Portsmouth · TR19 inspections and grease testing
TR19 Inspection in Tipner
Specialist TR19 inspection for Tipner: diagnosis first, then a fixed quote, the work and a report with photos. Call for a fixed quote.
- Post-clean verification after another contractor’s clean
- Kitchens taken over with no cleaning records
- Heavy grease suspected in the plenum or ducts
Managing agents and facilities teams in Tipner
We also work for facilities teams across offices, schools and healthcare in Tipner and across Portsmouth. Work can be phased by floor, building or site around the people who use them.
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
About our TR19 inspection in Tipner
Grease thickness testing tells you how much grease is sitting in the canopy, ducts and fan. Readings are taken at set points using the Wet Film Thickness Test (WFTT) or the Deposit Thickness Test (DTT). From the numbers, you can see whether cleaning is due. Typical jobs include systems that need surveying before cleaning and uncertainty over how often to clean, across post-clean checks, insurer audits and deposit thickness tests.
In a smaller place like Tipner, many kitchens sit in older buildings or later extensions, where the duct may cross a roof void or climb an outside wall. Flat runs collect grease and need proper access to clean.
We’re CHAS and SafeContractor accredited, we hold ISO 9001 and we’re fully insured. We’re also a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, trading since 2009.
- Location
- Tipner (PO2)
- Region
- Portsmouth
- Paperwork
- TR19® certificate and photo report
- Quote
- Fixed quote, normally within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Checked
- 30 October 2026
What staff can safely do
Some jobs should never be done in-house: entering ducts, working on fans, testing dampers and taking grease readings need training, the right equipment and safe access. Leave those to us.
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, next to our reports.
Signs you need TR19 inspection in Tipner
Some parts of a system are hard to reach, so those sections can be skipped time and again. A survey finds the sections that cannot be reached, so the gaps can be closed.
Any of these means the system needs a check-up:
- Heavy grease suspected in the plenum or ducts
- Surveys needed before quoting a full clean
- Insurers asking for TR19 evidence
- Sites with gaps in their extract records
Term dates shape school work: for a school like Stamshaw Infant Academy, an extract clean fits neatly into a half-term or summer break.
Comparing quotes
- Whether inaccessible sections are listed on the report
- Whether VAT is included
- Proof of insurance
- When they can work, and whether that’s outside your opening hours
The process
Before we leave, we walk the area with whoever is on site. We point out anything that couldn’t be reached or needs a follow-up, and it goes on the report too. All told, the work takes around an hour or two per canopy and duct system. Tell us about any gates, ladders or locked plant areas at your site near Tipner when you book.
- After the clean, we arrange a time to check the system.
- We open the access points used on the clean.
- We repeat the WFTT or DTT readings.
- We photograph each area to record how it was left.
- We report the findings and flag any areas that need more work.
Getting ready for the visit
- Tell us where we can park and unload
- Tell us the best time to work, such as after service or at a weekend
- Mention any sign-in, permit or induction we need
How to get a quote
Photos are the quickest way to a quote: wide shots of the system, close-ups of anything that worries you and how we’d get to it. Tell us what kind of site it is and when it’s open, and many jobs can be priced from that alone.
Related advice
Leave it or put it right?
Don’t wait for an EHO visit or insurance renewal to find gaps in your extract records. An inspection now gives a site in Tipner a current picture. A visit arranged in advance is far less disruptive than a callout on a busy day.
A single site or a whole portfolio, the quote is built the same way: the work involved, the access and the timing. You’ll have a fixed price before work begins.
Why book with us
- Fixed quotes, usually within one working day
- Evenings, overnight and weekends, plus 24/7 emergency callout
- Survey first, then a fixed quote
- We are fully insured
See our cost guide and our accreditations.
What TR19 inspection looks like in Tipner
Sea air reaches Tipner, which sits within about 1 mile of the coast. Metal on the roof weathers faster close to the coast, and the extract fan and cowl are no exception. Food Standards Agency data counts about 119 restaurants, cafés and works canteens and about 97 takeaways in Tipner and the streets around it, up to about 1.5 miles out. Each kitchen extract among them can be measured for grease to set the right cleaning interval. Fire safety in Tipner falls to Hampshire and Isle of Wight Fire and Rescue Service. In most workplaces, including commercial kitchens, it’s the fire and rescue authority that enforces the Fire Safety Order.
A hospital like Royal Portsmouth Hospital, about 1.2 miles south, is the kind of site where a kitchen may cook for patients, staff and visitors all day. Where a hall near St Saviour's Church, or anywhere in Tipner, hosts lunch clubs or events, its extract gathers grease just as a café’s does.
Tipner is about 1 mile north-west of Portsmouth, in Portsmouth. Sites in Tipner get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. 19 places in Portsmouth are on our list, large and small.
Every address in PO2 is within our area for TR19 inspection, from busy streets to back roads. Whether your site is on Knox Road, Croft Road and Whaley Road or a nearby road, we can help. Tipner sits on or near the M275 and A2047, so getting to you is simple for evening and night visits. If your site is just outside Tipner, we cover North End (1 mile east), Rudmore (1 mile south-east), Portsmouth (1 mile south-east), Landport (1 mile south) and Hilsea (1 mile north-east).
Around Tipner
Typical jobs here are in premises near St Edmund's Catholic School, Mother Shipton pub and Mayfield School, among other places. The closest station to Tipner is Portsmouth & Southsea station, roughly 1.4 miles south. Nearby you will also find Charles Dickens Birthplace Museum (0.8 miles south) and Portchester Castle (1.8 miles north-west). Green spaces nearby include Milton Locks and Portsdown Hill.
What TR19 inspection can’t fix
Some problems need a different service or another trade:
- A faulty or failing extract fan
- Parts of the duct nobody can reach yet
- The legal duty, which stays with the responsible person
If you’re not sure, just call 0345 646 2711, or send details by email and we will give you a straight answer.
Where we work
- Access surveys
- Post-clean checks
- Wet film thickness tests
- Deposit thickness tests
- Pre-clean surveys
- Insurer audits
More services for Tipner
Tipner questions
Who inspects food businesses in Tipner?
In Tipner, it’s Portsmouth council that carries out food hygiene inspections. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Do you work in villages like Tipner?
Yes. Tipner is within the area we cover across London and the South East. Photos of the system and directions to the site help us plan the visit.
What do you do to protect the area?
We start with protection: floor sheeting and covers over nearby surfaces and equipment. The area is left tidy, with our waste taken away.
Do you look at the system first?
Yes, every time. Diagnosis comes before treatment: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Can you price the work without visiting?
In many cases, yes. With good pictures, the site type and your last report, we can price many jobs. Larger or hidden systems need a survey on site first.
How much does TR19 inspection cost in Tipner?
The cost depends on the size of the system, its condition, access and timing. Call for a fixed quote, normally ready within one working day.
What about areas you cannot get to?
They’re listed in the report, never skipped quietly. You’ll know exactly which parts weren’t reached and why, and we can quote to improve the access.
Which sectors do you work in?
Any commercial site with kitchens or ventilation, from a small pub to a hospital. We work with hotels, schools, care homes, offices, retail and leisure sites.
What affects the quote in Tipner
We quote each job individually. This is what makes a difference:
- Where the site is and how we reach it
- The times the site is available
- How easy every part is to reach
- Whether several sites go on one quote
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered and we will price it together.
What we need to know
There’s no need for technical detail. Just send:
- Where the plant sits or the system leaves the building, such as a roof or outside wall
- Photos showing the whole system and its surroundings
- Close-ups of filters, grilles, hatches or access panels
- The postcode and the type of business
Quotes are quick. Send a few details and photos, and we usually reply with a fixed quote within one working day. If we need to see the system first, we book a survey around your hours.