- When the site is open and when it’s quiet
- Any access panels or hatches you can see
- Photos showing the whole system and its surroundings
- Where the site is and what kind of site it is
We don’t publish a price list, because no two systems are the same. Instead, we look at your site first, from pictures or a survey, then send a fixed quote. To get going, give us a ring on 0345 646 2711 or email us.
When something else is needed
To be straight with you, some problems need a different fix:
- A damper stuck open in the duct
- Duct sections that need replacing
- A duct that is too small or badly routed for the kitchen (a design issue)
If in doubt, phone us on 0345 646 2711 or drop us a line and we’ll say what we think before you book.
Parts of the system we cover
- Horizontal duct runs
- Multi-storey ducts
- Bends and junctions
- Access panels
- Vertical risers
- Attenuators