Kent · Ductwork cleaning
Ductwork cleaning in Bridge, Kent
Cleaning of kitchen extract ductwork, horizontal runs and vertical risers through access panels in Bridge, surveyed first and signed off with a written report and photos. Call for a fixed quote.
- Hardened, baked-on grease in long horizontal runs
- High readings at a recent grease test
- Sections of duct with no access panels
The process
We start by comparing what we find with the survey or your photos. If anything is different, we talk it through with the person on site before carrying on. From there, it takes from a few hours to more than one visit, depending on duct length and access. Visits to a village like Bridge are booked in advance, at a time that suits whoever runs the site.
- The duct route is surveyed and every access point found.
- We take grease readings along the route.
- Out of hours, the area is protected and the access panels opened.
- Thick grease is scraped out, then the runs and risers are degreased.
- Panels are closed, readings and photos repeated, and unreachable sections recorded.
Before we arrive
- Find the previous report, if there is one
- Let us know how we reach the system, including roofs, risers and plant rooms
- Move anything stored near the system
Get a fixed quote
For a fixed quote, call us on 0345 646 2711, or send details by email and tell us the type of site, your opening hours and roughly what the system looks like. A few photos and your last certificate or report help a lot. We typically come back within one working day.
Advice
Ductwork cleaning for kitchens and businesses in Bridge
Once air leaves the canopy, it travels through ductwork that most people never see. Every horizontal run and vertical riser collects grease along the way, and that’s where a kitchen fire can travel. Our ductwork cleaning reaches inside the runs and risers through access panels, to BESA TR19® Grease. The work covers vertical risers, access panels and bends and junctions, and the jobs we see most are proof of duct cleaning for the insurer and readings above 200 microns from a grease thickness test.
Rural kitchens often have long, low duct runs through a roof space or along an outside wall, where grease settles in the flat sections. Access, parking and timings are agreed before the day.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We are also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Location
- Bridge (CT4)
- Wider area
- Kent
- Records
- Certificate plus before-and-after pictures
- Quote
- A fixed quote up front
- When we work
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
Towns and villages near Bridge
More services for Bridge
Looking after it afterwards
Once we’ve finished, these simple steps help:
- Never cook with a filter missing
- Keep access panels clear of stored items
- Don’t switch the extract off early
- Have the grease measured if cooking hours go up
Keep the certificate and report with the fire risk assessment. An insurer, fire officer or EHO may ask to see it, and the pictures make the duct’s condition easy to see.
Run the extract the whole time the kitchen is cooking. When the air stops, grease settles in the duct, so switching off early adds to the build-up.
How the job changes from site to site
Multi-storey and shared buildings
A fire in a duct in a shared building can affect far more than one kitchen, so the responsible person has more reason to keep it clean. Your certificate and report give building managers the record they need.
Access panels
Panels have to seal properly once they’re closed, so grease and air stay inside the duct. We’ll tell you if any panel needs replacing.
Honest limits
Not every problem is solved by ductwork cleaning, and we’d rather say so up front. It won’t put right:
- Duct sections that need replacing
- Ductwork that was poorly designed
- A failed fan motor at the end of the duct (a fan repair job)
If you are not sure, just call 0345 646 2711, or email photos and we’ll give you a straight answer.
What the work covers
- Horizontal duct runs
- Multi-storey ducts
- Access panels
- Attenuators
- Vertical risers
- Bends and junctions
Kitchen extracts in Bridge
The FSA’s food hygiene register shows about 4 cafés, restaurants and staff canteens in Bridge and the streets around it, up to about 1.5 miles out. Each kitchen that cooks under a canopy sends grease-laden air into a duct, where it cools and settles. Kent Fire and Rescue Service covers Bridge. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order. Environmental health officers from Canterbury City council inspect food businesses in Bridge. The cleanliness of the kitchen and its equipment, extraction included, is part of what they check. Our report lists what was cleaned and when, which is useful to have ready.
Volunteers running a hall kitchen near Church of St Peter, or anywhere in Bridge, may not know when the extract was last cleaned, and a grease test settles it. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Kent and Canterbury Hospital is the nearest hospital to Bridge, about 2.1 miles north-west.
Bridge is about 3 miles south-east of Canterbury, in Kent. Sites in Bridge get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Bridge is one of 922 towns, villages and districts in Kent we cover for ductwork cleaning. There’s also a page for Maidstone, about 26 miles away.
Here we cover the CT4 postcode area for ductwork cleaning. Local streets include High Street, Station Road and Western Avenue, and we cover them all for ductwork cleaning. Neighbouring places we cover for ductwork cleaning include Patrixbourne (1 mile north-east), Bishopsbourne (1 mile south), Bekesbourne Hill (1 mile north-east), Bekesbourne (1 mile north-east) and Kingston (2 miles south-east). Within a short drive, we also cover Ashford (13 miles south-west), Canterbury (3 miles north-west), Margate (15 miles north-east), Dover (11 miles south-east), Folkestone (11 miles south) and Ramsgate (14 miles north-east).
What’s near Bridge
Typical jobs here are in premises near The Bridge Arms and St. Anselm's Catholic School, among other places. The nearest railway station is Bekesbourne station, roughly 1.2 miles north-east of the centre. Well-known places in the area include Canterbury Roman Museum (2.9 miles north-west) and Kent and Canterbury Hospital (2.1 miles north-west). Green spaces nearby include Blean Woods RSPB Reserve.
What we are called out for in Bridge
A duct with too few access doors can’t be fully cleaned. Sections between panels go uncleaned, sometimes since the system was installed, and the grease there keeps building out of sight.
Signs it’s time to call us include:
- Gaps where access panels were never fitted
- A duct clean needed for an insurer
- Heavy grease at the base of a riser
- Ductwork that has never been cleaned
For schools such as Bridge and Patrixbourne Church of England Primary School, kitchen extract cleaning is typically booked for the holidays, when the canteen is closed.
Before booking anyone
- Whether VAT is included
- If they look at the system before pricing
- Whether the price is fixed
- Proof of accreditation you can verify
What your team can do, and what needs us
In-house cleaning and specialist cleaning do different jobs. Wiping filters daily and washing them weekly keeps the visible parts in order, but grease that has passed the filters is out of reach. That part needs specialist access and equipment.
Staff cleaning doesn’t replace a specialist visit; it supports it. Regular in-house cleaning slows the build-up, but hidden parts of the system still need specialist attention.
FAQs for Bridge
Is Bridge within the area you cover?
Yes, smaller places are covered as well as towns. Let us know about access, parking and anything unusual about getting there when you book.
Can you come to Bridge after we close?
Yes, nights and weekends are routine for us. The work in Bridge can fit around your hours. Let us know the hours you are closed and we will book within them.
Who is the responsible person?
Under the Regulatory Reform (Fire Safety) Order 2005, it’s the responsible person: normally the employer or whoever controls the premises. Landlords, facilities managers and managing agents can also hold responsibility.
What do you do with what you remove?
It’s contained and taken away. Grease, debris and waste water are collected as the work goes on, so it does not spread.
How often does extract ductwork need cleaning?
It follows the same interval as the whole extract, ranging from 3-monthly to 12-monthly. Grease thickness testing shows whether that’s often enough.
What’s TR19?
BESA’s ventilation hygiene specification, with two parts that matter most here: TR19® Grease for kitchen extract systems and TR19® Air for general ventilation. It is not legislation, but it’s the standard people check against.
What does ductwork cleaning cost?
We do not publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. We fix the price before we start.
Can you quote from pictures?
In many cases, yes. With good pictures, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
How we price ductwork cleaning
The quote reflects the site in front of us. We take into account:
- Whether we need access equipment or extra panels
- Any permits to work or inductions
- How many systems or sites are involved
- Parking and loading at the site
Combining work into one visit or one programme can make for a more efficient booking. Tell us about everything you’d like looked at, and you will get one fixed quote.
What to send for a quote
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Wide photos of the system and the area around it
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The roof, plant room or outside wall the system runs to
- Any access panels or hatches you can see
Quotes are quick. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.