Surrey · TR19 inspections and grease testing
TR19 inspections in Ockford Ridge
Our technicians work in Ockford Ridge on TR19 inspections, grease thickness testing, pre-clean surveys and post-clean verification. Out-of-hours visits, a fixed quote and a written report with photos as standard.
- Parts of the system left out of past cleans
- Insurance renewals needing proof of TR19 cleaning
- Kitchens taken over with no cleaning records
TR19 inspection in Ockford Ridge, done properly
A pre-clean survey looks at the whole system, from canopy to discharge. Access is checked along the full length, and record grease readings at set points. Common call-outs are for insurance renewals needing proof of TR19 cleaning and parts of the system left out of past cleans, on wet film thickness tests, access surveys and post-clean checks.
In a village or hamlet like Ockford Ridge, the kitchens that need extract cleaning are typically a pub, a school, a care home or a hall kitchen, wherever there is one. Each still has a canopy and duct that collect grease, whatever the size of the place.
Insurers, fire officers and environmental health officers all look at records. So every job comes with a written report and photos, plus a TR19® certificate through the BESCA VHE portal where the work is a TR19® Grease clean.
- Where
- Ockford Ridge (GU8)
- Region
- Surrey
- Reporting
- Certificate plus before-and-after pictures
- Quote
- A fixed price before work begins
- When we work
- After hours by arrangement; emergencies any time
- Phone
- 0345 646 2711
- Page updated
- 30 October 2026
What a clean won’t put right
Not every problem is solved by TR19 inspection, and we’d rather say so up front. It will not put right:
- Hidden runs that need access panels first
- Design faults in the extract system
- A faulty or failing extract fan
If you’re not sure, just ring 0345 646 2711 or drop us a line and we will give you a straight answer before booking.
Where we work
- Wet film thickness tests
- Insurer audits
- Deposit thickness tests
- Post-clean checks
- Access surveys
- Pre-clean surveys
TR19 inspection in Ockford Ridge: the local picture
There are about 5 restaurants, cafés and works canteens in and around Ockford Ridge, up to about a mile and a half out, according to the Food Standards Agency’s register. Where they cook under a canopy, a grease reading is the way to tell whether the extract is due a clean. Ockford Ridge is covered by Surrey Fire and Rescue Service. Its fire safety officers can audit commercial kitchens, and grease in the extract is part of a kitchen’s fire risk. It’s Waverley council that sends environmental health officers to food businesses in Ockford Ridge. They look at how clean the premises and equipment are, and the kitchen extract is part of that. A TR19® certificate and photo report after each clean gives you a record to show an inspector.
Volunteers running a hall kitchen near St John the Evangelist's Church, or anywhere in Ockford Ridge, may not know when the extract was last cleaned, and a grease test settles it. If you run a café or takeaway near Milford (Surrey) station, early starts and late finishes leave little time to clean, so overnight extract cleaning suits. Kitchens that cook twelve hours or more a day, as some healthcare kitchens do, fall into BESA’s three-monthly minimum; Milford Hospital is the nearest hospital to Ockford Ridge, about 0.8 miles north-east.
Ockford Ridge is about 2 miles south-west of Godalming, in Surrey. Whether your site is in the middle of Ockford Ridge or further out, TR19 inspection is available to all kinds of commercial premises, from small sites to large estates. Ockford Ridge is one of 395 places in Surrey where we work for commercial clients. We also work in Guildford, about 7 miles from Ockford Ridge.
We work across the GU8 postcode area for TR19 inspection and the roads nearby. If you need TR19 inspection at premises on Rake Lane and Station Lane or a nearby road, we can help. If your site is just outside Ockford Ridge, we cover Enton Green (1 mile east), Witley (1 mile south-west), Cramhurst (1 mile west), Mousehill (1 mile north-west) and Tuesley (1 mile north-east). Further out, we also cover Guildford (7 miles north-east), Woking (11 miles north), Camberley (13 miles north), Farnham (8 miles north-west), Dorking (14 miles east) and Frimley (11 miles north).
Near you in Ockford Ridge
Around Ockford Ridge, our work takes us to kitchens and buildings near Rodborough Common, The Chandler CofE Aided Junior School and The Star Public House and the streets around them. Ockford Ridge has its own railway station: Milford (Surrey) station. A little further out are Godalming Museum (2 miles north-east) and Milford Hospital (0.8 miles north-east). The countryside around Ockford Ridge includes Hydon's Ball and Farncombe Wood.
Ockford Ridge questions
Do you cover smaller places like Ockford Ridge?
Yes. Villages and rural sites across the South East are part of our work, Ockford Ridge included. A survey first, from photos or a visit, means we arrive with the right kit.
Which council inspects kitchens in Ockford Ridge?
The local authority for Ockford Ridge is Waverley council, and its environmental health team does the inspecting. Have your latest TR19® certificate and photo report to hand, as an officer may ask how the extract is maintained.
What types of premises do you cover?
Any site with a kitchen or a ventilation system to look after, from a single café to a large school. Hotels, schools, care homes, offices, shops and leisure sites are all part of our work.
What is post-clean verification?
A post-clean check records grease readings and pictures after the work, whoever did the clean.
When should we have our next grease test?
Often enough to know the mean stays under 200 microns between cleans. The readings themselves tell you if the interval needs to change.
How much notice do you need?
Book as early as you can for planned work, especially if the next clean or test is due soon. For emergencies, we take calls 24/7.
How do you measure grease in a kitchen extract?
Grease thickness testing measures the layer of grease on the duct surfaces, by WFTT or DTT. Each reading is recorded in microns.
Can you come out in an emergency?
Yes, 24/7. Our office is open from 8am to 6pm on weekdays, and the emergency line covers the rest.
Looking after it afterwards
Think of this as the after-treatment advice, short and simple:
- Keep to the recommended interval
- Clean or swap grease filters as often as the kitchen needs
- Mention new equipment or longer hours at the next test
- Keep TR19 certificates, readings and reports together
Keep the verification report next to the certificate it relates to. The pair gives a clear record of the clean and the check.
Keep certificates, reports and readings in one place so the history is easy to show.
More services for Ockford Ridge
Different parts, different methods
Vertical risers
Access to risers is often limited. We record what can and cannot be reached.
Extract fan and discharge
A greasy fan works harder and wears faster. Readings show if it needs attention before the next clean.
What affects the cost of TR19 inspection
There’s no set price list, because sites vary so much. The quote depends on:
- Whether several sites go on one quote
- Where the site is and how we reach it
- When the work can happen, such as evenings, overnight or weekends
- The scale of the work
Working hours, access and the scale of the site all affect the cost. Each of those is built into the quote and give you a fixed price before work begins.
What we need to know
The more you tell us, the more accurate the quote. When you get in touch, it helps to send:
- Detail shots of panels, filters and grilles
- Problems your staff have spotted
- The paperwork from the last visit, if you have it
- Photos showing the whole system and its surroundings
For a fixed quote, call 0345 646 2711 or send us an email with the site type, your trading hours and a short description of the system. Photos and the last report, if you have one, make the quote quicker. You’ll normally have a quote within one working day.
Why act early in Ockford Ridge
Catching heavy deposits early keeps the fix small. Ignored, the layer only gets thicker. In a small place like Ockford Ridge, a system that fails can take a site out of use.
Kitchens, offices, schools and hospitals are all priced the same way: how much there is, how we reach it, what state it’s in and when we can work. Call for a fixed quote and we’ll explain each part.
What you get with us
- Fixed quotes from a survey or pictures
- Accredited under CHAS and SafeContractor, with ISO 9001
- Ventilation hygiene specialists since 2009
- A written report with photos after each visit
How the visit works
Protection comes first: floors, worktops and anything near the work are covered. Then we make the system safe and start. It takes an hour or two for a single kitchen, longer for a large or complex system, and the area is cleaned down before we leave. Somewhere like Ockford Ridge, lanes, gates and parking are worth mentioning in advance.
- Post-clean verification is booked once the clean is done.
- The same access points are opened up.
- We repeat the WFTT or DTT readings.
- We photograph each area to record how it was left.
- The results are reported, with anything missed flagged.
Before we arrive
- Mention any parking or loading restrictions
- Tell us about site rules, permits or sign-in
- Find the previous report, if there is one
Getting a quote
To help us quote: where the site is, what it is and its opening hours, a few photos and any previous report or certificate. Then give us a ring on 0345 646 2711 or send us an email.
Related advice
In-house cleaning or a specialist?
Day-to-day cleaning is something your team can do: wiping canopies, washing grease filters and recording it in a log. Inside the ducts, risers and fan is specialist work, and that’s where we come in.
If your staff spot something between visits, like drips, unusual noise, smells or damaged filters, they should report it rather than try to fix it. We will take a look and send you a fixed quote.