Kent · TR19 inspections and grease testing
TR19 inspections and grease testing in Studdal, Kent
TR19 inspection in Studdal from ventilation hygiene specialists trading since 2009. Out-of-hours visits and 24/7 emergency callout.
- Extracts that have never been grease tested
- Parts of the system left out of past cleans
- An insurer’s request for a TR19 audit
TR19 inspection for kitchens and businesses in Studdal
TR19® Grease says grease should not exceed a mean of 200 microns between cleans, and 500 microns or more at any point needs immediate spot cleaning. Testing is how you know where your system stands. Common call-outs are for insurers asking for TR19 evidence and systems that need surveying before cleaning, across wet film thickness tests, access surveys and post-clean checks.
For a kitchen in or near Studdal, the visit is planned around opening hours and the journey, and the clean itself is the same full TR19® job as in any town: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
A written report with photos follows each visit, so there’s a dated record of the work. Kitchen extract cleaning to TR19® Grease is certificated through the BESCA Vent Hygiene Elite portal.
- Where
- Studdal (CT15)
- Region
- Kent
- Paperwork
- Certificate and photo report
- Quote
- Fixed quote, normally within a working day
- Hours
- Evenings, overnight and weekends; 24/7 emergencies
- Telephone
- 0345 646 2711
- Page updated
- 30 October 2026
What happens if it’s left?
Skipping grease testing leaves the cleaning interval to guesswork. If grease reaches 500 microns anywhere, TR19® Grease calls for immediate spot cleaning, which you won’t know without measuring. Out of sight is the usual reason a rural system goes too long without attention.
Combining work into one visit or one programme often makes better use of the time. Mention every system or site you need covered and we will price it together.
Why us?
- One contact for all your sites in London and the South East
- Work around your opening hours, with 24/7 emergency cover
- In business since 2009
- Full insurance on every job
Take a look at our cost guide and how to check a contractor.
Landlords, agents and facilities managers
We also work for facilities teams across offices, schools and healthcare in Studdal and across Kent. Work can be phased by floor, building or site to keep disruption down.
Running several sites is easier with one contractor. We cover South East England and London, so visits at different addresses can be planned together and kept on a regular cycle.
The process
Your trading hours come first. We book the visit for a time the area is closed, whether that is an evening, overnight or a weekend. Once we are in, the area is sheeted and anything that has to be off is turned off and cooled, and the job takes anything from an hour for a small canopy and short duct to a good part of a day for a large site. A quick note on how to find the site and where to park makes a visit to Studdal run smoothly.
- After the clean, we arrange a time to check the system.
- The same access points are opened up.
- We repeat the WFTT or DTT readings.
- We photograph each area to record how it was left.
- The results are reported, with anything missed flagged.
Getting ready for the visit
- Let us know about parking and loading
- Let us know how we reach the system, including roofs, risers and plant rooms
- Move anything stored near the system
How to get a quote
Quoting starts with a diagnosis, either from photos and details you send or from a site visit. Then we send a fixed price so you know the cost before work begins.
Read more
What your team can do, and what needs us
Day-to-day cleaning is something your team can do: wiping down canopy surfaces, cleaning filters and keeping a simple log. What they cannot safely do is clean inside the ductwork, the fan or the risers, and that is where we come in.
Logging matters as much as cleaning. A simple log of filter washes, wipe-downs and checks shows an inspector that the system is looked after between visits, alongside our reports.
Different parts, different methods
Schools, hospitals and care homes
Inspections are planned around mealtimes and holidays to avoid disruption.
Horizontal duct runs
Flat duct runs collect grease along their base. Readings are taken along each run through its access panels.
Nearby places to Studdal
What else we do in Studdal
Fixed quotes for TR19 inspection in Studdal
Sites vary more than people expect. The main factors:
- When the work can happen, such as evenings, overnight or weekends
- How easy every part is to reach
- Site rules, permits and inductions
- Where the site is and how we reach it
We don’t list prices on the website, because the cost depends on the site in front of us. For a fixed quote, call 0345 646 2711, or email photos, and we’ll talk you through it.
What we need to know
What to send for a quote:
- Any symptoms, from odd noises to smells or leaks
- Any previous report or certificate
- When the site is open and when it’s quiet
- A few general shots of the system
There’s no standard price list, because no two systems are the same. Instead, we look at your site first, from photos or a survey, and then give you a fixed quote. To get going, phone us on 0345 646 2711 or drop us a line.
Questions from Studdal
Will you come out to Studdal?
Yes, smaller places are covered as well as towns. Just mention lanes, gates or anything else about the site when you book.
Who enforces fire safety at workplaces in Studdal?
Fire safety enforcement in Studdal is handled by Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Can we book visits on a schedule?
Yes. Tell us what you have and how it’s used and we’ll propose a schedule with a fixed quote.
Do you have a 24/7 line?
Yes, any time. For anything urgent, such as a fan failure or damage after a fire, ring the 24/7 line and we will talk you through the next steps.
What does TR19 inspection cost?
Every site is different, so each gets its own fixed quote. For a quote, call 0345 646 2711, or email photos with the site type, opening hours and a few pictures.
Is TR19 cleaning the law?
No, not in itself. But the responsible person must assess and reduce fire risk under the Fire Safety Order 2005, and grease in the extract is part of that. Many insurance policies also require TR19 adherence.
Which sectors do you work in?
Any site with a kitchen or a ventilation system to look after, from a small pub to a hospital. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
How do you keep the site clean during the work?
By covering it before any work starts. The work is kept contained and clean down when we finish.
Between visits
Here’s the after-treatment advice, short and simple:
- Flag changes in how much frying the kitchen does
- Don’t box in or cover duct access panels
- File every inspection report with your certificates
- Look out for grease drips round the canopy edge
Each report suggests the next clean and the next test, from the measured grease and the kitchen’s hours.
Keep filters clean and in place. Gaps around filters let grease get past them.
Studdal kitchens: local notes
Environmental health officers from Dover council inspect food businesses in Studdal. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A dated certificate in the maintenance file answers the question before it’s asked. Studdal sits within the area of Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Walmer Castle is about 4 miles east), access may need planning. Where a hall near East Studdal Church Hall, or anywhere in Studdal, hosts lunch clubs or events, its extract gathers grease just as a café’s does. Healthcare kitchens, like those at hospitals such as Buckland Hospital (about 4.3 miles south), often cook for long hours, which puts them in BESA’s heavier-use bands.
Studdal is about 4 miles north of Dover, in Kent. If you need TR19 inspection in Studdal, it’s easy to get a fixed quote: please call 0345 646 2711, or send details by email. Our area covers London and the South East, including Studdal. Studdal is one of 922 places in Kent where we work for TR19 inspection. We also work in Maidstone, around 34 miles away.
All of CT15 is within our area for TR19 inspection, from the main roads to the quietest streets. That includes premises on Chapel Lane, Homestead Lane and Northdowns Close and nearby roads. We also cover the places around Studdal: Ashley (1 mile south-west), East Studdal (1 mile north-east), West Langdon (1 mile south), Sutton (1 mile east) and Martin (2 miles south-east). Further out, we also cover Canterbury (12 miles north-west), Margate (13 miles north), Dover (4 miles south), Folkestone (10 miles south-west), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Around Studdal
Studdal’s nearest station is Martin Mill station, roughly 2.3 miles south-east. Nearby you will also find Walmer Castle (4 miles east) and Dover Transport Museum (3.2 miles south).