Kent · TR19 inspections and grease testing
TR19 Inspection in Sandhurst Cross
Specialist TR19 inspection for Sandhurst Cross: a survey, a fixed price, careful work and proper paperwork. Call for a fixed quote.
- Cleaning intervals that may not suit the kitchen
- Systems cleaned on a calendar with no measurements
- Post-clean verification after another contractor’s clean
About our TR19 inspection in Sandhurst Cross
Insurance policies often require evidence of TR19® cleaning and inspection. Missing records can lead to a claim being reduced or refused. A TR19 audit sets out the system’s condition, with readings and photos, for sites in Sandhurst Cross and the rest of Kent. Common call-outs are for kitchens whose menu or hours have changed and an insurer’s request for a TR19 audit, on deposit thickness tests, insurer audits and pre-clean surveys.
In a village or hamlet like Sandhurst Cross, the kitchens that need extract cleaning are normally a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease, whatever the size of the place.
It’s worth checking any contractor’s accreditations. We are a BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease, and we hold CHAS, SafeContractor and ISO 9001, with full insurance on top.
- Location
- Sandhurst Cross (TN18)
- Region
- Kent
- Records
- TR19® certificate and photo report
- Quotes
- A fixed quote up front
- Working hours
- After hours by arrangement; emergencies any time
- Call
- 0345 646 2711
- Checked
- 30 October 2026
What happens if it’s left?
Finding a hotspot early means a targeted spot clean rather than a bigger problem later. Ignored, the layer only gets thicker. Rural sites cannot always move to another kitchen or room when something fails.
What you pay reflects the actual work. That’s why we survey first, from photos or on site, and the price is agreed before any work starts.
Why Sandhurst Cross businesses choose us
- Each visit written up, with photos
- A BESCA Vent Hygiene Elite member, cleaning to BESA TR19® Grease
- Fully insured
- In business since 2009
How it works
The first job on site is protection: floors, worktops and anything near the work are covered. After that, the system is made safe and the work begins. It takes an hour or two for a single kitchen, longer for a large or complex system, and the area is cleaned down before we leave. In a small place like Sandhurst Cross, the journey is planned ahead and the visit arranged around the site’s hours.
- First we look at the system’s cleaning history, if there is one.
- We follow the extract from canopy to discharge.
- Access panels are located and any missing ones noted.
- We measure the grease and photograph each point.
- We report back with readings and a fixed quote.
Preparing for the visit
- Tell us about site rules, permits or sign-in
- Let us know about parking and loading
- Clear the space around the work
Get a fixed quote
Here’s what helps us quote: where the site is, what it is and its opening hours, photos of the system and the last certificate or report, if there is one. Once you have those, call us on 0345 646 2711 or email us.
Read more
Sandhurst Cross kitchens: local notes
At about 43 miles from central London, Sandhurst Cross sits well inside the area we cover. A survey and a fixed quote come first, then the visit at a time that suits you. Sandhurst Cross sits within the area of Kent Fire and Rescue Service. Grease in a kitchen extract is a recognised fire risk, and the fire authority enforces the law on managing it in most commercial premises.
A hall kitchen that only cooks for events, whether near Church of St Nicholas or elsewhere in Sandhurst Cross, still needs its extract cleaned, just less often. A hospital like Benenden Hospital, about 5.4 miles north-east, is the kind of site where a kitchen may cook for patients, staff and visitors all day. Term dates shape school work: for a school like Sandhurst Primary School, an extract clean fits neatly into a half-term or summer break.
Sandhurst Cross is about 11 miles north of Hastings, in Kent. Sites in Sandhurst Cross get the same service as everywhere we cover: a survey first, a fixed quote, work timed around your hours and a report with pictures. Sandhurst Cross is one of 922 towns, villages and districts in Kent we cover for commercial clients. There’s also a page for Maidstone, roughly 17 miles from Sandhurst Cross.
We work across the TN18 postcode area for TR19 inspection and the streets around it. Local streets include Church Road, Bodiam Road and Bourne Lane, and we cover them all for TR19 inspection. We also cover the places around Sandhurst Cross: Sandhurst (1 mile north-east), Bodiam (1 mile south-west), Little Conghurst (1 mile north-west), Four Throws (1 mile north-west) and Linkhill (2 miles east). Further out, we also cover Royal Tunbridge Wells (15 miles north-west), Paddock Wood (13 miles north-west), Tenterden (7 miles north-east), Park Wood (15 miles north), Staplehurst (10 miles north) and Stanhope (15 miles north-east).
Local landmarks in Sandhurst Cross
Around Sandhurst Cross, our work takes us to kitchens and buildings near Bodiam Manor School and Old Tavern, among other places. Sandhurst Cross’s nearest station is Robertsbridge station, about 4.3 miles south-west of the centre. Nearby you’ll also find Benenden Hospital (5.4 miles north-east).
Part by part
Restaurants, pubs and hotels
Inspections are done when the kitchen is closed or quiet so trading isn’t affected.
Vertical risers
Risers in multi-storey buildings can pass through other areas, so we arrange access ahead of time.
How we price TR19 inspection
Some jobs are bigger than they look, and some smaller. The main factors:
- How easy every part is to reach
- The times the site is available
- The number of sites or systems
- Parking and loading at the site
The cost depends on the size of the system, what state it’s in and how easy it is to reach. You get a fixed price before we start, so there are no surprises.
Asking for a quote
We can often survey from photos. Try to include:
- Anything you’ve noticed, such as smells, noise, drips or poor airflow
- The postcode and the type of business
- Detail shots of panels, filters and grilles
- When the site is open and when it’s quiet
Photos are enough for some jobs, while others need a look on site. Larger sites, and anything hidden behind walls, ceilings or floors, are normally surveyed first. Either way, you get a fixed price before work begins.
Staff cleaning versus specialist work
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but hidden parts of the system still need specialist attention.
Logging matters as much as cleaning. A dated log of in-house cleaning and checks helps show that the system is managed between specialist visits, next to our reports.
Sandhurst Cross questions
Who would carry out a food hygiene inspection at a kitchen in Sandhurst Cross?
In Sandhurst Cross, it’s Rother council that carries out food hygiene inspections. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
Which fire and rescue service is responsible for Sandhurst Cross?
Sandhurst Cross is in the area of Kent Fire and Rescue Service. If a fire safety officer visits a commercial kitchen, they may ask about the fire risk assessment and how the extract is kept clean.
Is a quote from pictures possible?
Yes, if we can see what we need. If not, a site survey comes first, then a fixed quote.
What about areas you can’t get to?
They’re marked on the report. In ductwork, new access panels are often the answer, and we can fit those.
Do you look at the system first?
Yes, always. Diagnosis comes before treatment: the survey shows what needs doing and what access we need and the fixed quote is built on it.
Why survey before a clean?
It’s a look at the whole extract before it’s cleaned, with readings and photos. The survey can be done from pictures and details or on site, as suits the job.
What do the grease readings need to be?
Between cleans, the mean should stay at 200 microns or below, and anywhere at 500 microns or more needs spot cleaning straight away.
How much time does an inspection need?
Typically, the inspection takes a morning or less for one kitchen, more where there are several systems. The size of the system and the access make the difference.
Places near Sandhurst Cross
Also in Sandhurst Cross
Landlords, agents and facilities managers
Under the Regulatory Reform (Fire Safety) Order 2005, the responsible person must assess and reduce fire risk, which may be the employer, owner, landlord, FM or managing agent. With shared responsibility, good records help everyone.
Where a tenant occupies the premises but the landlord owns the building, the lease normally sets out who maintains what. We are happy to deal with either side, and the report can go to both.
When it’s something else
Not every problem is solved by TR19 inspection, and we’d rather say so up front. It will not put right:
- Ductwork that was designed or installed badly
- Hidden runs that need access panels first
- Fire safety duties beyond the extract system
If you’re not sure, just call 0345 646 2711 or send us an email and we’ll give you a straight answer.
What the work covers
- Post-clean checks
- Wet film thickness tests
- Pre-clean surveys
- Deposit thickness tests
- Insurer audits
- Access surveys