Kent · TR19 inspections and grease testing
TR19 inspections in Yorkletts
One call covers TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification in Yorkletts: survey, fixed quote, work and sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Extracts that have never been grease tested
- An insurer’s request for a TR19 audit
- Uncertainty over how often to clean
How we handle TR19 inspection in Yorkletts
Before any clean in Yorkletts, we survey the canopy, plenum, filters, ducts, fan and discharge. We check where the access panels are and whether every section can be reached, and record grease readings at set points. We’re often asked to deal with cleaning intervals that may not suit the kitchen and kitchens taken over with no cleaning records, across post-clean checks, access surveys and insurer audits.
In a village or hamlet like Yorkletts, the kitchens that need extract cleaning are usually a pub, a school, a care home or a hall kitchen, wherever there is one. Every one of them still needs its extract kept clear of grease.
The paperwork matters as much as the work. Each visit is written up with pictures, covering the work done, any areas we couldn’t access and a recommended next date. Keep it with your fire safety records so it’s to hand when an insurer or inspector asks.
- Where
- Yorkletts (CT5)
- Wider area
- Kent
- Paperwork
- TR19® certificate and photo report
- Price
- A fixed quote up front
- Working hours
- Evenings, overnight and weekends; 24/7 emergencies
- Call
- 0345 646 2711
- Checked
- 30 October 2026
FAQs for Yorkletts
Can sea air affect TR19 inspection in Yorkletts?
It can. Yorkletts is within about 2 miles of the coast, and salt air speeds up corrosion. Corroded fixings and housings are noted on the report so they can be dealt with.
Can the work in Yorkletts be done at night or at weekends?
Yes, we can come after you close and finish before you open. The work in Yorkletts can fit around your hours. Tell us your opening hours when you ask for a quote.
How much does TR19 inspection cost in Yorkletts?
We don’t publish prices, because the cost depends on the job: the size of the system, its condition, access and when we can work. You get a fixed price before we start.
How do you measure grease in a kitchen extract?
WFTT and DTT are the two methods for measuring grease thickness, in microns. We take readings at set points from canopy to fan.
Can you quote from pictures?
Yes, where the pictures show enough. If not, a site survey comes first, then a fixed quote.
Is Yorkletts in your area?
Yes. We work in Yorkletts and across Kent, within our South East and London area. To book, call us on 0345 646 2711 or email us.
How do you protect the area?
We cover floors and nearby surfaces with sheeting before we start, and waste is contained as we go. Before we leave, we tidy up and clean down.
How long does grease testing take?
Testing takes around an hour or two per canopy and duct system. Large or multiple systems take longer, so phone us on 0345 646 2711 or email us and we will plan it.
Why act early in Yorkletts
A check after cleaning shows whether the work reached every part it should have, before the next clean is due. In a place like Yorkletts, ductwork and fans are easy to forget until something goes wrong.
You will not find a price list here, because each job is priced on what it involves. For a fixed quote, call us on 0345 646 2711, or send details by email, and we’ll explain what it covers.
What you get with us
- Member of BESCA Vent Hygiene Elite, cleaning to BESA TR19® Grease
- CHAS, SafeContractor and ISO 9001
- Fully insured
- In business since 2009
Take a look at our cost guide and how to check a contractor.
Landlords, agents and facilities managers
Multi-site operators often want one contractor and one number. We cover South East England and London, so a run of sites can go into one programme and kept to a regular schedule.
Managing agents often deal with us directly. Tell us the site, the work and the access arrangements, and we’ll send a fixed quote.
The process
A visit follows the same order every time: sheeting and protection first, isolate whatever needs isolating, do the work, tidy up and leave you the report. On site, the work takes a couple of hours for a typical kitchen extract system. The timing of a visit to Yorkletts is set by you, and the travel is our side of the planning.
- Post-clean verification is booked once the clean is done.
- The same access points are opened up.
- We repeat the WFTT or DTT readings.
- We photograph each area to record how it was left.
- We report the findings and flag any areas that need more work.
Before we arrive
- Let us know when the site is closed or quiet
- Find the previous report, if there is one
- Tell us about site rules, permits or sign-in
Ask for a quote
For a fixed quote, give us a ring on 0345 646 2711 or email us with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You will normally have a quote within one working day.
Advice
Fixed quotes for TR19 inspection in Yorkletts
We do not publish a price list, because sites vary so much. What we look at:
- Whether we need access equipment or extra panels
- Whether it’s a one-off visit or part of a schedule
- The times the site is available
- Travel, parking and unloading
When the work has to happen, how we reach it and how big the site is all affect the cost. Each of those is built into the quote and give you a fixed price before we start.
Asking for a quote
Photos let us diagnose from a distance. The most useful are:
- The site address and the type of premises
- Wide pictures of the system and the area around it
- The times we could work without disrupting the site
- Where the plant sits or the system leaves the building, such as a roof or outside wall
Every quote begins with a look at the system, from your photos and details or, where that isn’t enough, a survey on site. Then we send a fixed price, before we start.
Nearby places to Yorkletts
Other services in Yorkletts
What a clean will not put right
An honest diagnosis matters more to us than a booking, so here’s what this work can’t put right:
- Removing the grease, which is a separate clean
- A faulty or failing extract fan
- Design faults in the extract system
If you are not sure, just phone us on 0345 646 2711 or send us an email and we will give you a straight answer before you book.
Where we work
- Wet film thickness tests
- Access surveys
- Deposit thickness tests
- Post-clean checks
- Pre-clean surveys
- Insurer audits
What staff can safely do
Staff cleaning and specialist work aren’t the same thing. Wiping filters daily and washing them weekly keeps the visible parts in order, but they don’t reach the grease that builds up further in. That part needs specialist access and equipment.
A few tasks are always specialist work: entering ducts, working on fans, testing dampers and taking grease readings call for the right kit, training and safe access. That is our job.
Grease, kitchens and Yorkletts
Yorkletts lies within about 2 miles of the sea. Near the sea, the fan and discharge at the top of a kitchen extract corrode faster than they would inland. The Food Standards Agency lists about 4 pubs and bars as registered food businesses in and around Yorkletts, up to about a mile and a half out. Any of them serving cooked food has an extract to keep clean, from canopy to discharge. Kent Fire and Rescue Service covers Yorkletts. The Fire Safety Order puts the duty on whoever runs a kitchen to control its fire risk, and a greasy duct is fuel.
Healthcare kitchens, like those at hospitals such as Whitstable and Tankerton Hospital (about 3.2 miles north-east), often cook for long hours, which puts them in BESA’s heavier-use bands. Church and community hall kitchens, near St Alphege or anywhere around Yorkletts, are easy to forget, but their extracts collect grease like any other.
Yorkletts is about 2 miles south-west of Whitstable, in Kent. From the centre of Yorkletts to the outskirts, we cover TR19 inspection for every kind of premises, from small sites to large estates. Yorkletts is one of 922 places in Kent where we work for commercial clients. You can also see our page for Maidstone, roughly 21 miles from Yorkletts.
TR19 inspection in CT5 follows the same survey, fixed quote and written report as everywhere else we cover. Whether your site is on Ford Walk, Glen Walk and Coombe Walk or anywhere close by, our technicians can take on the work. We also cover the places around Yorkletts: Denstroude (1 mile south-east), Honey Hill (2 miles south-east), Whitstable (2 miles north-east), Blean (2 miles south-east) and Radfall (3 miles east). Within a short drive, we also cover Ashford (14 miles south-west), Canterbury (5 miles south-east), Sittingbourne (12 miles west), Faversham (5 miles west), Herne Bay (6 miles north-east) and Minster (11 miles north-west).
Around Yorkletts
Typical jobs here are in premises near Foxes Cross Bottom and the streets around them. The closest station to Yorkletts is Whitstable station, about 2.6 miles north-east. Well-known places in the area include Tankerton Castle (2.9 miles north-east) and Whitstable and Tankerton Hospital (3.2 miles north-east). Not far away are Blean Woods RSPB Reserve.
Do you need TR19 inspection in Yorkletts?
Some parts of a system are hard to reach, so those sections can be skipped time and again. A survey finds the sections that can’t be reached, so panels can be fitted.
Clients usually contact us after spotting one of these:
- Ductwork where grease may be over the TR19 limits
- Uncertainty over how often to clean
- Kitchens taken over with no cleaning records
- An insurer’s request for a TR19 audit
Term dates shape school work: for a school like The Whitstable School, an extract clean fits neatly into a half-term or summer break.
What your quote should include
- Whether the quote is based on a survey or pictures
- Their accreditations, such as BESCA Vent Hygiene Elite, CHAS or SafeContractor
- Whether the quote shows VAT
- When they can work, and whether that’s outside your opening hours