Kent · Ductwork cleaning
Bekesbourne ductwork cleaning
Our technicians work in Bekesbourne on cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels. Out-of-hours visits, a fixed quote and a written report with pictures as standard.
- Smells of old cooking grease from the ductwork
- High readings at a recent grease test
- An insurer asking for TR19 evidence
Ductwork cleaning in Bekesbourne
Not every duct has enough access panels. Where a section can’t be reached, TR19 expects it to be recorded on the report, and we can fit new access panels so it’s cleaned next time. It’s better to know than to assume. The work covers attenuators, access panels and bends and junctions, and the jobs we see most are gaps where access panels were never fitted and grease leaking from duct joints.
For a kitchen in or near Bekesbourne, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
Our accreditations include CHAS, SafeContractor and ISO 9001, and we’re fully insured. On top of that, we’re a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we’ve been trading since 2009.
- Where
- Bekesbourne (CT4)
- Region
- Kent
- Records
- Certificate plus before-and-after photos
- Quote
- A fixed quote up front
- Working hours
- When your site is closed, plus a 24/7 line
- Telephone
- 0345 646 2711
- Reviewed
- 30 October 2026
Common questions in Bekesbourne
Which fire service covers Bekesbourne?
Kent Fire and Rescue Service is the fire and rescue service for Bekesbourne. TR19® is not law, but it’s the benchmark many fire officers and insurers look to when they ask how often the extract is cleaned.
Can you get to a site in Bekesbourne?
Yes, Bekesbourne is part of our area, however small the site. The journey is planned ahead, so a few details about the route help.
How often should kitchen ducts be cleaned?
The minimum depends on how long the kitchen cooks each day: every 3 months for 12 to 16 hours, 6 months for 6 to 12 hours and 12 months for 2 to 6 hours. Measured grease sets the real interval.
Can you fit access panels in our ductwork?
Yes, we install duct access panels. Panels go where they give the best access to sections that couldn’t be reached, and we will recommend where.
Which sectors do you work in?
We work for restaurants, pubs, hotels, schools, colleges, hospitals, care homes, offices and shops, plus food production and leisure sites.
Can you quote from pictures?
Often, yes. With good pictures, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
How can I tell if my extract ducts are dirty?
Start with the date of the last clean. If it’s overdue, or there is not one, a clean is due, and grease readings will confirm how urgent it is.
Can you set up regular visits?
Yes. Send details of the systems and how they’re used, and we’ll suggest a schedule and quote for it.
How the job changes from site to site
Attenuators and discharge
The last section of duct before the discharge is often the coolest, which can mean heavier deposits. It’s tested and cleaned along with the rest.
Access panels
After cleaning, every panel is closed and sealed, so grease and air stay inside the duct. A damaged panel is noted on the report.
Aftercare tips
Looking after the system between visits is straightforward, and it helps at the next visit:
- Never cook with a filter missing
- Diarise the next duct clean
- Leave a way through to the access panels
- Get panels fitted where the duct couldn’t be cleaned
The report names every part of the duct that couldn’t be reached and why. You can then decide whether to have access panels fitted.
Watch for warning signs between cleans: grease leaking from duct joints, smells, or a fan that sounds rough. Testing will show whether any section has reached 500 microns.
Why deal with it now?
Dealing with the ductwork in Bekesbourne now beats dealing with it after a problem. It takes a few hours for a short run, longer for long runs and tall risers, done out of hours so the kitchen keeps cooking. It’s worth booking a check, because nobody sees inside a duct day to day.
No two sites are the same, so each one gets its own fixed quote. Size, access, the condition of the system and when we can work all play a part.
What you get with us
- BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- One contact for all your sites in London and the South East
- Work around your opening hours, with 24/7 emergency cover
- Full insurance on every job
Take a look at what affects the cost or how to check a contractor.
What ductwork cleaning looks like in Bekesbourne
According to Food Standards Agency records, there are about 3 bars, pubs and nightclubs within about 1.5 miles of central Bekesbourne. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. The fire and rescue service for Bekesbourne is Kent Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. Kitchens in Bekesbourne get their food hygiene inspections from Canterbury City council. They look at how clean the premises and equipment are, and the kitchen extract is part of that. Our report lists what was cleaned and when, which is useful to have ready.
Healthcare kitchens can’t easily close, so their extracts are cleaned overnight or between meal services; the nearest hospital to Bekesbourne is St Martins Hospital, about 2.5 miles north-west. A kitchen near Bekesbourne station that serves breakfast and dinner can run its extract twelve hours or more, which shortens the cleaning interval. School kitchens, at schools like St. Anselm's Catholic School for example, are typically cleaned in the holidays so no lunches are lost.
Bekesbourne is about 3 miles south-east of Canterbury, in Kent. For ductwork cleaning in and around Bekesbourne, please phone us on 0345 646 2711, or email photos for a fixed quote. Our area covers London and the South East, including Bekesbourne. Across Kent, we cover 922 places, and Bekesbourne is one of them. Our Maidstone page covers sites nearby (27 miles or so).
All of CT4 is covered for ductwork cleaning, from the main roads to the quietest streets. Local streets include Aerodrome Road, Lysander Close and Adisham Road, and we cover them all for ductwork cleaning. We also cover the places around Bekesbourne: Patrixbourne (1 mile west), Bekesbourne Hill (1 mile north-west), Bridge (1 mile south-west), Littlebourne (2 miles north) and Adisham (2 miles south-east). Within a short drive, we also cover Ashford (15 miles south-west), Canterbury (3 miles north-west), Margate (13 miles north-east), Dover (10 miles south-east), Folkestone (12 miles south) and Ramsgate (13 miles north-east).
Near you in Bekesbourne
The closest station to Bekesbourne is Bekesbourne station, roughly 0.8 miles north-west of the centre. Well-known places in the area include Whitefriars Shopping Centre (3.5 miles north-west) and St Martins Hospital (2.5 miles north-west).
Multi-site and managed buildings
If you look after several sites, we can plan visits across the whole estate and price them together. Every building has its own written report, so records stay tidy.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We can quote either party and send the paperwork to whoever needs it.
What a clean will not put right
Not every problem is solved by ductwork cleaning, and we’ll tell you before work begins. It won’t put right:
- A damper stuck open in the duct
- A worn-out fan that needs replacing
- Duct sealed behind fixed ceilings or walls
Not sure which it is? You can phone us on 0345 646 2711 or email us and we’ll tell you honestly.
Parts of the system we cover
- Horizontal duct runs
- Access panels
- Bends and junctions
- Multi-storey ducts
- Vertical risers
- Attenuators
The process
We start by comparing what we find with the survey or your pictures. If anything is different, we talk it through with the person on site before carrying on. After that, the work takes a few hours for a short run, longer for long runs and tall risers. In a small place like Bekesbourne, the journey is planned ahead and the visit arranged around the site’s hours.
- Diagnosis: a survey of the duct’s route, size and access.
- You get a fixed price before work starts.
- Each section is cleaned in turn through its access panel.
- Bends, risers and the base of each riser get extra attention.
- Readings, photos and a recommended next clean date complete the job.
Getting ready for the visit
- Name a contact who can let us in at the agreed time
- Allow time for equipment near the work to be turned off and cool down
- Find the previous report, if there is one
Ask for a quote
The quickest way to a quote is to send photos: the system from a couple of angles, plus any access panels or hatches. Tell us what kind of site it is and when it’s open, and we can price many jobs without a visit.
Read more
Nearby places to Bekesbourne
Also in Bekesbourne
What affects the cost of ductwork cleaning
The price is fixed before any work begins. It takes into account:
- Site requirements such as sign-in and permits
- When the work can happen, such as evenings, overnight or weekends
- Where the site is and how we reach it
- One-off work versus a regular cycle
What you pay reflects the actual work. That is why every job is surveyed first, and the price is agreed before work begins.
What we need to know
There’s no need for technical detail. It helps if you can send:
- Your opening hours and when the area is out of use
- Detail shots of panels, filters and grilles
- The paperwork from the last visit, if you have it
- The postcode and the type of business
For a fixed quote, ring 0345 646 2711 or send us an email and tell us the type of site, your opening hours and roughly what the system looks like. A few pictures and your last certificate or report help a lot. We usually come back within one working day.