East Sussex · TR19 inspections and grease testing
TR19 Inspection in Penhurst
For TR19 inspections and grease testing in Penhurst, one call is all it takes, from survey to sign-off. Fully insured, with CHAS, SafeContractor and ISO 9001.
- Sites with gaps in their extract records
- Kitchens whose menu or hours have changed
- Insurance renewals needing proof of TR19 cleaning
How we handle TR19 inspection in Penhurst
Taking on a kitchen in Penhurst with no cleaning records? Start with an inspection. We survey the system, measure the grease and tell you what needs doing, before any cleaning is booked. The work covers post-clean checks, wet film thickness tests and pre-clean surveys, and common reasons people get in touch are extracts that have never been grease tested and insurers asking for TR19 evidence.
For a kitchen in or near Penhurst, the visit is planned around opening hours and the journey, and the clean covers the whole system, as it would anywhere: canopy, filters, duct, fan and discharge, with a certificate and photo report at the end.
For insurers and inspectors, the record counts. So every job comes with a written report and photos, and grease extract cleans come with a TR19® certificate issued through the BESCA Vent Hygiene Elite portal.
- Location
- Penhurst (TN33)
- Wider area
- East Sussex
- Records
- Certificate plus before-and-after pictures
- Quote
- Fixed quote, normally within a working day
- Hours
- After hours by arrangement; emergencies any time
- Telephone
- 0345 646 2711
- Updated
- 30 October 2026
TR19 inspection in Penhurst: the local picture
We cover Penhurst, about 45 miles from central London, as part of our work across London and the South East. We work evenings, overnight and at weekends, so the visit fits around the site. It’s Rother council that sends environmental health officers to food businesses in Penhurst. Extraction counts as kitchen equipment, so its condition can come up on the day. A dated certificate in the maintenance file answers the question before it’s asked.
Volunteers running a hall kitchen near The Parish Church of St Michael, or anywhere in Penhurst, may not know when the extract was last cleaned, and a grease test settles it. Healthcare kitchens, like those at hospitals such as Bexhill Hospital (about 5.8 miles south-east), often cook for long hours, which puts them in BESA’s heavier-use bands. Older buildings often hide long, awkward duct runs, and if you run a kitchen at a historic venue in the area (Bateman's is about 4.7 miles north), access may need planning.
Penhurst is about 6 miles north-west of Bexhill-on-Sea, in East Sussex. From the centre of Penhurst to the outskirts, we cover TR19 inspection for every kind of premises, from a single unit to a large public building. Across East Sussex, we cover 289 places, Penhurst among them. You can also see our page for Brighton, about 24 miles away.
Postcode districts we cover here for TR19 inspection: TN33. We also cover Steven's Crouch (2 miles south-east), Netherfield (2 miles north-east), Twelve Oaks (2 miles north), Hollingrove (3 miles north) and Brightling (3 miles north). We also work in nearby towns such as Eastbourne (11 miles south-west), Hastings (8 miles south-east), Bexhill-on-Sea (6 miles south-east), Hailsham (8 miles south-west), Crowborough (14 miles north-west) and St Leonards (8 miles south-east).
What’s near Penhurst
In Penhurst, that means kitchens and buildings near Ashburnham Park, among other places. The nearest railway station is Battle station, about 3.8 miles east. Other landmarks nearby include Battle Museum of Local History (3.2 miles east) and Bexhill Hospital (5.8 miles south-east). The countryside around Penhurst includes Senlac Hill.
Also near Penhurst
More services for Penhurst
Multi-site and managed buildings
Landlords, managing agents and facilities managers book us, not only the businesses that use the systems. Shared systems, like a riser serving several units, need a clear agreement on who books the work, and we’re happy to quote for all of it.
The Fire Safety Order 2005 puts the duty to manage fire risk on the responsible person, and that can be the employer, the owner, a landlord, a facilities manager or a managing agent. With shared responsibility, good records help everyone.
Common questions in Penhurst
Who inspects food businesses in Penhurst?
Food hygiene inspections in Penhurst are carried out by Rother council. It helps to keep the extract cleaning records with your food safety paperwork, so they’re ready if asked for.
Do you work in villages like Penhurst?
Yes, we work in villages as well as towns, and Penhurst is covered. A survey first, from photos or a visit, means we arrive with the right kit.
What is grease thickness testing?
Grease thickness testing measures the layer of grease on the duct surfaces, by WFTT or DTT. Each reading is recorded in microns.
What does a pre-clean survey involve?
We check the layout, the grease levels and the access, before anyone starts cleaning. Any access problems are flagged so they can be sorted first.
Do you work with multi-site operators?
Yes. Our area covers London and the South East, so we can schedule a run of sites as one programme. Each site gets its own report and photos.
How much notice should we give?
That depends on the slot you want and the size of the job. Mention your preferred dates with your enquiry, and if it’s an emergency, call us any time.
What does TR19 inspection cost?
Size, condition, access and working hours all affect the cost. Call for a fixed quote, typically ready within one working day.
Do you carry out TR19 audits for insurers?
Yes. Our TR19 audits cover readings, pictures, access and a recommended cleaning interval. You can pass it straight to your insurer or broker.
Why act early in Penhurst
Surveying first means the clean goes to plan. Missing access panels, hidden duct runs and awkward fans are found before the cleaners arrive, so the clean covers the whole system. Out of sight is the usual reason a rural system goes too long without attention.
Leaving it longer rarely makes the work cheaper. Problems in a system tend to grow, which can make the next visit longer. If you are not sure what’s needed, give us a ring on 0345 646 2711 or use the quote form for straight advice and a fixed quote.
Why book with us
- CHAS, SafeContractor and ISO 9001
- Out-of-hours work and a 24/7 emergency line
- Trading since 2009
- Each visit written up, with pictures
Read our cost guide and our accreditations and certificates.
Looking after it afterwards
Results last longer with the right care. Here’s what we suggest:
- Mention new equipment or longer hours at the next test
- Do not box in or cover duct access panels
- Have the latest report ready for insurance renewals
- Wipe the canopy surfaces regularly
If any reading is 500 microns or more, the report flags it for immediate spot cleaning, and we can arrange it.
Keep filters clean and in place. Gaps around filters let grease get past them.
What your team can do, and what needs us
Good housekeeping makes our visits easier, not unnecessary. Clean filters and tidy surfaces slow the build-up, but the parts you cannot see still need a specialist at the right interval.
Keep a record of what your team does. A dated log of in-house cleaning and checks shows an inspector that the system is looked after between visits, alongside our reports.
When it’s something else
We will always give you a straight diagnosis, so here’s what TR19 inspection won’t do:
- Removing the grease, which is a separate clean
- Parts of the duct nobody can reach yet
- Fire safety duties beyond the extract system
If in doubt, ring 0345 646 2711 or email us and we’ll say what we think.
Parts of the system we cover
- Post-clean checks
- Deposit thickness tests
- Access surveys
- Insurer audits
- Pre-clean surveys
- Wet film thickness tests
What we do, step by step
The visit has three parts: set-up, the treatment itself and the sign-off. Getting ready means protecting surfaces and switching off what needs to be off, and the sign-off is a written report with pictures. Most of the time goes on the work itself, and that takes an hour or two for a single kitchen, longer for a large or complex system. Visits to a village like Penhurst are booked in advance, at a time that suits whoever runs the site.
- First we book a time that won’t disrupt cooking.
- Every part of the system is examined, end to end.
- Grease readings are taken at set points using WFTT or DTT.
- Photos are taken at each point, and access gaps noted.
- We send a report setting out the readings, pictures and next steps.
Getting ready for the visit
- Arrange a key holder or contact on site
- Mention any sign-in, permit or induction we need
- Move anything stored near the system
Getting a quote
Some systems can be priced from photos; others need a survey. Big or complicated sites, and systems that are hard to see in photos, get a survey first. Either way, the quote is fixed before any work is booked.
Read more
Part by part
Canopy and plenum
Behind the filters, the plenum catches plenty of grease. Readings and pictures are taken in the plenum as part of every survey.
Schools, hospitals and care homes
Education kitchens need TR19 inspections like any other. Readings show if the interval is right.